59.140.40 皮革和毛皮加工机械和设备 标准查询与下载

DS/EN 13114+A1:2010 制革机 旋转工艺容器 安全要求

1.1 This European Standard specifies safety requirements for design, construction, operation, adjustment, setting, cleaning and maintenance of a machine.1.2 This standard covers the following machines (see annex C and Figures 1 and 2 for typical configurations):a) horizontal rotating vessels;b) inclined rotating vessels.1.3 This standard does not apply to machines using substances containing solvent, that would generate fume and/or vapour detrimental to health, or that may lead to fire or explosive atmosphere.1.4 This standard takes account of intended use, foreseeable misuse, component and systems failure.The machines are for fixed installation.1.5 This do

Tannery machines - Rotating process vessels - Safety requirements

ASTM D5356-10(2015) 铬鞣溶液PH值的标准试验方法

5.1 This test method is designed to measure the pH of a chrome tanning solution which has been diluted to a specific concentration. This is considered to be a measure of the acidity or alkalinity of the solution. 5.2 This test method is suitable for quality control in the manufacture of leather. 1.1 This test method covers the determination of the pH of chrome tanning solutions. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for pH of Chrome Tanning Solutions

EN 13112:2002+A1:2009 制革设备.分割和带刀剪切机.安全要求

This European Standard specifies safety requirements for design, construction, operation, adjustment, setting, cleaning and maintenance of splitting machines (see figures 1, 2) for limed hides and skins, wet blue and dry materials, bandknife shearing machines (see figures 3, 4, 5, 6) used in the splitting and shearing of leather and synthetic materials. This standard takes account of intended use, foreseeable misuse, component and systems failure. The machines are for fixed installation. This document is not applicable to the splitting and bandknife shearing machines which are manufactured before the date of its publication as EN. All the significant hazards listed in clause 4 are safeguarded by the requirements included in clause 5 except dust and fire. For these hazards general guidelines are proposed in normative annex A. Designers and manufacturers shall verify directly that the methods adopted to reduce these hazards have been successful. This standard does not establish any requirements for electromagnetic disturbances. NOTE Directive 94/9/EC concerning equipment and protective systems intended for use in potentially explosive atmospheres can be applicable to the type of machine or equipment covered by this European Standard. The present standard does not necessarily comply with Directive 94/9/EC. Additional safety requirements in a future revision of this standard can be necessary to satisfy Directive 94/9/EC.

Tannery machines - Splitting and bandknife shearing machines - Safety requirements

EN 13114:2002+A1:2009 制革设备.旋转过程容器.安全要求

This European Standard specifies safety requirements for design, construction, operation, adjustment, setting, cleaning and maintenance of a machine. This standard covers the following machines (see annex C and Figures 1 and 2 for typical configurations): a) horizontal rotating vessels; b) inclined rotating vessels. This standard does not apply to machines using substances containing solvent, that would generate fume and/or vapour detrimental to health, or that may lead to fire or explosive atmosphere. This standard takes account of intended use, foreseeable misuse, component and systems failure. The machines are for fixed installation. This document is not applicable to the rotating vessels which are manufactured before the date of its publication as EN. This standard does not establish any requirements for electromagnetic disturbances. NOTE Directive 94/9/EC concerning equipment and protective systems intended for use in potentially explosive atmospheres can be applicable to the type of machine or equipment covered by this European Standard. The present standard does not necessarily comply with Directive 94/9/EC. Additional safety requirements in a future revision of this standard can be necessary to satisfy Directive 94/9/EC.

Tannery machines - Rotating process vessels - Safety requirements

KS M 6882-2006 皮革试验方法

이 규격은 의류용 가죽을 제외한 소가죽, 물소 가죽, 말가죽, 돼지 가죽, 염소 가죽 및

Testing method for leathers

NF G83-106/A1:2005 鞋靴、皮革和仿皮制品的生产机械.钉钉机.安全要求

Footwear, leather and imitation leather manufacturing machines - Nailing machines - Safety requirements.

LST EN 1035-2001/AC-2003 制革机 移动压板机械 安全要求

Tannery machines - Moving platen machinery - Safety requirements

DS/EN 1035/AC:2002 制革机 移动压板机械 安全要求

This European Standard specifies safety requirements for all the phases of the life of a machine listed in 3.11.a of EN 292-1:1991. Moving platen machines are machines used for the processing of animal hides and skins. They are table type processing machines which are equipped with vertical opening and closing movement and alternative horizontal feed-in and feed-out movement.

