47.020.80 起居舱室 标准查询与下载

GB/T 23913.2-2009 复合岩棉板耐火舱室.第2部分:天花板

GB/T 23913的本部分规定了复合岩棉板耐火舱室中天花板的分类和标记、要求、试验方法和检验规则等。 本部分适用于船舶和海洋工程建筑物上具有耐火分隔要求的舱室和生活模块中天花板的设计、制造和验收。

Fire-resisting compartment of composite rock wool panel.Part 2:Ceiling panel

GB/T 23913.6-2009 复合岩棉板耐火舱室.第6部分:安装节点

GB/T 23913的本部分规定了复合岩棉板耐火舱室的安装节点的典型型式。 本部分适用于船舶和海洋工程建筑物上具有耐火分隔要求的舱室和生活模块的安装节点的设计、制造和验收。

Fire-resisting compartment of composite rock wool panel.Part 6:Detail of installation

GB/T 23913.5-2009 复合岩棉板耐火舱室.第5部分:塑料装饰件

GB/T 23913的本部分规定了复合岩棉板耐火舱室中塑料装饰件的型式、要求、试验方法和检验规则等。 本部分适用于船舶和海洋工程建筑物上具有耐火分隔要求的舱室和生活模块中塑料装饰件的设计、制造和验收。

Fire-resisting compartment of composite rock wool panel.Part 5:Plastic decoration parts

GB/T 23913.1-2009 复合岩棉板耐火舱室.第1部分:衬板、隔板和转角板

GB/T 23913的本部分规定了复合岩棉板耐火舱室中衬板、隔板和转角板的分类和标记、要求、试验方法、检验规则等。 本部分适用于船舶和海洋工程建筑物上具有耐火分隔要求的舱室和生活模块中衬板、隔板和转角板的设计、制造和验收。

Fire-resisting compartment of composite rock wool panel.Part 1:Lining panel,partition panel and corner panel

GB/T 23913.3-2009 复合岩棉板耐火舱室.第3部分:防火门

GB/T 23913的本部分规定了复合岩棉板耐火舱室中防火门的分类和标记、要求、试验方法、检验规则等。 本部分适用于船舶和海洋工程建筑物上具有耐火分隔要求的舱室和生活模块中防火门的设计、制造和验收。

Fire-resisting compartment of composite rock wool panel.Part 3:Fire door

GB/T 23913.4-2009 复合岩棉板耐火舱室.第4部分:构架件

GB/T 23913的本部分规定了复合岩棉板耐火舱室中构架件的分类和标记、要求、试验方法、检验规则等。 本部分适用于船舶和海洋工程建筑物上具有耐火分隔要求的舱室和生活模块中构架件的设计、制造和验收。

Fire-resisting compartment of composite rock wool panel.Part 4:Profile

GB/T 8241-1987 船舶舱室设备术语

船舶舱室设备术语

Terminology for ship accommodation equipment

GB/T 7386.4-1987 船舶起居舱室的尺度协调 主要家具设备的协调尺寸

船舶起居舱室的尺度协调主要家具设备的协调尺寸

Co-ordination of dimensions in ships' accommodation--Co-ordinating sizes for key components

GB/T 7386.3-1987 船舶起居舱室的尺度协调 元件和组件尺寸的选择及组装

船舶起居舱室的尺度协调元件和组件尺寸的选择及组装

Co-ordination of dimensions in ships' accommodation--Selection of components and assemblies sizes and assembly

GB/T 7386.2-1987 船舶起居舱室的尺度协调 控制尺度及元件定位

本标准适用于船舶起居舱室尺度协调中所要求的控制尺度及元件定位。

Co-ordination of dimensions in ships' accommodation--Controlling dimensions and location of components

GB/T 7386.1-1987 船舶起居舱室的尺度协调 尺度协调的原则

本标准适用于下列国家标准： GB7386.2-87《船舶起居舱室的尺度协调控制尺度及元件定位》 GB7386.3-87《船舶起居舱室的尺度协调元件和组件尺寸的选择及组装》 GB7386.4-87《船舶起居舱室的尺度协调主要家具设备的协调尺寸》

Co-ordination of dimensions in ships' accommodation--Principles of dimensional co-ordination

GB/T 1560-1979 船用通风系统管路和附件的公称通径

船用通风系统管路和附件的公称通径

Normal diameters for ventilation pipe line and accessories for ships metric series

