59.140.40 皮革和毛皮加工机械和设备 标准查询与下载

QB/T 4930-2016 制革机械 覆膜机

本标准规定了覆膜机的产品分类、要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于工作宽度为1 500 mm~2 700 mm的覆膜机。

Leather machines.Film application machine

QB/T 4870-2015 皮革柔软度测试仪

本标准规定了皮革柔软度测试仪的术语和定义、型号、规格和基本参数、要求、试验方法、检验规则、标志、包装、运输和贮存。本标准适用于皮革加工工业中对皮革材料(如，鞋面革、家具装饰革、皮革制品、服装革等)进行非破坏性柔软度测试的专用仪器。

Leather softness tester

QB/T 2009-2015 制革机械 板式熨平压花机

Tannery mechanical plate ironing and embossing machine

QB/T 4786-2015 制革机械 抛光机

本标准规定了抛光机的型号、规格和基本参数、要求、试验方法、检验规则、标志、包装、运输、贮存。 本标准适用于对轻革粒面进行整饰的、工作宽度为600 mm~3 000 mm的抛光机。

Leather machines.Polisher

QB/T 2007-2015 制革机械 削匀机

本标准规定了削匀机的型号、规格和基本参数、要求、试验方法、检验规则、标志、包装、运输、贮存。 本标准适用于对蓝湿革、干革（成革）进行削匀工艺加工的、工作宽度为300 mm~3 200 mm的削匀机。

Leather machines.Shaving machine

QB/T 2014-2015 制革机械 去肉机

本标准规定了去肉机的分类、型号和基本参数、要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于工作宽度为1 500 mm~3 500 mm的去肉机。

Leather machines.Fleshing machine

QB/T 2008-2014 制革机械 滚筒熨平压花机

本标准规定了滚筒熨平压花机的产品分类、要求、试验方法、检验规则、标志、包装、运输、贮存。本标准适用于工作宽度为1 500 mm~3 200 mm的滚筒熨平压花机。

Leather machines.Cylinder ironing embossing machine

QB/T 2012-2014 制革机械 通过式磨革机

本标准规定了通过式磨革机的产品分类、要求、试验方法、检验规则、标志、包装、运输、贮存。本标准适用于工作宽度为1 200 mm~3 200 mm的通过式磨革机。

Leather machines.Through-feed buffing machine

QB/T 4536-2013 制鞋机械 中底包条机

本标准规定了中底包条机的产品分类、要求、试验方法、检验规则、标志、包装、运输和贮存。本标准适用于制鞋生产中的自动上胶中底包条机和人工上胶中底包条机。

Footwear machines.Insole folding machine

QB/T 4537-2013 制革机械 Y形不锈钢分格转鼓

本标准规定了Y形不锈钢全自动分格转鼓的产品分类、要求、试验方法、检验规则、标志、包装、运输与贮存。本标准适用于制革生产用Y形不锈钢全自动分格转鼓(以下简称“Y形转鼓”)。

Leather machines.Y shape stainless steel drum

QB/T 4472-2013 制革机械 不锈钢控温试验转鼓

本标准规定了不锈钢控温试验转鼓的产品分类、要求、试验方法、检验规则、标志、包装、运输与贮存。本标准适用于制革生产或试验用不锈钢控温试验转鼓。

Leather machines.Stainless steel temperature controlled test drum

QB/T 4470-2013 制革机械 窄幅剖层机

本标准规定了制革机械中的窄幅剖层机的产品型号及规格参数、要求、试验方法、检验规则、标志、包装、运输和贮存。本标准适用于工作宽度为800 mm~1 500 mm的制革生产用窄幅剖层机。

Leather machines.Narrow splitting machine

QB/T 4275-2011 制革机械.旋转式绷平干燥机

本标准规定了旋转式绷平干燥机的产品分类、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于制革行业中对皮革进行干燥的旋转式绷平干燥机。

Leather machines.Rotary toggling dryer machine

GSO EN 12044:2011 鞋类、皮革和人造皮革制品制造机器 切割和冲孔机 安全要求

1.1 This European Standard specifies safety requirements for the design and operation of the machines defined in 1.2. It takes account of intended use, foreseeable misuse and component and system failure. 1.2 This European Standard applies for cutting and punching machines used in the manufacture of footwear, leather and imitation leather goods and other related components. This European Standard applies to the following cutting and punching machines: - swing arm cutting presses with manual or powered swing arm; - manual and automatic travelling head cutting presses with powered travelling head; - manual and automatic beam cutting presses; - punching and perforating presses; - C-frame cutting presses. 1.3 This European Standard is not applicable to: - mechanical presses; - presses intended for working cold metal; - fastening, riveting, stitching, stapling, bending or folding machines; - guillotines, shears and similar machines; - shoe and leather presses as described in EN 12203. 1.4 This European Standard deals with all significant hazards, hazardous situations and events relevant to the footwear, leather and imitation leather goods manufacturing machinery defined in 1.2, when it is used as intended and under the conditions foreseen by the manufacturer (see Clause 4) and is intended for operation in applications by trained persons. 1.5 This European Standard deals with material feeding and handling devices, when attached to the machine. 1.6 This European Standard is not applicable to machines which are manufactured before the date of publication of this European Standard by CEN.