Tannery machines - Moving platen machinery - Safety requirements

BS EN 13114:2002+A1:2009 制革机.旋转加工容器.安全性要求

1.1 This European Standard specifies safety requirements for design, construction, operation, adjustment, setting, cleaning and maintenance of a machine. 1.2 This standard covers the following machines (see annex C and Figures 1 and 2 for typical configurations): a) horizontal rotating vessels; b) inclined rotating vessels. 1.3 This standard does not apply to machines using substances containing solvent, that would generate fume and/or vapour detrimental to health, or that may lead to fire or explosive atmosphere. 1.4 This standard takes account of intended use, foreseeable misuse, component and systems failure. The machines are for fixed installation. 1.5 This document is not applicable to the rotating vessels which are manufactured before the date of its publication as EN. 1.6 This standard does not establish any requirements for electromagnetic disturbances. NOTE Directive 94/9/EC concerning equipment and protective systems intended for use in potentially explosive atmospheres can be applicable to the type of machine or equipment covered by this European Standard. The present standard does not necessarily comply with Directive 94/9/EC. Additional safety requirements in a future revision of this standard can be necessary to satisfy Directive 94/9/EC.

Tannery machines - Rotating process vessels - Safety requirements

BS EN 13112:2002 制革机.剥离和带式刀剖皮剪切机的安全性要求

This European Standard specifies safety requirements for design, construction, operation, adjustment, setting, cleaning and maintenance of _ splitting machines (see figures 1, 2) for limed hides and skins, wet blue and dry materials, _ bandknife shearing machines (see figures 3, 4, 5, 6) used in the splitting and shearing of leather and synthetic materials. This standard takes account of intended use, foreseeable misuse, component and systems failure. The machines are for fixed installation. This European Standard applies to the machines manufactured after its date of issue. All the significant hazards listed in clause 4 are safeguarded by the requirements included in clause 5 except dust and fire. For these hazards general guidelines are proposed in normative annex A. Designers and manufacturers shall verify directly that the methods adopted to reduce these hazards have been successful. This standard does not establish any requirements for electromagnetic disturbances. NOTE Directive 94/9/EC concerning equipment and protective systems intended for use in potentially explosive atmospheres can be applicable to the type of machine or equipment covered by this European Standard. The present standard does not necessarily comply with Directive 94/9/EC. Additional safety requirements in a future revision of this standard can be necessary to satisfy Directive 94/9/EC.

Tannery machines - Splitting and bandknife shearing machines - Safety requirements

BS EN 13113:2002 制革机.滚动涂层机的安全性要求

This European Standard deals with the following roller coating machines (see Figures 2 to 4 and normative annex A for description): a) single and multi-roller contra-rotating machines (see Figure 2); b) single and multi-roller synchronised machines (see Figure 3); c) single and multi roller- contra-rotating /synchronised machines, so-called combined machines (see Figure 4). The machines are not intended to be used during transportation. This standard specifies safety requirements for design, construction and operation. It takes account of intended use, foreseeable misuse, component and systems failure. This standard takes account of material feeding and handling devices which, when attached to the machine, become an integral part. This European Standard applies to the machines manufactured after its date of issue. This standard does not establish any requirements for electromagnetic disturbances. NOTE Directive 94/9/EC concerning equipment and protective systems intended for use in potentially explosive atmospheres can be applicable to the type of machine or equipment covered by this European Standard. The present standard does not necessarily comply with Directive 94/9/EC. Additional safety requirements in a future revision of this standard can be necessary to satisfy Directive 94/9/EC.

