59.120.20 络纱机器和设备 标准查询与下载

FZ/T 96019-1997 HV472型系列卷绕机

本标准规定了HV472型系列卷绕机的规格及基本参数、技术要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于纺制1．56～3．33dtex涤纶未牵伸短纤维的HV472型系列卷绕机。

HV 472 type draw-off unit

FZ/T 97015-1997 分段整经机

本标准规定了分段整经机的型式、主要参数、技术要求、试验方法、检验规则及标志、包装、运输、贮存。 本标准适用于锦纶长丝、涤纶长丝、粘胶丝、棉纱、混纺纱等整绕于分段整经轴上的这类整经巩。

Sectional warping machine

FZ/T 94043-1996 络筒机

本标准规定了络筒机的结构参数、技术要求、试验方法、检验规则、标志、包装、运输及贮存。 本标准适用于棉型、毛型的纯纺及化学纤维的混纺纱，络制不同推度筒子和平行筒子，交叉卷绕的络筒机。 本标准限于国内使用，不适用于对外技术交流或对外贸易验收。 本标准不适用于自动络筒机。

winder

FZ/T 94044-1996 自动络筒机

本标准规定了自动络筒机的型式及基本参数、技术要求、试验方法、检验规则及标志、包装、运输、贮存。 本标准适用于将以天然纤维、化学纤维为原料的线密度为 667～4．2tex的纯、混纺单纱或股线络制成筒子的纱库型自动络筒机。

Automatic winder

DIN ISO 3914-4:1996 纺织机械和附件.圆柱形纱管.第4部分:变形纱线用纱管尺寸、公差和命名

Textile machinery and accessories - Cylindrical tubes - Part 4: Dimensions, tolerances and designation of tubes for textured yarns (ISO 3914-4:1994)

DIN ISO 3914-5:1996 纺织机械和附件.圆柱形纱管.第5部分:连续纺丝拉伸合成长丝纱管的尺寸、公差和命名

The document specifies the main dimensions and tolerances of cylindrical tubes for continuous spin-drawn synthetic filament yarns. This would include the spin-draw-texturizing process additionally. Furthermore, directives are given for the characteristics of tubes and for the control of the inner diameter and length of the tube.#,,#

Textile machinery and accessories - Cylindrical tubes - Part 5: Dimensions. tolerances and designation of tubes for continuous spin-drawn synthetic filament yarns (ISO 3914-5:1994)

DIN ISO 3914-3:1996 纺织机械和附件.圆筒形纱管.第3部分:扁丝纱管尺寸、公差和命名

The document specifies the main dimensions and tolerances of cylindrical tubes for tape yarns. Furthermore, directives are given for the characteristics of tubes and for the control of the inner diameter and length of the tube.#,,#

Textile machinery and accessories - Cylindrical tubes - Part 3: Dimensions, tolerances and designation of tubes for tape yarns (ISO 3914-3:1994)

DIN ISO 6176:1996 纺织机械.浆纱机.最大有效宽度

The document specifies the various maximum usable widths for entry and delivery sections of a warp sizing machine.

Textile machinery - Warp sizing machines - Maximum usable width (ISO 6176:1994)

ISO 8489-3:1995 纺织机械与附件.交叉卷绕用锥形管.第3部分:半锥角4°20′锥形管的尺寸、公差和命名

Specifies the main dimensions, tolerances and designation of cones for cross winding with a half angle of cone 4?20. Furthermore, directives are given for the characteristics of cones and for the control of the diameters and lengths of the cone.

Textile machinery and accessories - Cones for cross winding - Part 3: Dimensions, tolerances and designation of cones with half angle 4° 20

ISO 8489-5:1995 纺织机械与附件.交叉卷绕用锥形管.第5部分:半锥角5°57′锥形管的尺寸、公差和命名

Specifies the main dimensions, tolerances and designation of cones for cross winding with a half angle of cone 5?57. Furthermore, directives are given for the characteristics of cones and for the control of the diameters and lengths of the cone.

Textile machinery and accessories - Cones for cross winding - Part 5: Dimensions, tolerances and designation of cones with half angle 5° 57

ISO 8489-1:1995 纺织机械与附件 交叉卷绕用锥形管 第1部分:主要尺寸推荐值

Contains recommended types of cones (values of half angles, lengths and large inner diameters) used in the field of textile industry.