ASTM F3257-17(2022) 为海上设施提供住宿服务的船舶的设计、建造和操作的标准指南

1.1 Objectives—Guidelines are provided for the design, construction, and operation of an Accommodation Service Vessel (ASV) intended to provide accommodation services to an offshore installation. The goal of these guidelines is to focus attention on the safety aspects of design. These guidelines are recommended for each vessel providing accommodation service to an offshore installation for more than 36 persons. 1.2 Relationship with Regulatory and Classification Standards—This guide covers information for designing, constructing and operating ASVs and includes considerations not generally addressed in classification or statutory requirements intended for traditional cargo or passenger ships. While portions of this guide may refer to standards, it is not intended to supersede any classification or statutory requirements. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Guide for Design, Construction, and Operation of Vessels Providing Accommodation Service to Offshore Installations

ISO 7547:2022 船舶和海上技术.船上起居舱和其他封闭舱室的空调和通风.设计条件和计算基础

This document specifies design conditions and methods of calculation for air-conditioning and ventilation of accommodation spaces on board seagoing merchant ships for all conditions, except those encountered in extremely cold or hot climates (i.e. with lower or higher conditions than those stated in 4.2 and 4.3). This document also provides special considerations for machinery control-rooms, wheelhouse, and dry provision store rooms in Annexes C, D and E. NOTE Statutory requirements, rules and regulations can be applicable to the individual ships concerned.

Ships and marine technology — Air-conditioning and ventilation of accommodation spaces and other enclosed compartments on board ships — Design conditions and basis of calculations

ASTM F826-22 船用钢制家具顶部标准规范

1.1 This specification covers the construction of steel furniture tops for use where invoked by other marine furniture specifications. 1.2 This specification applies to tops for furniture case goods only such as chests of drawers, log desks with cabinets, and so forth. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Tops, Furniture, Marine, Steel

ASTM F825-22 船用钢制抽屉、家具的标准规范

1.1 This specification covers the construction of steel furniture drawers for use where invoked by other marine furniture specifications. 1.2 This specification applies to all furniture drawers, except items requiring progressive drawers. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Drawers, Furniture, Marine, Steel

ASTM F822-22 船用钢制衣柜（雪纺）标准规范

1.1 This specification covers the construction of marine chests of drawers (chiffoniers) of steel construction to be used in staterooms and other spaces. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Chest of Drawers (Chiffonier), Steel, Marine

T/HEBQIA 008-2021 集装箱/撬装式海水淡化系统装置

本文件规定了集装箱/撬装式海水淡化系统装置的要求、试验方法、检验规则、标志、包装、运输和贮存。本文件适用于集装箱/撬装式的海水淡化装置。

Container/skid-mounted seawater desalination system device

ASTM F1427-21e1 双层床的消费者安全标准规范

1.1 This consumer safety specification establishes minimum requirements for the design and performance of bunk beds. It also contains requirements for labeling and instructional material. 1.2 This consumer safety specification is intended to minimize accidents to children resulting from normal use and reasonably foreseeable misuse or abuse of bunk beds. This consumer safety specification is written within the current state of the art of bunk bed technology and does not address bunk beds that are blatantly misused or are used in a careless manner that disregards warning statements and safety instructions provided with each bunk bed. 1.3 For the purpose of this consumer safety specification, a bunk bed (hereinafter referred to as a bed) is defined as any structure that includes at least one sleeping surface in which the underside of any of its foundations is over 30 in. (762 mm) from the floor. 1.4 This consumer safety specification does not address bunk beds for institutional use (for example, in prisons, military facilities, dormitories, and so forth). 1.5 The values stated in inch-pound units, as well as any specified ISO/ANSI standard hardware, are to be regarded as the standard. The values given in parentheses are for information only. 1.6 The following safety hazards caveat pertains only to the test methods portion, Section 5, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the 1 This consumer safety specification is under the jurisdiction of ASTM Committee F15 on Consumer Products and is the direct responsibility of Subcommittee F15.30 on Bunk Beds. Current edition approved April 1, 2021. Published April 2021. Originally approved in 1992. Last previous edition approved in 2019 as F1427 – 19. DOI: 10.1520/F1427-21E01. Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. 1 8QLYHUVLW\RI7RURQWR 8QLYHUVLW\RI7RURQWR SXUVXDQWWR/LFHQVH$JUHHPHQW1RIXUWKHUUHSURGXFWLRQVDXWKRUL]HG 'RZQORDGHGSULQWHGE\ &RS\ULJKWE\$670,QW O DOOULJKWVUHVHUYHG 7XH'HF*07 Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Consumer Safety Specification for Bunk Beds

ASTM F1427-21 双层床标准消费者安全规范

1.1?This consumer safety specification establishes minimum requirements for the design and performance of bunk beds. It also contains requirements for labeling and instructional material. 1.2?This consumer safety specification is intended to minimize accidents to children resul

Standard Consumer Safety Specification for Bunk Beds