59.120.20 络纱机器和设备 标准查询与下载
共找到 212 条与 络纱机器和设备 相关的标准，共 15 页
This part of ISO 3914 specifies the main dimensions, tolerances and designation of cylindrical tubes for continuous spin-drawn synthetic filament yarns. This would include the spin-draw-texturizing process additionnally. Furthermore, directives are given for the characteristics of tubes and for the control of the inner diameter and length of the tube.
Textile machinery and accessories -- Cylindrical tubes -- Part 5: Dimensions, tolerances and designation of tubes for continuous spin-drawn synthetic filament yarns
- ICS
- 59.120.20
- CCS
- 发布
- 2014-12-25
- 实施
This part of ISO 3914 specifies the main dimensions, tolerances and designation of cylindrical tubes for textured yarns. Furthermore, directives are given for the characteristics of tubes and for the control of the inner diameter and length of the tube.
Textile machinery and accessories -- Cylindrical tubes -- Part 4: Dimensions, tolerances and designation of tubes for textured yarns
- ICS
- 59.120.20
- CCS
- 发布
- 2014-12-25
- 实施
本标准规定了纺织机械高速绕线机的基本参数和主要特性、要求、试验方法、检验规则、标志、包装、运输和贮存。本标准适用于绣花线、缝纫线等成品线卷绕成筒的手动换管型和自动换管型高速绕线机。
Textile machinery.High-speed thread winding machines
- ICS
- 59.120.20
- CCS
- W93
- 发布
- 2014-07-09
- 实施
- 2014-11-01
This part of ISO 8116 specifies the main dimensions, mechanical strength, permissible tolerances of form and position of the main elements of warper's beams, and the driving devices and designation for warper's beams with and without shafts.
Textile machinery and accessories - Beams for winding - Part 2: Warper's beams
- ICS
- 59.120.20
- CCS
- 发布
- 2013-12-31
- 实施
This part of ISO 8116 defines the basic terms and designation and lays down the main dimensions as well as the variation of form and position for beams for ribbon weaving and ribbon knitting.
Textile machinery and accessories - Beams for winding - Part 6: Beams for ribbon weaving and ribbon knitting
- ICS
- 59.120.20
- CCS
- 发布
- 2013-12-31
- 实施
This part of ISO 8489 specifies the recommended types of cones (values of half angles, lengths and large inner diameters) used in the field of textile industry
Textile machinery and accessories -- Cones for cross winding -- Part 1: Recommended main dimensions
- ICS
- 59.120.20
- CCS
- 发布
- 2013-12-31
- 实施
This part of ISO 8116 specifies the test procedure for flanges for weaver’s beams, warper’s beams and sectional beams and the quality classes in this respect.
Textile machinery and accessories - Beams for winding - Part 4: Test methods and quality classification of flanges for weaver's beams, warper's beams and sectional beams
- ICS
- 59.120.20
- CCS
- 发布
- 2013-12-31
- 实施
This part of ISO 8489 specifies the main dimensions, tolerances and designation of cones for cross winding with a half angle of cone 4° 20'. Furthermore, directives are given for the characteristics of cones and for the control of the diameters and lengths of the cone.
Textile machinery and accessories -- Cones for cross winding -- Part 3: Dimensions, tolerances and designation of cones with half angle 4 degrees 20'
- ICS
- 59.120.20
- CCS
- 发布
- 2013-12-31
- 实施
This part of ISO 8489 specifies the main dimensions, tolerances and designation of cones for cross winding with a half angle of cone 5° 57'. Furthermore, directives are given for the characteristics of cones and for the control of the diameters and lengths of the cone.
Textile machinery and accessories -- Cones for cross winding -- Part 5: Dimensions, tolerances and designation of cones with half angle 5 degrees 57'
- ICS
- 59.120.20
- CCS
- 发布
- 2013-12-31
- 实施
This part of ISO 8116 specifies the main dimensions, mechanical strength and permissible tolerances of form and position for weaver’s beams that are used for weaving preparation as well as for weaving. The main dimensions of the profile threads for weaver’s beams and the specifications for connections for automation of beam changing are also given.