Tannery machines - Roller coating machines - Safety requirements

BS EN 13113:2002+A1:2010 制革机.辊涂机.安全性要求

This European Standard deals with the following roller coating machines (see Figures 2 to 4 and normative annex A for description): a) single and multi-roller contra-rotating machines (see Figure 2); b) single and multi-roller synchronised machines (see Figure 3); c) single and multi roller- contra-rotating /synchronised machines, so-called combined machines (see Figure 4). The machines are not intended to be used during transportation. This standard specifies safety requirements for design, construction and operation. It takes account of intended use, foreseeable misuse, component and systems failure. This standard takes account of material feeding and handling devices which, when attached to the machine, become an integral part. !This document is not applicable to the roller coating machines which are manufactured before the date of its publication as EN." This standard does not establish any requirements for electromagnetic disturbances. NOTE Directive 94/9/EC concerning equipment and protective systems intended for use in potentially explosive atmospheres can be applicable to the type of machine or equipment covered by this European Standard. The present standard does not necessarily comply with Directive 94/9/EC. Additional safety requirements in a future revision of this standard can be necessary to satisfy Directive 94/9/EC.

Tannery machines - Roller coating machines - Safety requirements

BS EN 13114:2002 制革机.旋转加工容器.安全性要求

1.1 This European Standard specifies safety requirements for design, construction, operation, adjustment, setting, cleaning and maintenance of a machine. 1.2 This standard covers the following machines (see annex C and Figures 1 and 2 for typical configurations): a) horizontal rotating vessels; b) inclined rotating vessels. 1.3 This standard does not apply to machines using substances containing solvent, that would generate fume and/or vapour detrimental to health, or that may lead to fire or explosive atmosphere. 1.4 This standard takes account of intended use, foreseeable misuse, component and systems failure. The machines are for fixed installation. 1.5 This European Standard applies to the machines manufactured after its date of issue. 1.6 This standard does not establish any requirements for electromagnetic disturbances. NOTE Directive 94/9/EC concerning equipment and protective systems intended for use in potentially explosive atmospheres can be applicable to the type of machine or equipment covered by this European Standard. The present standard does not necessarily comply with Directive 94/9/EC. Additional safety requirements in a future revision of this standard can be necessary to satisfy Directive 94/9/EC.

Tannery machines - Rotating process vessels - Safety requirements

BS EN 13112:2002+A1:2009 制革机.剥离和带式刀剖皮剪切机.安全性要求

This European Standard specifies safety requirements for design, construction, operation, adjustment, setting, cleaning and maintenance of - splitting machines (see figures 1, 2) for limed hides and skins, wet blue and dry materials, - bandknife shearing machines (see figures 3, 4, 5, 6) used in the splitting and shearing of leather and synthetic materials. This standard takes account of intended use, foreseeable misuse, component and systems failure. The machines are for fixed installation. This document is not applicable to the splitting and bandknife shearing machines which are manufactured before the date of its publication as EN. All the significant hazards listed in clause 4 are safeguarded by the requirements included in clause 5 except dust and fire. For these hazards general guidelines are proposed in normative annex A. Designers and manufacturers shall verify directly that the methods adopted to reduce these hazards have been successful. This standard does not establish any requirements for electromagnetic disturbances. NOTE Directive 94/9/EC concerning equipment and protective systems intended for use in potentially explosive atmospheres can be applicable to the type of machine or equipment covered by this European Standard. The present standard does not necessarily comply with Directive 94/9/EC. Additional safety requirements in a future revision of this standard can be necessary to satisfy Directive 94/9/EC.

Tannery machines - Splitting and bandknife shearing machines - Safety requirements

EN 13112:2002 制革机.剥离和带式刀剖皮剪切机的安全要求;包含修改件A1-2009

This European Standard specifies safety requirements for design, construction, operation, adjustment, setting, cleaning and maintenance of splitting machines (see figures 1, 2) for limed hides and skins, wet blue and dry materials, bandknife shearing machines (see figures 3, 4, 5, 6) used in the splitting and shearing of leather and synthetic materials.This standard takes account of intended use, foreseeable misuse, component and systems failure. The machines are for fixed installation.This document is not applicable to the splitting and bandknife shearing machines which are manufactured before the date of its publication as EN. All the significant hazards listed in clause 4 are safeguarded by the requirements included in clause 5 except dust and fire. For these hazards general guidelines are proposed in normative annex A. Designers and manufacturers shall verify directly that the methods adopted to reduce these hazards have been successful.This standard does not establish any requirements for electromagnetic disturbances. NOTE Directive 94/9/EC concerning equipment and protective systems intended for use in potentially explosive atmospheres can be applicable to the type of machine or equipment covered byThis European Standard. The present standard does not necessarily comply with Directive 94/9/EC. Additional safety requirements in a future revision of this standard can be necessary to satisfy Directive 94/9/EC.

