43.120 电车 标准查询与下载

BS EN IEC 63119-2:2022 电动汽车充电漫游服务信息交换-用例

This part of IEC 63119 specifies roaming use cases of information exchange between EV charging service providers (CSP), charging station operators (CSOs) and clearing house platforms through roaming endpoints. The elementary use cases defined in this document are designed to support the user to have access to the EV supply equipment which does not belong to the home-CSP. exchange/interaction between different CSPs, as well as between a CSP and CSO with or without clearing house platform through the roaming endpoint. and charging station operator (CSO) or between EV and CS.

Information exchange for electric vehicle charging roaming service - Use cases

ISO 15118-9:2022 道路车辆.车辆到电网通信接口.第9部分:无线通信的物理和数据链路层一致性试验

This document specifies conformance tests in the form of an abstract test suite (ATS) for a system under test (SUT) implementing an electric-vehicle or supply-equipment communication controller (EVCC or SECC) with support for WLAN-based high-level communication (HLC) according to ISO 15118-8 and against the background of ISO 15118-1. These conformance tests specify the testing of capabilities and behaviours of an SUT, as well as checking what is observed against the conformance requirements specified in ISO 15118-8 and against what the implementer states the SUT implementation's capabilities are. The capability tests within the ATS check that the observable capabilities of the SUT are in accordance with the static conformance requirements defined in ISO 15118-8. The behaviour tests of the ATS examine an implementation as thoroughly as practical over the full range of dynamic conformance requirements defined in ISO 15118-8 and within the capabilities of the SUT (see NOTE below). A test architecture is described in correspondence to the ATS. The abstract test cases in this document are described leveraging this test architecture and are specified in descriptive tabular format for the ISO/OSI physical and data link layers (layers 1 and 2). In terms of coverage, this document only covers normative sections and requirements in ISO 15118-8. This document can additionally refer to specific tests for requirements on referenced standards (e.g. IEEE, or industry consortia standards, like WiFi Alliance) as long as they are relevant in terms of conformance for implementations according to ISO 15118-8. However, it is explicitly not intended to widen the scope of this conformance specification to such external standards, if it is not technically necessary for the purpose of conformance testing for ISO 15118-8. Furthermore, the conformance tests specified in this document do not include the assessment of performance nor robustness or reliability of an implementation. They cannot provide judgments on the physical realization of abstract service primitives, how a system is implemented, how it provides any requested service, nor the environment of the protocol implementation. Furthermore, the abstract test cases defined in this document only consider the communication protocol and the system's behaviour defined ISO 15118-8. The power flow between the EVSE and the EV is not considered. NOTE Practical limitations make it impossible to define an exhaustive test suite, and economic considerations can restrict testing even further. Hence, the purpose of this document is to increase the probability that different implementations are able to interwork. This is achieved by verifying them by means of a protocol test suite, thereby increasing the confidence that each implementation conforms to the protocol specification. However, the specified protocol test suite cannot guarantee conformance to the specification since it detects errors rather than their absence. Thus, conformance to a test suite alone cannot guarantee interworking. Instead, it gives confidence that an implementation has the required capabilities and that its behaviour conforms consistently in representative instances of communication.

Road vehicles — Vehicle to grid communication interface — Part 9: Physical and data link layer conformance test for wireless communication

IEC 61980-3:2022 电动车辆无线电力传输（WPT）系统.第3部分:磁场无线电力传输系统的特殊要求

Electric vehicle wireless power transfer (WPT) systems - Part 3: Specific requirements for magnetic field wireless power transfer systems

ISO 6469-1:2019/Amd 1:2022 电动道路车辆.安全规范.第1部分:可再充电能量存储系统（RESS）.修改件1:热传播的安全管理

Electrically propelled road vehicles — Safety specifications — Part 1: Rechargeable energy storage system (RESS) — Amendment 1: Safety management of thermal propagation

IEC PAS 63454:2022 电动汽车传导充电-直流车辆耦合器配置GG

Conductive charging of electric vehicles - DC vehicle coupler configuration GG

KS R 9223-2022 通勤用电动轨道车车体设计的一般要求

Electric railcars for commuter use ― General requirement for design of bodies

IEC 62196-2:2022 插头、插座、车辆连接器和车辆插座.电动车辆的导电充电.第2部分:交流插脚和接触管附件的尺寸兼容性要求

Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 2: Dimensional compatibility requirements for AC pin and contact-tube accessories

IEC 62196-3:2022 插头、插座、车辆连接器和车辆插座.电动车辆的导电充电.第3部分:直流和交流/直流插针和接触管车辆耦合器的尺寸兼容性要求

Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 3: Dimensional compatibility requirements for DC and AC/DC pin and contact-tube vehicle c