Textile machinery and accessories - Cones for cross winding - Part 1: Recommended main dimensions

ISO 8489-2:1995 纺织机械与附件.交叉卷绕用锥形管.第2部分:半锥角3°30′锥形管的尺寸、公差和命名

Specifies the main dimensions, tolerances and designation of cones for cross winding with a half angle of cone 3?30. Furthermore, directives are given for the characteristics of cones and for the control of the diameters and lengths of the cone.

Textile machinery and accessories - Cones for cross winding - Part 2: Dimensions, tolerances and designation of cones with half angle 3° 30

STAS SR ISO 6169:1995 纺织机械和辅助装置．并纱和捻纱的凸缘筒子

Prezentul Standard International stabile?te termenii care dese 〓cile esen?iale ale bobinelor cu flan?e pentru dublat ?i r?sucit ?i fixeaz? dimensiunile lor principale Dimensiunile principale ale bobinelor sunt acelea care depind de p?r?ile conexe aie ma?inii ?i de alte accesorii care ajut? la umplerea bobinei. NOTA - Suplimentar, la termenii indica?i tn cele trei limbi oficiale ale ISO (englez?, francez?, rus?), prezentul Standard International indic? termenii echivalen?i tn german? ?i italian?; ace?ti termeni au fost inclu?i la recomandarea Comitetului TehnIc ISO/TC 72 ?i sunt publica?i sub responsabilitatea comitetelor membre ale Germaniei (DIN) ?i ale Italiei (UNI). Numai termenii indica?i fn limbile oficiale pot fi considera?i ca termeni ISO.

Textile machinery and accesseries - Flanged bobbins for doubling and twisting

DIN ISO 5240:1995 纺织机械和附件.经纱粗纱架.主要尺寸 (ISO 5240:1994)

The document establishes terminology for warp creels and specifies their main dimension.

Textile machinery and accessories - Warp creels - Main dimensions (ISO 5240:1994)

ISO 8116-6:1995 纺织机械与附件 经轴 第6部分:织带机和钩编机用经轴

Defines the basic terms and designation and lays down the main dimensions as well as the variation of form and position for beams for ribbon weaving and ribbon knitting. Cancels and replaces the first edition, which has been technically revised.

Textile machinery and accessories - Beams for winding - Part 6: Beams for ribbon weaving and ribbon knitting

ISO 8116-8:1995 纺织机械与附件 经轴 第8部分:跳动公差的定义和测量方法

Defines variations of form and position of beams for winding and gives methods of measuring such variations of form and position. The variations are related to axial circular run-out tolerance of flanges and total barrel run-out tolerance of beams with and without shafts. This edition cancels and replaces ISO 2013, which has been technically revised.

Textile machinery and accessories - Beams for winding - Part 8: Definitions of run-out tolerances and methods of measurement

ISO 8116-7:1995 纺织机械与附件 经轴 第7部分:条子、粗纱和细纱染色用轴

Defines the basic terms and designation and lays down the main dimensions as well as the driving devices for perforated beams used for dyeing slivers, rovings or yarns. This edition cancels and replaces ISO 1037, which has been technically revised.

Textile machinery and accessories - Beams for winding - Part 7: Beams for dyeing slivers, rovings and yarns

ISO 8116-5:1995 纺织机械与附件 经轴 第5部分:经编机用分段整经轴

Defines the basic terms and designation for sectional beams for warp knitting machines and lays down the main dimensions as well as the maximum values of variation of form and position for the main elements of these beams. Cancels and replaces the first edition, which has been technically revised.

Textile machinery and accessories - Beams for winding - Part 5: Sectional beams for warp knitting machines

ISO 8116-3:1995 纺织机械与附件 经轴 第3部分:织轴

Defines the basic terms and lays down the main dimensions and the variations in form and position for weaver's beams that are used for weaving preparation as well as weaving. Furthermore the main dimensions of the threads for weaver's beams are given. Cancels and replaces the first edition, which has been technically revised.

Textile machinery and accessories - Beams for winding - Part 3: Weaver's beams

FZ/T 90084-1995 经编机用分段整经轴 术语及主要尺寸

本标准规定了经编机分段整经轴的基本术语、主要尺寸及这些整经轴主要部位形位公差的最大值。 为便于确定许用平衡量极限，本标准同时制定了供选用的平衡等级推荐值。

Terminology and main dimensions of segmented warp beams for warp knitting machines