65.060.40 植保设备 标准查询与下载

NY/T 2454-2019 机动植保机械报废技术条件

Technical conditions for scrapping of motorized plant protection machinery

KS B 7703-2019 喷雾器软管接头和软管接头

Hose couplings and hose joints for sprayers

KS B 7631-2019 灌木切割锯

Bush cutter saws

ISO 28139:2019 作物保护设备.背负式内燃机驱动的气动喷雾器.安全和环境要求和试验方法

This document specifies safety requirements and their verification, environmental requirements and related test methods, and minimum performance limits, for the design and construction of knapsack combustion engine-driven airblast sprayers as defined in 3.9. It describes methods for the elimination or reduction of hazards arising from their use. In addition, it specifies the type of information on safe working practices to be provided by the manufacturer. It addresses general operating parameters as well as the potential deposition of spray droplets under specified controlled conditions. This document deals with all significant hazards, hazardous situations and events, excepting those arising from vibration transmitted to the back of the operator. It is applicable to knapsack combustion engine-driven airblast sprayers when they are used as intended and under the conditions foreseeable by the manufacturer (see Table A.1). It is not applicable to: — hydraulic pressure sprayers; — thermal sprayers; — cold foggers; — sprayers adapted for the application of dry material. It is not applicable to knapsack combustion engine-driven airblast sprayers manufactured before the date of its publication. The requirements of this document applies to products manufactured 18 months after publication.

Equipment for crop protection — Knapsack combustion engine-driven airblast sprayers — Safety and environmental requirements and test methods

19/30338780 DC BS EN ISO 21191 作物保护设备 封闭式传输系统（CTS） 性能规格

BS EN ISO 21191. Equipment for crop protection. Closed transfer systems (CTS). Performance specification

DB37/T 3709-2019 风送式喷雾机

Air blown sprayer

T/ZZB 1334-2019 喷雾机用隔膜泵

本标准规定了喷雾机用隔膜泵的术语和定义、基本要求、技术要求、试验方法、检验规则及标志、包装、使用说明书、运输、贮存和质量承诺等。 本标准适用于流量不大于600L/min、工作压力不大于5.0MPa，额定转速350r/min～1000r/min的输送农药液体和其它液体介质的隔膜泵（以下简称泵）。

Diaphragm pump for sprayer

DB45/T 2024-2019 大鹏番茄根结线虫病综合防治技术规程

Dapeng tomato root-knot nematode comprehensive control technical regulations

ASTM E550-87(2019) 粒状农药地面喷洒器校准程序的制备标准指南

1.1 This guide is for those who prepare granular pesticide ground applicator calibration procedures. The purpose is to encourage methods that will improve uniformity and accuracy of application with granular applicators. 1.2 The values stated in SI units are to be regarded as standard. The values given in parentheses after SI units are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific hazard statements see Section 4. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Guide for Preparing Granular Pesticide Ground Applicator Calibration Procedures

ASTM E642-19 从空中应用设备测定应用率和分布模式的标准实施规程

1.1 This practice covers uniform procedures for determining and reporting application rates and distribution patterns from agricultural aircraft. This practice should not be used for making biological performance tests. 1.2 The procedures covered deal with both fixed and rotarywing aircraft equipped with either liquid or dry material distribution systems. 1.3 The values stated in SI units are to be regarded as standard. The values given in parentheses after SI units are provided for information only and are not considered standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Determining Application Rates and Distribution Patterns from Aerial Application Equipment

T/LZBQX 001-2019 背负式喷雾器

适用于农业、林业、园艺及卫生防疫，药液箱额定容积不小于3L的背负式喷雾器和背负式压缩喷雾器。

Knapsack sprayers

T/LZBQX 003-2019 背负式动力喷雾机

适用于农业、林业、园艺及卫生防疫等领域，由汽油机驱动液泵、采用液力喷雾方式的背负式喷雾机

Knapsack sprayer powered by gasoline engine

T/LZBQX 002-2019 背负式电动喷雾器

适用于植物保护和卫生防疫，以蓄电池为能源，且不超过42V安全特低电压的背负式电动喷雾器

Knapsack electric sprayers

T/CAMA 22-2019 喷杆式植保机器人

本标准规定了喷杆式植保机器人的术语和定义、型号与功能标准、试验方法、检验规则、标志、包装、运输与贮存。 本标准适用于以锂电池或直流发电机为动力，具备远程监控及操控系统、储药箱及快速加药装置、自动装卸及快速转场平台装置、远程速度闭环系统、可调节喷雾系统，通过操控系统实现行走、转向、平移、喷雾等功能的智能型喷杆式植保机器。

Spray rod plant protection robot

T/CAMA 02-2019 植保无人飞机 术语

本标准界定了植保无人飞机的术语及定义。 本标准适用于植保无人飞机。

Crop protection UAS — Terminology

T/CAMA 09-2019 植保无人飞机 驾驶员培训要求

本标准规定了植保无人飞机驾驶员培训、考核内容及方式。 本标准适用于植保无人飞机驾驶员培训与考核，用无人飞机进行喷药、授粉、撒播作业的驾驶员培训与考核可作参考。

Crop protection UAS —General rules for basic technology training of pilot

T/CAMA 10-2019 植保无人飞机 运营人要求

本标准规定了植保无人飞机运营人相关术语和定义、要求、植保无人飞机运营负责人管理职责、人力资源管理、植保无人飞机管理要求、植保药剂管理要求、植保服务要求。 本标准适用于植保无人飞机运营人规范自身运营。

Crop protection UAS — Operational requirements of organization

T/CAMA 04-2019 植保无人飞机 安全操作规程

本标准规定了植保无人飞机施药作业的基本条件、作业要求、操作规范，其他作业方式参照此标准执行。 本标准适用于植保无人飞机的操作。

Crop protection UAS — Code of safe operation

T/CAMA 07-2019 植保无人飞机 云系统接口数据规范

本标准规定了植保无人飞机与植保无人飞机云系统（也称为植保无人飞机云，简称植保机云）之间的接口数据方面的一般要求，以及植保无人飞机制造商提供的运营管理系统与植保机云之间的接口数据的一般要求，具体包括接口数据的内容、单位、精度类型、编码规则、长度、标识等。 本标准适用于植保无人飞机和植保机云的设计开发。

Crop protection UAS — Interface specifications of cloud system

T/CAMA 06-2019 植保无人飞机 作业质量

本标准规定了植保无人飞机及类似设备植保喷雾作业的质量要求、检测方法和检测规则。 本标准适用于植保无人飞机及类似设备植保喷雾作业作业的质量评定。

Crop protection UAS — Spraying quality