IEC TS 62196-4:2022 插头、插座、车辆连接器和车辆入口.电动车辆的导电充电.第4部分:II类或III类应用的直流插脚和接触管附件的尺寸兼容性和互换性要求

Plugs, socket-outlets, vehicle connectors and vehicles inlet - Conductive charging of electric vehicles - Part 4: Dimensional compatibility and interchangeability requirements for DC pin and contact-t

IEC 63119-2:2022 电动汽车充电漫游服务信息交换 第2部分:用例

Information exchange for electric vehicle charging roaming service？- Part 2: Use cases

IEC 60335-2-114:2022 家用和类似用途电器 安全 第 2-114 部分：个人电动运输车的特殊要求

Household and similar electrical appliances - Safety - Part 2-114: Particular requirements for Personal-e-Transporters

22/30423349 DC BS ISO 8714 电动道路车辆 参考能耗及范围 乘用车和轻型商用车试验程序

BS ISO 8714. Electric road vehicles. Reference energy consumption and range. Test procedures for passenger cars and light commercial vehicles

BS ISO 23828:2022 燃料电池公路车辆 能耗测量 以压缩氢气为燃料的车辆

1   Scope This document specifies the procedures for measuring the energy consumption and driving range of fuel cell passenger cars and light-duty trucks that use compressed hydrogen.

Fuel cell road vehicles. Energy consumption measurement. Vehicles fuelled with compressed hydrogen

T/BJQC 202201-2022 建筑垃圾运输车辆安全管理技术要求

主要包括： 1 范围、 2 规范性引用文件、3 术语和定义、4 一般要求 、5 新能源车辆动力、安全要求、6 车箱结构与密闭、7 车辆智能安全系统 、8 车辆外观与标识、9 车辆检验。  附录 A（规范性） 通讯协议、附录 B（规范性） 驾驶室外部顶灯样式、附录 C（规范性） 放大号牌及新能源标识要求、附录 D（资料性） 车辆外观及颜色、附录 E（规范性） 新车检验。

Technical requirements for safety management of construction waste transportation vehicles

T/CSAE 270-2022 燃料电池电动汽车运行安全监管规范

本文件规定了燃料电池电动汽车数据采集以及安全运行技术要求。 本文件适用于使用压缩气态氢的燃料电池电动乘用车、商用车及特殊作业车。

Monitoring and management specifications for safe operation of fuel cell electric vehicles

BS EN IEC 61851-1:2019 电动汽车传导充电系统通用要求

Electric vehicle conductive charging system - General requirements

BS EN ISO 15118-20:2022 道路车辆 车辆到电网通信接口 第20部分：第二代网络层和应用层要求

1   Scope This document specifies the communication between the electric vehicle (EV), including battery electric vehicle (BEV) and plug-in hybrid electric vehicle (PHEV), and the electric vehicle supply equipment (EVSE). The application layer messages defined in this document are designed to support the electricity power transfer between an EV and an EVSE. This document defines the communication messages and sequence requirements for bidirectional power transfer. This document furthermore defines requirements of wireless communication for both conductive charging and wireless charging as well as communication requirements for automatic connection device and information services about charging and control status. The purpose of this document is to detail the communication between an electric vehicle communication controller (EVCC) and a supply equipment communication controller (SECC). Aspects are specified to detect a vehicle in a communication network and enable an Internet Protocol (IP) based communication between the EVCC and the SECC (see Figure 1). Figure 1 — Communication relationship among the EVCC, SECC and SA Key ...

Road vehicles - Vehicle to grid communication interface - Part 20: 2nd generation network layer and application layer requirements

T/CSAE 262-2022 电动汽车电池管理系统用故障注入测试规范

本文件规定了电动汽车电池管理系统用故障注入测试的测试条件及要求、测试方法及测试结果判定要求等。 本文件适用于电动汽车用锂离子动力蓄电池和镍氢蓄电池的管理系统，其他类型动力蓄电池的管理系统及其他类型车辆的动力蓄电池管理系统可参照执行。

Fault injection test specification for battery management system of electric vehicles

T/CSAE 263-2022 电动汽车驱动电机系统控制器故障注入测试规范

本文件规定了电动汽车驱动电机系统故障测试的测试条件及要求、测试方法及测试结果判定要求等。 本文件适用于符合GB/T 18488.1—2015规定的驱动电机系统。

Fault injection test specification for driving motor system controller of electric vehicles

ISO 23828:2022 燃料电池道路车辆.能量消耗测量.使用压缩氢燃料的车辆

This document specifies the procedures for measuring the energy consumption and driving range of fuel cell passenger cars and light-duty trucks that use compressed hydrogen.

Fuel cell road vehicles — Energy consumption measurement — Vehicles fuelled with compressed hydrogen