Tannery machines - Splitting and bandknife shearing machines - Safety requirements (Incorporates Amendment A1: 2009)

EN 13113:2002 制革机.滚动涂层机.安全要求

This European Standard deals with the following roller coating machines: a) single and multi-roller contra-rotating machines; b) single and multi-roller synchronised machines; c) single and multi roller-contra-rotating /synchronised machines, so-called combined machines. The machines are not intended to be used during transportation.This standard specifies safety requirements for design, construction and operation. It takes account of intended use, foreseeable misuse, component and systems failure.This standard takes account of material feeding and handling devices which, when attached to the machine, become an integral part.This document is not applicable to the roller coating machines which are manufactured before the date of its publication as EN.This standard does not establish any requirements for electromagnetic disturbances. NOTE Directive 94/9/EC concerning equipment and protective systems intended for use in potentially explosive atmospheres can be applicable to the type of machine or equipment covered byThis European Standard. The present standard does not necessarily comply with Directive 94/9/EC. Additional safety requirements in a future revision of this standard can be necessary to satisfy Directive 94/9/EC.

Tannery machines - Roller coating machines - Safety requirements (Incorporates Amendment A1: 2010)

EN 13114:2002 制革机.旋转加工容器的安全性要求.包含修改件A1-2009

This European Standard specifies safety requirements for design, construction, operation, adjustment, setting, cleaning and maintenance of a machine.This standard covers the following machines (see annex C and Figures 1 and 2 for typical configurations): a) horizontal rotating vessels; b) inclined rotating vessels.This standard does not apply to machines using substances containing solvent, that would generate fume and/or vapour detrimental to health, or that may lead to fire or explosive atmosphere.This standard takes account of intended use, foreseeable misuse, component and systems failure. The machines are for fixed installation.This document is not applicable to the rotating vessels which are manufactured before the date of its publication as EN.This standard does not establish any requirements for electromagnetic disturbances. NOTE Directive 94/9/EC concerning equipment and protective systems intended for use in potentially explosive atmospheres can be applicable to the type of machine or equipment covered byThis European Standard. The present standard does not necessarily comply with Directive 94/9/EC. Additional safety requirements in a future revision of this standard can be necessary to satisfy Directive 94/9/EC.

Tannery machines - Rotating process vessels - Safety requirements (Incorporates Amendment A1: 2009)

NP EN 1035-2000 皮革加工机，移动平整机．安全要求

A presente Norma Europeia especifica os requisitos de seguran?a, durante todas as fases da dura??o de uma máquina, constantes na lista 3.11 .a da EN 292-1:1991. As máquinas de pratos móveis constituem um tipo de máquinas usadas no processamento de couros e peles de animais. Tratam-se de máquinas de processamento do tipo mesa equipadas com: - movimento vertical de abertura e fecho, - movimento horizontal alternativo de alimenta??o e fornecimento para fora. A presente Norma Europeia aplica-se às seguintes máquinas (ver figuras 1 a 5 para configura??es típicas e o anexo C normativo para descri??es): a) secadores a vácuo com movimento vertical (ver figura 1); b) secadores a vácuo com movimento horizontal e vertical (ver figura 2); c) máquinas de estender a vácuo (ver figura 3); d) máquinas de engomar e gravar em relevo com movimento vertical (ver figura 4); e) máquinas de engomar e gravar em relevo com movimento horizontal e vertical (ver figura 5). Faz-se referência ao uso intencional, mau uso previsível e falha de componentes e sistemas. A presente Norma Europeia aplica-se a máquinas fabricadas após a sua data de publica??o. Todos os perigos significativos constantes na lista da sec??o 4 s?o cobertos pelas requisitos incluídas na sec??o 5 excepto: - poeiras, fumos, vapor e emiss?es líquidas para os quais s?o propostos procedimentos gerais no anexo informativo B. Os projectistas e os fabricantes devem verificar directamente se os métodos adoptados para reduzir estes perigos foram bem sucedidos.

Tannery machines Moving platen machinery Safety requirements

LST EN 1035-2001 制革机 移动压板机械 安全要求

Tannery machines - Moving platen machinery - Safety requirements

SNI 05-6309-2000 皮革挤水机运行的试验方法

Performance test method for sammying machines