Footwear, leather and imitation leather goods manufacturing machines - Cutting and punching machines - Safety requirements

GSO EN 13457:2011 鞋类、皮革和仿皮制品制造机器 开槽、刮削、切割和粘合机器 安全要求

This document applies to splitting, skiving, edge trimming, strip cutting, cementing and cement drying machines used in the manufacture of footwear, leather and imitation leather goods and other related components. 1.2 This document does not apply to: - trimming machines with rotary milling tool for the purpose of trimming edges of material, see EN 930; - splitting and band knife machines used in tanneries, see EN 13112; - portable machines. 1.3 This document specifies safety requirements for construction, transport, installation, adjustment, setting, teaching or process change-over, operation, cleaning, maintenance, decommissioning, dismantling and, as far as safety is concerned, disposal for machines mentioned in 1.1. It takes account of intended use , foreseeable misuse, component and system failure. 1.4 This document deals with significant hazards relevant to the footwear, leather and imitation leather goods manufacturing industries. (For a list of hazards see Clause 4.) The document does not deal with precise technical measures for reducing the risks of fumes and dusts detrimental to health. The use of machines falling within the scope of this document for purposes other than those specified in 1.1, may give rise to hazards not considered during its preparation. 1.5 This document also applies to equipment for material handling and operations which are an integral part of the machine. 1.6 This document assumes the machines - are operated by adequately trained persons - are used with adequate workplace lighting conforming the local regulations or to EN 12464-1 1.7 This document is not applicable to splitting, skiving, edge trimming, strip cutting, cementing and cement drying machines which are manufactured before the date of its publication as EN.

Footwear, leather and imitation leather goods manufacturing machines - Splitting, skiving, cutting, cementing and cement drying machines - Safety requirements

GSO EN 1035:2011 晒黑机 移动滚筒机构 安全要求

This European Standard specifies safety requirements for all the phases of the life of a machine listed in 3.11.a of EN 292-1:1991. Moving platen machines are machines used for the processing of animal hides and skins. They are table type processing machines which are equipped with: - vertical opening and closing movement, - alternative horizontal feed-in and feed-out movement. This European standard covers the following machines (see figures 1 to 5 for typical configurations and normative annex C for descriptions): a) vacuum dryers with vertical movement (...); b) vacuum dryers with horizontal and vertical movement (...); c) vacuum stretching machines (...); d) platen ironing and embossing machines with vertical movement (...); e) platen ironing and embossing machines with horizontal and vertical movement (...). It takes account of intended use, foreseeable misuse, component and systems failure. This European Standard applies to the machines manufactured after its date of issue. All the significant hazards listed in clause 4 are covered by the requirements included in clause 5 except: - dust, fume, vapour and liquid emissions for which general guidelines are proposed in the informative annex B. Designers and manufacturers shall verify directly that the methods adopted to reduce these hazards have been successful.

Tannery machines - Moving platen machinery - Safety requirements

GSO EN 12203:2011 鞋、皮革和人造革制品制造机器 鞋和皮革压机 安全要求

This European Standard is applicable to shoe and leather presses (see 3.1) used in the manufacture of footwear, leather and imitation leather goods and other related components. These machines are: - Sole attaching presses (open and closed types); - Sole and insole moulding machines; - Back part moulding machines; - Backer, lining and toe puff attaching presses; - Ironing presses; - Marking, stamping, labelling and embossing machines; - Stitch marking machines; - Upper preforming machines; - Automatic shoe and leather presses; a) Premoulding machines for thermoplastic counters and counter forming machines; b) Integrated manufacturing systems; c) Presses with mobile stations and rotary configuration; - Folding presses; - Activating presses; - Relasting and last slipping machines; - Top piece attaching presses; - Leather button covering machines. 1.2 This European Standard is not applicable to: - Cutting and punching machines; NOTE !See EN 12044." - Eyelet, hook and decorative nail attaching machines; "deleted text" - Presses used for shoe repair and orthopaedic works NOTE "See EN 12387." 1.3 This European Standard specifies safety requirements for construction, transport, installation, adjustment, setting, teaching or process change-over, operation, cleaning, maintenance, decommissioning, dismantling and, as far as safety is concerned, disposal for machines mentioned in 1.1. It takes account of intended use, foreseeable misuse, component and system failure. 1.4 This European Standard covers significant hazards relevant to the footwear, leather and imitation leather goods manufacturing industries. (List of hazards see 4.) This European Standard does not deal with precise technical measures for reducing the risks of fumes and dusts detrimental to health. The use of machines within the scope of this European Standard in industries other than those specified in 1.1 can give rise to hazard not considered during its preparation.

Footwear, leather and imitation leather goods manufacturing machines - Shoe and leather presses - Safety requirements

DS/EN 972+A1/AC:2011 制革机 往复式滚筒机 安全要求

This European Standard specifies safety requirements for all the phases of the life of a machine listed in5.3 a) of EN ISO 12100-1:2003.Reciprocating roller machines are machines used for the processing of animal hides and skins. They have a reciprocating opening and closing motion of the feed rollers or conveyors which, if required, may also reverse their direction.This standard covers the following reciprocating roller machines (see figures 1 to 13 for typical configurations and annex D for descriptions):a) Buffing machines (see figures 1a and 1b)b) Polishing machines (see figures 1a and 1b)c) Ironing machines (woolskins and fur) (see figures 2a and 2b)d)

Tannery machines - Reciprocating roller machines - Safety requirements

DIN EN 972:2011 制革机械.往复式轧制机.安全性要求.德文版本EN 972-1998+A1-2010

The European Standard defines safety requirements for all the phases of the life of a machine listed in 5.3 a) of EN ISO 12100-1:2003. Reciprocating roller machines are machines used for the processing of animal hides and skins. They have a reciprocating opening and closing motion of the feed rollers or conveyers which, if required, may also reverse theire direction.

Tannery machines - Reciprocating roller machines - Safety requirements; German version EN 972:1998+A1:2010

LST EN 972-1998+A1-2011/AC-2011 制革机 往复式滚筒机 安全要求

Tannery machines - Reciprocating roller machines - Safety requirements