71.060.10 化学元素 标准查询与下载

DIN 51917:2002 碳素材料试验.洛氏硬度试验.布式硬度试验方法.固体材料

The document specifies a method about the Rockwell hardness test for carbon materials. A ball is used for this method.

Testing of carbonaceous materials - Rockwell hardness test - Ball indentation method; Solid materials

KS M ISO 3426:2002 工业用硫磺.在80℃时质量损失的测定

이 규격은 80°C에서 산업용 황의 질량 감소분 시험 방법에 대하여 규정한다.

Sulphur for industrial use ? Determination of loss in mass at 80°C

KS M ISO 3425:2002 工业用硫磺.在850.900℃时灰分的测定和在200℃时残渣的测定

이 규격은 산업용 황의 850∼900°C에서 회분 및 200°C에서 잔류물 분석 방법에

Sulphur for industrial use－Determination of ash at 850∼900°C and of residue at 200°C

KS M ISO 2069-2002(2012) 主要用于铝生产的氧化铝钙量的测定火焰原子吸收法

Aluminium oxide primarily used for the production of aluminium－Determination of calcium content－Flame atomic absorption method

AWWA B512-2002 二氧化硫

This standard describes sulfur dioxide, a compressed, nonflammable liquified gas, for use in the treatment of municipal and industrial water supplies to remove excess residual chlorine.

Sulfur Dioxide

ASTM D2414-02 炭黑的标准试验方法&8212；吸油数

1.1 This test method covers the determination of the oil absorption number of carbon black.1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Carbon Black—Oil Absorption Number

DIN 51942:2002 炭素材料试验.采用脉冲激励法测定动态弹性模量.固体材料

The document specifies a method for the determination of dynamic modulus of elasticity of carbonaceous materials (solid materials) by pulse exitation.

Testing of carbonaceous materials - Determination of dynamic modulus of elasticity by pulse excitation - Solid materials

JIS K 1102:2000 工业用液态氯.氯含量的测定

この規格は，液化塩素を気化させた後の気化ガス中の塩素含有量を，容量法によって測定する方法について規定する。

Liquid chlorine for industrial use -- Determination of the chlorine content

AWWA B510-2000 二氧化碳

Carbon dioxide is a colorless, odorless, and tasteless gas that forms a very weak acid known as carbonic acid when dissolved in water. The reaction of the carbon dioxide in the water to be treated forms bicarbonates with calcium carbonate or calcium hydro

Carbon Dioxide

ANSI/ASTM C561:2000 石墨样品中灰份测试方法

This test method provides a practical determination for the ash content in a graphite sample. This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Test Method for Ash in a Graphite Sample

ANSI/ASTM C1179:2000 人造碳与石墨材料在空气中的氧化质量损耗测定方法

This test method provides a comparative oxidation mass loss of manufactured carbon and graphite materials in air. This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. The values stated in SI units are to be regarded as the standard. The values in parentheses are for information purposes only.

Test Method for Oxidation Mass Loss of Manufactured Carbon and Graphite Materials in Air

ANSI/ASTM C695:2000 碳与石墨压强试验方法

This test method covers the determination of the compressive strength of carbon and graphite at room temperature. This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Test Method for Compressive Strength of Carbon and Graphite

ANSI/ASTM C625:2000 在石墨上进行放射试验结果报道的实施规程

This practice covers information recommended for inclusion in reports giving graphite irradiation results.

Practice for Reporting Irradiation Results on Graphite

ANSI/ASTM C562:2000 石墨样品中湿度试验方法

This test method provides a practical determination for the percentage of moisture in a graphite sample. This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Test Method for Moisture in a Graphite Sample

DIN 51919:1999 碳质材料试验.用电流电压法测定电极的电阻率.固体材料

The current voltage method is used for the determination of the electrical resistivity, measured in Ohm x ? of untreated carbon and graphite electrodes as well as treated carbon and graphite electrodes according to DIN 48601 at room temperature from 15 to 35 ?#,,#

Testing of carbonaceous materials - Determination of the electrical resistivity of electrodes according to the current-voltage method; solid materials

DIN 51918:1999 炭素材料的试验.用浮力法测定松散密度并用水浸渍法测定开口孔隙率.固体物质

The method is used for the determination of the bulk density by buoyancy method, measured in g/cm, and the open porosity by impregnate with water, measured as volume fraction in %, of carbon and graphite materials (solid materials).

Testing of carbonaceous materials - Determination of bulk density by buoyancy method and the open porosity by impregnation with water - Solid materials

ASTM C565-93(1998) 碳和石墨机械材料拉伸试验的标准试验方法

Standard Test Methods for Tension Testing of Carbon and Graphite Mechanical Materials

JIS K 1474 AMD 1:1999 活性炭的试验方法(修改件1)

Test methods for activated carbon (Amendment 1)

ASTM D2798-99 煤抛光试样中镜质体反射率的显微测定的标准试验方法

1.1 This test method covers the microscopical determination of both the mean maximum and mean random reflectances measured in oil of polished surfaces of vitrinite and other macerals present in coals ranging in rank from lignite to anthracite. This test method can be used to determine the reflectance of other macerals. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Microscopical Determination of the Reflectance of Vitrinite in a Polished Specimen of Coal

DIN 51944:1999 碳素材料的试验.四点法测定弯曲强度.固体材料

The document specifies a method for the determination of flexural strength of carbonaceous materials (solid matters) by four point method.

Testing of carbonaceous materials - Determination of flexural strength by four point method - Solid materials