45.060 铁路车辆 标准查询与下载
共找到 497 条与 铁路车辆 相关的标准，共 34 页
This part of IEC 60349 applies to converter-fed alternating current motors forming part of the equipment of electrically propelled rail and road vehicles.
Electric traction - Rotating electrical machines for rail and road vehicles - Part 2: Electronic converter-fed alternating current motors
- ICS
- 45.060
- CCS
- 发布
- 2014-12-25
- 实施
This part of IEC 61992 covers d.c. metal-enclosed and non-metallic enclosed switchgear assemblies used in indoor stationary installations of traction systems, with nominal voltage not exceeding 3 000 V. It is intended that individual items of equipment, for example circuit breakers, housed in the assembly are designed, manufactured and individually tested (simulating the enclosure when necessary) in accordance with their respective parts of IEC 61992 or, when appropriate, with another applicable standard. NOTE 1 The requirements covered in this part of IEC 61992 are those concerning the assembly as such, its enclosure and the mutual influence of the equipment enclosed. NOTE 2 EMC requirements are covered by IEC 62236-5 and additional requirements concerning dependability (RAMS) are covered by IEC 62278.
Railway applications - Fixed installations - DC switchgear - Part 6: DC switchgear assemblies
- ICS
- 45.060
- CCS
- 发布
- 2014-12-25
- 实施
IEC 61991 offers a set of rules that are applied in the design and manufacture of electrical installations and equipment to be used on rolling stock so as to protect the persons from electric shocks. The methods used to satisfy the rules may differ, in accordance with the procedures and practices of the operating organization. IEC 61991 is applicable to vehicles of rail transport systems, road vehicles powered by an external supply (trolley buses), magnetic levitated vehicles and to the electrical equipment installed in these vehicles. This standard does not apply to – mine railways in underground mines; – crane installations, moving platforms and similar transport systems on rails; – funicular railways; – temporary constructions. Testing of vehicles against the requirements of IEC 61991 is not included. For this, refer to IEC 61133.
Railway applications - Rolling stock - Protective provisions against electrical hazards
- ICS
- 45.060
- CCS
- 发布
- 2014-12-25
- 实施
이 표준은 화차가 완성된 후에 실시하는 공통적 검사 사항에 대하여 규정한다.
General rules for the inspection of freight cars on complection of construction
- ICS
- 45.060
- CCS
- 发布
- 2014-10-20
- 实施
- 2014/10/20
本标准规定了中低速磁浮交通车辆悬浮控制系统的系统组成、环境条件、要求、检验与试验方法、检验规则、标识、包装、贮存与质量保证。本标准适用于中低速磁浮交通车辆(简称车辆)悬浮控制系统的制造、试验和验收。
Technical specification of system for the levitation control of medium-low speed maglev transportation vehicle
- ICS
- 45.060
- CCS
- S51
- 发布
- 2014-07-14
- 实施
- 2014-12-01
IEC 61375-3-4:2014 specifies the data communication network inside a Consist based on Ethernet technology, the Ethernet Consist Network (ECN). The applicability of this part of IEC 61375 to the Consist Network allows for interoperability of individual vehicles within Open Trains in international traffic. This part of IEC 61375 may be additionally applicable to closed trains and Multiple Unit Trains when so agreed between purchaser and supplier.
Electronic railway equipment - Train communication network (TCN) - Part 3-4: Ethernet Consist Network (ECN)
- ICS
- 45.060
- CCS
- 发布
- 2014-05-09
- 实施
- 2014-07-23 (7)
Railway applications - Procedure to determine the performance requirements for radio systems applied to radio-based train control systems
- ICS
- 45.060
- CCS
- S61
- 发布
- 2014-04-10
- 实施
Coupling hoses for railway rolling stock. Specifications
- ICS
- 45.060
- CCS
- 发布
- 2014
- 实施
- 2015-07-01
IEC 62313:2009 is intended to be used to set up the requirements for the acceptance of rolling stock on infrastructure in the field of: - co-ordination of protection principles between power supply and traction units, especially fault discrimination for short-circuits; - co-ordination of installed power on the line and power demand of the trains; - co-ordination of traction unit regenerative braking and power supply receptivity; - co-ordination of harmonic behaviour.
Railway applications - Power supply and rolling stock - Technical criteria for the coordination between power supply (substation) and rolling stock
- ICS
- 45.060
- CCS
- 发布
- 2013-12-31
- 实施
IEC 62505-3-1:2009 provides assistance, guidance and requirements in the design of protection, control and measuring systems in a.c. installations at traction voltages (see IEC 60850) intended to provide a power supply to traction systems. This application guide identifies the characteristics and parameters of equipment used in the measurement, control and protection of a.c. traction systems. Guidance is given in the correct use of protection.
Railway applications - Fixed installations - Particular requirements for a.c. switchgear - Part 3-1: Measurement, control and protection devices for specific use in a.c. tractions systems - Application guide
- ICS
- 45.060
- CCS
- 发布
- 2013-12-31
- 实施
IEC 61881-2:2012 applies to d.c. aluminium electrolytic capacitors (cell, module and bank) for power electronics intended to be used on rolling stock. It specifies quality requirements and tests, safety requirements, and describes installation and operation information.
