71.100.10 铝生产用材料 标准查询与下载
共找到 1043 条与 铝生产用材料 相关的标准，共 70 页
This International Standard specifies a method to determine the dynamic modulus of elasticity of specimens made of solid carbonaceous or graphite materials at room temperature by the resonance method.
Carbonaceous materials for the production of primary aluminium -- Baked carbon bodies -- Determination of the dynamic elasticity modulus by the resonance method
- ICS
- 71.100.10
- CCS
- 发布
- 2016-12-22
- 实施
Carbonaceous materials for the production of aluminium. Cold and tepid ramming pastes. Preparation of baked test pieces and determination of loss on baking
- ICS
- 71.100.10
- CCS
- H32
- 发布
- 2016
- 实施
- 2017-07-01
Carbonaceous materials for the production of aluminium. Cold and tepid ramming pastes. Preparation of unbaked test pieces and determination of apparent density after compaction
- ICS
- 71.100.10
- CCS
- H32
- 发布
- 2016
- 实施
- 2017-07-01
Carbonaceous materials for the production of aluminium. Baked anodes. Determination of the air permeability
- ICS
- 71.100.10
- CCS
- H32
- 发布
- 2016
- 实施
- 2017-07-01
Carbonaceous materials for the production of aluminium. Calcined coke for electrodes. Determination of the electrical resistivity of granules
- ICS
- 71.100.10
- CCS
- H32
- 发布
- 2016
- 实施
- 2017-07-01
Carbonaceous materials for the production of aluminium. Cold and tepid ramming pastes. Expansion/shrinkage during baking
- ICS
- 71.100.10
- CCS
- H32
- 发布
- 2016
- 实施
- 2017-07-01
Carbonaceous materials used in the production of aluminium. Green coke and calcined coke for electrodes. Determination of bulk density (tapped)
- ICS
- 71.100.10
- CCS
- H32
- 发布
- 2016
- 实施
- 2017-07-01
Carbonaceous materials used in the production of aluminium. Determination of baking level expressed by equivalent temperature
- ICS
- 71.100.10
- CCS
- H32
- 发布
- 2016
- 实施
- 2017-07-01
Aluminium oxide primarily used for the production of aluminium. Determination of alpha alumina content. Method using X-ray diffraction net peak areas
- ICS
- 71.100.10
- CCS
- H12
- 发布
- 2015-12-31
- 实施
- 2015-12-31
Scope is not provided for this standard
Carbonaceous materials for the production of aluminium -- Prebaked anodes -- Determination of the fracture energy
- ICS
- 71.100.10
- CCS
- 发布
- 2015-12-21
- 实施
This International Standard sets out an X-ray diffraction method for the determination of the alpha alumina content of smelter grade alumina. The method is applicable to smelter grade alumina containing alpha phase at levels up to 50 %. The percentage by mass of alpha alumina is determined on an “as received” basis.
Aluminium oxide primarily used for the production of aluminium - Determination of alpha alumina content - Method using X-ray diffraction net peak areas
- ICS
- 71.100.10
- CCS
- D52
- 发布
- 2015-12
- 实施
Aluminium oxide primarily used for production of aluminium. Determination of trace elements. Wavelength dispersive X-ray fluorescence spectrometric method
- ICS
- 71.100.10
- CCS
- 发布
- 2015-11-30
- 实施
- 2015-11-30
This International Standard sets out a wavelength dispersive X-ray fluorescence spectrometric method for the analysis of aluminium oxide for trace amounts of any or all of the following elements: sodium, silicon, iron, calcium, titanium, phosphorus, vanadium, zinc, manganese, gallium, potassium, copper, chromium and nickel. These elements are expressed as the oxides Na 2 O, SiO 2 , Fe 2 O 3 , CaO, TiO 2 , P 2 O 5 , V2 O 5 , ZnO, MnO, Ga 2 O 3 , K 2 O, CuO, Cr2 O 3 , and NiO on an un-dried sample basis. The method is applicable to smelting-grade aluminium oxide. The concentration range covered for each of the components is given in Table 1 . Table 1 — Applicable concentration range Concentration range % Component Na 2 O 0,10 to 1 ,00 SiO 20,003 to 0,05 Fe 2 O 30,003 to 0,05 CaO 0,003 to 0,10 TiO 20,0005 to 0,010 P2 O50,0005 to 0,050 V2 O 50,0005 to 0,010 ZnO 0,0005 to 0,010 MnO 0,0005 to 0,010 Ga 2 O 30,0005 to 0,020 K2O 0,0005 to 0,010 CuO 0,0005 to 0,010 Cr2 O 30,0005 to 0,010 NiO 0,0005 to 0,010
Aluminium oxide primarily used for production of aluminium - Determination of trace elements - Wavelength dispersive X-ray fluorescence spectrometric method
- ICS
- 71.100.10
- CCS
- D52
- 发布
- 2015-11
- 实施
Aluminium oxide primarily used for the production of aluminium. Method for the determination of tapped and untapped density
- ICS
- 71.100.10
- CCS
- D52
- 发布
- 2015-08-31
- 实施
- 2015-08-31
This International Standard describes methods for the determination of tapped and untapped bulk density of smelter grade aluminium oxide primarily used for the production of aluminium. Methods using the fall of sample into a receptacle have been found to be sensitive to flow rate variations, which are caused by physical properties of the aluminium oxide. This International Standard minimizes flow rate variations.
Aluminium oxide primarily used for the production of aluminium - Method for the determination of tapped and untapped density
- ICS
- 71.100.10
- CCS
- 发布
- 2015-08
- 实施
本标准规定了铝电解用阴极炭块安全生产的基本安全要求和设备设施安全作业要求等。 本标准适用于铝电解用阴极炭块生产企业的设计、施工、安装、生产和设备检修、维护中的安全管理。
Safety specification for cathode carbon bricks for aluminium electrolysis
- ICS
- 71.100.10
- CCS
- Q52
- 发布
- 2015-07-14
- 实施
- 2016-01-01
本标准规定了铝用预焙阳极安全生产的基本要求。本标准适用于铝用预焙阳极生产企业设计、施工、验收、生产、维护、检修中的安全管理。
Safety codes of prebaked anode production for aluminium electrolysis
- ICS
- 71.100.10
- CCS
- Q52
- 发布
- 2015-07-14
- 实施
- 2016-01-01
Aluminium oxide primarily used for the production of aluminium. Method for the determination of flow time
- ICS
- 71.100.10
- CCS
- D52
- 发布
- 2015-06-30
- 实施
- 2015-06-30
This International Standard sets out a method for determining the amount of time taken for a given quantity of smelter-grade alumina to flow by gravity through a precisely constructed standard funnel. NOTE Variations in the apparatus and other test variables can create significant inter-laboratory differences in results. (See Table A.1.)
Aluminium oxide primarily used for the production of aluminium - Method for the determination of flow time
- ICS
- 71.100.10
- CCS
- 发布
- 2015-06
- 实施
Carbonaceous materials for the production of aluminium. Cathode block materials. Determination of the expansion due to sodium penetration without application of pressure
- ICS
- 71.100.10
- CCS
- H92
- 发布
- 2015-05-31
- 实施
- 2015-05-31
