59.120.20 络纱机器和设备 标准查询与下载
共找到 212 条与 络纱机器和设备 相关的标准，共 15 页
Textile machinery and accessories — Beams for winding — Part 3: Weaver's beams
- ICS
- 59.120.20
- CCS
- 发布
- 2023-12-11
- 实施
本标准规定了单层拉幅定形机的型式、参数、要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于化纤、混纺织物及平幅针织物、针刺类非织造布的定形机，也适用于加工棉、毛、化纤及其混纺织物的拉幅机。
Single laryer heat-setting stenter
- ICS
- 59.120.20
- CCS
- W95
- 发布
- 2019-12-24
- 实施
- 0000-00-00
本标准规定了塑料粗纱筒管的术语和定义、分类和标记、基本要求、技术要求、试验方法、检验规则、标志、包装、运输和储存及质量承诺。 本标准适用于翼锭、悬锭粗纱机用塑料粗纱筒管（以下简称“粗纱管”）。
Plastic flyer bobbins
- ICS
- 59.120.20
- CCS
- C355
- 发布
- 2019-06-06
- 实施
- 2019-06-06
本标准规定了宝塔型绕线机的术语和定义、基本参数和主要特征、基本要求、技术要求、试验方法、检验规则、标识、包装、运输和贮存及质量承诺。 本标准适用于绣花线、缝纫线等成品线卷绕成筒的宝塔型绕线机（以下简称绕线机）。
Cone winding machine
- ICS
- 59.120.20
- CCS
- C355
- 发布
- 2018-10-19
- 实施
- 2019-02-28
本标准规定了塑料粗纱筒管的术语和定义、分类和标记、要求、试验方法、检验规则、包装、标志、运输和储存。 本标准适用于翼锭粗纱机用塑料粗纱筒管（以下简称“粗纱管”）。
Plastic flyer bobbins
- ICS
- 59.120.20
- CCS
- W90
- 发布
- 2016-10-22
- 实施
- 2017-04-01
This International Standard specifies the dimensions of the square section of bars of types A and B for winding devices relating to dyeing and finishing machines.
Textile machinery -- Square bars for winding devices relating to dyeing and finishing machines -- Dimensions
- ICS
- 59.120.20
- CCS
- 发布
- 2015-09-03
- 实施
This International Standard establishes terminology for warp creels and specifies their main dimensions. The pitches Ρ should be applied for simple warp creels and only for packages unwound overend. For magazine warp creels , the same pitches should be applied in the vertical direction, and twice-indicated values in the horizontal.
Textile machinery and accessories -- Warp creels -- Main dimensions
- ICS
- 59.120.20
- CCS
- 发布
- 2015-09-03
- 实施
This International Standard specifies the main dimensions and the corresponding tolerances of bobbins from plastics material, for open-leg type flyers.
Textile machinery and accessories -- Spinning machines -- Flyer bobbins
- ICS
- 59.120.20
- CCS
- 发布
- 2015-09-03
- 实施
This International Standard gives the definition of the left and right sides of pirn winders and cross winders used in the textile industry.
Textile machinery and accessories -- Pirn winders and cross winders -- Definition of left and right sides
- ICS
- 59.120.20
- CCS
- 发布
- 2015-09-03
- 实施
This part of ISO 3914 specifies the main dimensions, tolerances and designation of cylindrical tubes for tape yarns. Furthermore, directives are given for the characteristics of tubes and for the control of the inner diameter and length of the tube.
Textile machinery and accessories -- Cylindrical tubes -- Part 3: Dimensions, tolerances and designation of tubes for tape yarns
- ICS
- 59.120.20
- CCS
- 发布
- 2014-12-25
- 实施
This part of ISO 3914 specifies the main dimensions, tolerances and designation of cylindrical tubes of perforated tubes for cheese dyeing. Furthermore, directives are given for the characteristics of tubes and for the control of the inner diameter and length of the tube.
Textile machinery and accessories -- Cylindrical tubes -- Part 7: Dimensions, tolerances and designation of perforated tubes for cheese dyeing
- ICS
- 59.120.20
- CCS
- 发布
- 2014-12-25
- 实施
This part of ISO 3914 gives the recommended main dimensions of cylindrical tubes (inner diameters and lengths) used in the field of textile machinery.
Textile machinery and accessories -- Cylindrical tubes -- Part 1: Recommended main dimensions
- ICS
- 59.120.20
- CCS
- 发布
- 2014-12-25
- 实施
This part of ISO 8489 specifies the main dimensions, tolerances and designation of cones for cross winding with a half angle of cone 3° 30′. Furthermore, directives are given for the characteristics of cones and for the control of the diameters and lengths of the cone.
Textile machinery and accessories -- Cones for cross winding -- Part 2: Dimensions, tolerances and designation of cones with half angle 3 degrees 30'
- ICS
- 59.120.20
- CCS
- 发布
- 2014-12-25
- 实施
This part of ISO 3914 specifies the main dimensions, tolerances and designation of cylindrical tubes for textured yarns. Furthermore, directives are given for the characteristics of tubes and for the control of the inner diameter and length of the tube.
Textile machinery and accessories -- Cylindrical tubes -- Part 4: Dimensions, tolerances and designation of tubes for textured yarns
- ICS
- 59.120.20
- CCS
- 发布
- 2014-12-25
- 实施
This part of ISO 3914 specifies the main dimensions, tolerances and designation of cylindrical tubes for continuous spin-drawn synthetic filament yarns. This would include the spin-draw-texturizing process additionnally. Furthermore, directives are given for the characteristics of tubes and for the control of the inner diameter and length of the tube.
Textile machinery and accessories -- Cylindrical tubes -- Part 5: Dimensions, tolerances and designation of tubes for continuous spin-drawn synthetic filament yarns
- ICS
- 59.120.20
- CCS
- 发布
- 2014-12-25
- 实施