Railway applications - Rolling stock equipment - Capacitors for power electronics - Part 2: Aluminium electrolytic capacitors with non-solid electrolyte
- ICS
- 45.060
- CCS
- 发布
- 2013-12-31
- 实施
IEC 61881-3:2012 applies to d.c. electric double-layer capacitors (cell, module and bank) for power electronics intended to be used on rolling stock. It specifies quality requirements and tests, safety requirements, and describes installation and operation information.
Railway applications - Rolling stock equipment - Capacitors for power electronics - Part 3: Electric double-layer capacitors
- ICS
- 45.060
- CCS
- 发布
- 2013-12-31
- 实施
IEC 62505-1:2009 is applicable to single-phase a.c. one-pole circuit-breakers designed for indoor or outdoor fixed installations for operation at frequencies of 16,7 Hz, 50 Hz and 60 Hz on traction systems having an UNm above 1 kV up to 52 kV.
Railway applications - Fixed installations - Particular requirements for a.c. switchgear - Part 1: Single-phase circuit-breakers with Un above 1 kV
- ICS
- 45.060
- CCS
- 发布
- 2013-12-31
- 实施
IEC 62505-2:2009 is applicable to single-phase a.c. one-pole disconnectors, earthing switches and switches (switch-disconnectors and general purpose switches) designed for indoor or outdoor fixed installations for operation at frequencies of 16,7 Hz, 50 Hz and 60 Hz on traction systems having an UNm above 1 kV up to 52 kV.
Railway applications - Fixed installations - Particular requirements for a.c. switchgear - Part 2: Single-phase disconnectors, earthing switches and switches with Un above 1 kV
- ICS
- 45.060
- CCS
- 发布
- 2013-12-31
- 实施
IEC 62498-2:2010 deals with the environmental influences on fixed electrical installations for traction power supply and equipment essential to operate a railway: - in open air; - in covered areas; - in tunnels; - within enclosures placed in the above-mentioned areas. Such influences include altitude, temperature and humidity, air movement, rain, snow, hail, ice, sand, solar radiation, lightning, pollution, vibration, shocks, EMC and earthquakes. The contents of the corrigendum of November 2010 have been included in this copy.
Railway applications - Environmental conditions for equipment - Part 2: Fixed electrical installations
- ICS
- 45.060
- CCS
- 发布
- 2013-12-31
- 实施
IEC 62590:2010 specifies the requirements for the performance of all fixed installations electronic power converters, using controllable and/or non-controllable electronic valves, intended for traction power supply. The devices can be controlled by means of current, voltage or light. Non-bistable devices are assumed to be operated in the switched mode.
Railway applications - Fixed installations - Electronic power converters for substations
- ICS
- 45.060
- CCS
- 发布
- 2013-12-31
- 实施
IEC 62505-3-2:2009 gives particular requirements for current transformers used in a.c. single-phase railway applications, fixed installations. Applies to current transformers used at traction voltages and frequencies according to IEC 60850.
Railway applications - Fixed installations - Particular requirements for a.c. switchgear - Part 3-2: Measurement, control and protection devices for specific use in a.c. traction systems - Single-phase current transformers
- ICS
- 45.060
- CCS
- 发布
- 2013-12-31
- 实施
IEC 62498-1:2010 covers the use of on board electrical, electromechanical and electronic equipment for rolling stock, for the following parameters: - altitude, - temperature, - humidity, - air movement, - rain, - snow and hail, - ice, - solar radiation, - lightning, - pollution, - vibrations and shocks, - electromagnetic interference environment, - acoustic noise environment, - supply system characteristics. IEC 62498-1 defines: - interface conditions between the vehicle and its environment; - general environmental rules for the equipment of rolling stock, especially for the main sub-systems. The contents of the corrigendum of November 2010 have been included in this copy.
Railway applications - Environmental conditions for equipment - Part 1: Equipment on board rolling stock
- ICS
- 45.060
- CCS
- 发布
- 2013-12-31
- 实施
IEC 62498-3:2010 covers the design and the use of equipment and any portable equipment for signalling and telecommunications systems (including test, measure, monitoring equipment, etc.). The contents of the corrigendum of November 2010 have been included in this copy.
Railway applications - Environmental conditions for equipment - Part 3: Equipment for signalling and telecommunications
- ICS
- 45.060
- CCS
- 发布
- 2013-12-31
- 实施
IEC 62499:2008 gives rules for testing methods for carbon contact strips. The purpose is to demonstrate that the carbon contact strip construction, by attachment to integral supporting structure (carrier) but excluding bolted assembly, is fit for purpose.
Railway applications - Current collection systems - Pantographs, testing methods for carbon contact strips
- ICS
- 45.060
- CCS
- 发布
- 2013-12-31
- 实施