Textile machinery and accessories - Beams for winding - Part 3: Weaver's beams
- ICS
- 59.120.20
- CCS
- 发布
- 2013-12-31
- 实施
이 표준은 제직 준비뿐만 아니라 제직에 사용하는 경사 빔에 대한 주요 치수, 기계적 강도, 형상 및위치에 대한 허용 오차를 규정한다. 또한 경사 빔 프로파일 스레드의 주요 치수 및 빔의 자동 교체를 위한 연결 부분을 명시한다.
Textile machinery and accessories ― Beams for winding ― Part 2: Warper
- ICS
- 59.120.20
- CCS
- W91
- 发布
- 2013-12-31
- 实施
- 2013/12/31
This part of ISO 8116 defines variations of form and position, i.e. axial circular run-out tolerance of flanges and total barrel run-out tolerance of beams with and without shafts, and gives the methods of measuring such variations of form and position. The maximum tolerances together with the recommended limit for residual unbalance are specified in the parts of ISO 8116 for each type of beam.
Textile machinery and accessories - Beams for winding - Part 8: Definitions of run-out tolerances and methods of measurement
- ICS
- 59.120.20
- CCS
- 发布
- 2013-12-31
- 实施
이 표준은 제직 준비뿐만 아니라 제직에 사용하는 경사 빔에 대한 주요 치수, 기계적 강도, 형상 및위치에 대한 허용 오차를 규정한다. 또한 경사 빔 프로파일 스레드의 주요 치수 및 빔의 자동 교체를 위한 연결 부분을 명시한다.
Textile machinery and accessories ― Beams for winding ― Part 3: Weaver
- ICS
- 59.120.20
- CCS
- W91
- 发布
- 2013-12-31
- 实施
- 2013/12/31
This part of ISO 5238 specifies forms of winding suitable for winding yarns and similar products (for example, tape yarns, roving, sliver) onto tubes or other formers. It may be applied to spinning, twisting and winding machinery as well as to other machines fitted with winding devices. All forms of winding are a combination of the rotation of the package and the lateral movement of the yarn relative to the package. NOTE — In addition to terms given in the three official ISO languages (English, French and Russian), this part of ISO 5238 gives the equivalent terms in German; these have been Included at the request of Technical Committee ISO/TC 72, and are published under the responsibility of the Member Bodies for Germany, F.R. (DIN) and Switzerland (SNV) who have verified the correctness. However, only the terms given in the official languages can be considered as ISO terms.
Textile machinery and accessories -- Packages of yarns and intermediate products -- Part 2: Forms of winding
- ICS
- 59.120.20
- CCS
- 发布
- 2013-12-31
- 实施
This part of ISO 8116 specifies the main dimensions, mechanical strength, designation and permissible values of tolerances of form and position for the main elements of sectional beams for warp knitting machines. For cases where a limit must be fixed for the residual imbalance, a recommendation is made for the choice of quality grade.
Textile machinery and accessories - Beams for winding - Part 5: Sectional beams for warp knitting machines
- ICS
- 59.120.20
- CCS
- 发布
- 2013-12-31
- 实施
This part of ISO 8116 defines the basic terms and designation, and lays down the main dimensions as the driving devices for perforated beams used for dyeing slivers, rovings or yarns.
Textile machinery and accessories - Beams for winding - Part 7: Beams for dyeing slivers, rovings and yarns
- ICS
- 59.120.20
- CCS
- 发布
- 2013-12-31
- 实施
This part of ISO 8489 specifies the main dimensions, tolerances and designation of cones for cross winding for dyeing purposes with a half angle of cone 4° 20'. Furthermore, directives are given for the characteristics of cones and for the control of the diameters and lengths of the cone.
Textile machinery and accessories -- Cones for cross winding -- Part 4: Dimensions, tolerances and designation of cones with half angle 4 degrees 20' for winding for dyeing purposes
- ICS
- 59.120.20
- CCS
- 发布
- 2013-12-31
- 实施
Textile machinery and accessories ― Beams for winding ― Part 3: Weaver
- ICS
- 59.120.20
- CCS
- 发布
- 2013-12-31
- 实施
This part of ISO 8116specifies the terminology, principal dimensions and designation of dyeing beams for textile fabrics
Textile machinery and accessories - Beams for winding - Part 9: Dyeing beams for textile fabrics
- ICS
- 59.120.20
- CCS
- 发布
- 2013-12-31
- 实施
Textile machinery and accessories ─ Beams for winding ─ Part 2: Warper's beams
- ICS
- 59.120.20
- CCS
- 发布
- 2013-12-31
- 实施
