43.060.50 标准查询与下载
共找到 429 条与 相关的标准，共 29 页
Road vehicles－M18×1.5 spark-plugs with conical seatingand their cylinder head housing
- ICS
- 43.060.50
- CCS
- 发布
- 2013-11-25
- 实施
Road vehicles－M14×1.25 compact spark-plugs with conical seatingand their cylinder head housing
- ICS
- 43.060.50
- CCS
- 发布
- 2013-11-25
- 实施
Road vehicles－M12×1.25 spark-plugs with flat seatingand their cylinder head housings
- ICS
- 43.060.50
- CCS
- 发布
- 2013-11-25
- 实施
Road vehicles－M10×1 spark-plugs with flat seatingand their cylinder head housings
- ICS
- 43.060.50
- CCS
- 发布
- 2013-11-25
- 实施
This International Standard specifies the main properties and dimensions of spark-plugs, including the terminals and the dimensions of their cylinder head housings, for use with spark-ignition engines. This International Standard does not cover screened and waterproof spark-plugs (see ISO 3412,ISO 3895, and ISO 3896).
Road vehicles - Spark-plugs and their cylinder head housings - Basic characteristics and dimensions
- ICS
- 43.060.50
- CCS
- T37
- 发布
- 2013-11-15
- 实施
Mounting dimensions of distributors for automobiles
- ICS
- 43.060.50
- CCS
- 发布
- 2013-11-04
- 实施
Road vehicles－M14×1.25 spark－plugs with flat seating and 16 mm hexagon and their cylinder head housings
- ICS
- 43.060.50
- CCS
- 发布
- 2013-11-04
- 实施
This part of ISO 6550 specifies the main characteristics of MlO sheath-type glow-plugs with conical seating and their cylinder head housing, for use with diesel (compression-ignition) engines.
Road vehicles.Sheath-type glow-plugs with conical seating and their cylinder head housing.Part 3: M10 glow-plugs
- ICS
- 43.060.50
- CCS
- T37
- 发布
- 2013-11
- 实施
Road vehicles. Sheath-type glow-plugs with conical seating and their cylinder head housing. M10 glow-plugs
- ICS
- 43.060.50
- CCS
- T37
- 发布
- 2013-10-31
- 实施
- 2013-10-31
This SAE Standard describes guarding to help prevent hazardous machine movement caused by activation of the starter motor by bypassing the starter control system. This document is applicable to off-road, self-propelled work machines, as identified in SAE J1116 and Agricultural Tractors as defined in ANSI/ASAE S390 which have the potential for hazardous machine movement as a result of bypassing the starter control system and powering of the starter motor.
Guarding of Starter System Energization
- ICS
- 43.060.50
- CCS
- 发布
- 2013-09-30
- 实施
- 2013-10-04
This part of ISO 9457 specifies the metric modules, pressure angles, number of teeth and other tooth characteristics which are necessary to ensure interchangeability of currently used starter motor pinions (those with a pressure angle of 14° 30′) used for starter motors mounted on reciprocating internal combustion engines for road vehicles.
Road vehicles -- Metric starter motor pinions -- Part 1: Currently used pinions
- ICS
- 43.060.50
- CCS
- 发布
- 2013-09-09
- 实施
This International Standard specifies the mounting dimensions necessary for interchangeability of hinge-mounted alternators for reciprocating internal combustion engines in commercial vehicles and buses. It applies to alternators of types 1, 2 and 3, where type 3 is designed only for mounting on rigid fixtures. It may be used for other engine applications where no specific standards exist.
Commercial vehicles and buses -- Mounting dimensions for alternators of types 1, 2 and 3
- ICS
- 43.060.50
- CCS
- 发布
- 2013-09-09
- 实施
This International Standard specifies the main properties and dimensions of spark-plugs, including the terminals and the dimensions of their cylinder head housings, for use with spark-ignition engines. This International Standard does not cover screened and waterproof spark-plugs (see ISO 3412, ISO 3895 and ISO 3896).
Road vehicles -- Spark-plugs and their cylinder head housings -- Basic characteristics and dimensions
- ICS
- 43.060.50
- CCS
- 发布
- 2013-09-09
- 实施
This International Standard specifies the dimensions of dry ignition coils using a rotating high-voltage distributor. It applies to ignition systems for spark-ignited internal combustion engines of road vehicles.
Road vehicles -- Dry ignition coils using rotating high-voltage distributor
- ICS
- 43.060.50
- CCS
- 发布
- 2013-09-09
- 实施
Abstract Establishes the mounting dimensions for interchangeability of starter motors mounted on internal combustion engines. Applies to starter motors, types 1 to 4, sizes "A" and "B". May be used for other engine applications where no specific standards exist. Some figures illustrate shapes and reference quantities of concern.
Commercial vehicles and buses -- Mounting dimensions for starter motors of types 1, 2, 3 and 4
- ICS
- 43.060.50
- CCS
- 发布
- 2013-09-09
- 实施
This International Standard specifies general requirements and test methods for sheath-type glow-plugs. Detailed test condition(s) and/or requirement(s) are agreed between the glow-plug manufacturers and the engine manufacturer. It is applicable to those sheath-type glow-plugs conforming to ISO 6550-1, ISO 6550-2, ISO 6550-3 and ISO 6550-4, used in compression ignition (diesel) engines.
Road vehicles -- Sheath-type glow-plugs -- General requirements and test methods
- ICS
- 43.060.50
- CCS
- 发布
- 2013-09-09
- 实施
This part of ISO 9457 specifies the metric modules, number of teeth and other tooth characteristics which are necessary to ensure interchangeability of starter motor pinions with a pressure angle of 20°, used on starter motors for reciprocating internal combustion engines for road vehicles.
Road vehicles -- Metric starter motor pinions -- Part 2: Pinions with 20 degree pressure angle
- ICS
- 43.060.50
- CCS
- 发布
- 2013-09-09
- 实施
Dynamic modules - Part 6-2: Design guide - Software and hardware interfaces - Survey results
- ICS
- 43.060.50
- CCS
- 发布
- 2013-08-06
- 实施
Road vehicles－Sheath-type glow-plugs－General requirements and test methods
- ICS
- 43.060.50
- CCS
- 发布
- 2013-08-05
- 实施
이 표준은 디젤(압축 착화) 엔진에 사용되는 원추형 시트를 가진 M10 시스형 예열 플러그와 이들의실린더 헤드 하우징의 주요 특성에 대하여 규정한다.
Road vehicles-Sheath-type glow-plugs with conical seating and their cylinder head housing-Part 3:M10 glow-plugs
- ICS
- 43.060.50
- CCS
- T39
- 发布
- 2013-08-05
- 实施
- 2013-08-05
