73.100.10 巷道掘进和敷设管道设备 标准查询与下载
共找到 310 条与 巷道掘进和敷设管道设备 相关的标准，共 21 页
Mining equipment. Support of mine working. Polymer net for the guard mine working. Specifications
- ICS
- 73.100.10
- CCS
- 发布
- 2013
- 实施
- 2014-09-01
本标准规定了装药器的型式与基本参数、技术要求、试验方法及检验规则、标志、包装、运输和贮存。本标准适用于地下矿山开采、峒室、隧道和地面土石方等工程爆破作业中装填炸药的装药器。
Explosive loader
- ICS
- 73.100.10
- CCS
- D92
- 发布
- 2012-05-24
- 实施
- 2012-11-01
Polymer reinforcement materials for mining
- ICS
- 73.100.10
- CCS
- D 09
- 发布
- 2012-03-22
- 实施
- 2012-04-10
The mountain-mine equipment. Underground loading machines. General technical requirements and test methods
- ICS
- 73.100.10
- CCS
- 发布
- 2012
- 实施
- 2014-01-01
The mountain-mine equipment. Underground loading-transport machines. The safety requisitions and test methods
- ICS
- 73.100.10
- CCS
- 发布
- 2012
- 实施
- 2014-01-01
Anchor supports. General pecifications
- ICS
- 73.100.10
- CCS
- 发布
- 2012
- 实施
- 2014-01-01
本标准规定了手持式内燃凿岩机的型式与基本参数、技术要求、检验方法、检验规则及标志、包装、运输和贮存。 本标准适用于手持式内燃凿岩机（以下简称产品）。
Hand-held internal combustion rock drills
- ICS
- 73.100.10
- CCS
- J84
- 发布
- 2011-12-20
- 实施
- 2012-04-01
This document specifies the safety requirements for hydraulic control devices, including hydraulic valves and their control elements, valve combi¬nations, control systems, pipes and hose assemblies, fittings, shut-off devices, measuring devices, filters, built-in pressure limiting and check valves in legs and rams and water spraying and dust suppression valves when used as specified by the manufacturer or his authorized representative. Excluded are electronic control devices, pressure generators, and internal valves of legs and rams (e.g. constant yield valves, see EN1804-2). Some components are dealt with in other parts of this standard. NOTE prEN1804-4 also applies to electro-hydraulic control devices. Part 4 also contains requirements for electrical control elements of valves. This document applies to hydraulic control devices at ambient temperatures from –10 °C to 60 °C. This document identifies and takes into account: - possible hazards which may be caused by the operation of hydraulic control devices; - areas and operating conditions which may create such hazards; - hazardous situations which may cause injury or may be damaging to health; - hazards which may be caused by firedamp and/or combustible dusts. This document describes methods for the reduction of these hazards. A list of significant hazards covered appears in clause 4. This document is applicable to all hydraulic control devices placed on the market for the first time after the date of issue of this standard. This document does not specify any additional requirements for: - use in particularly corrosive environments; - hazards occurring during construction, transportation, decommissioning; - earthquakes.
Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 3: Hydraulic control systems
- ICS
- 73.100.10
- CCS
- 发布
- 2011-10-12
- 实施
本标准规定了煤矿加固煤岩体用高分子材料（以下简称高分子加固材料）的术语和定义、产品分类、要求、试验方法、检验规则、标志、包装、运输及贮存。 本标准适用于煤矿加固煤岩体用高分子材料。
Polymer material for consolidating coal and rock in mine
- ICS
- 73.100.10
- CCS
- D09
- 发布
- 2011-07-12
- 实施
- 2011-12-01
本标准规定了煤矿堵水用高分子材料（以下简称高分子堵水材料）的术语和定义、要求、试验方法、检验规则、标志、包装、运输及贮存。 本标准适用于煤矿注浆封堵煤岩体出水用高分子材料。
Technical specification of coal mine water shutoff polymer
- ICS
- 73.100.10
- CCS
- D09
- 发布
- 2011-07-12
- 实施
- 2011-12-01
Polymer materials for strengthening coal and rock mass in coal mines
- ICS
- 73.100.10
- CCS
- D09
- 发布
- 2011-07-12
- 实施
- 2011-12-01
本标准规定了支腿式液压凿岩机的型式与基本参数、技术要求、检验方法、检验规则和标志、包装、运输与贮存。 本标准适用于支腿式液压凿岩机（以下简称为产品）的设计、制造、检验和使用。
Leg support hydraulic rock drills
- ICS
- 73.100.10
- CCS
- J84
- 发布
- 2011-05-18
- 实施
- 2011-08-01
本标准规定了履带式露天钻车（以下简称钻车或产品）的型式与基本参数、技术要求、检验方法、检验规则和标志、包装、运输与贮存。 本标准适用于气动履带式露天钻车的设计、制造、使用和检验。
Open-pit crawler rig
- ICS
- 73.100.10
- CCS
- J84
- 发布
- 2011-05-18
- 实施
- 2011-08-01
本标准规定了凿岩机械与气动工具热处理件的技术要求、检验规则和检验方法、标志和证明书。 本标准适用于凿岩机械与气动工具热处理零件（不包括有色金属及粉末冶金热处理零件）。 在产品图样或技术文件无特殊要求时，应按本标准执行。
General specification of heat-treatment for rock drilling machines and pneumatic tools
- ICS
- 73.100.10
- CCS
- J84
- 发布
- 2011-05-18
- 实施
- 2011-08-01
Resin anchors Part 2: Metal rod bodies and accessories
- ICS
- 73.100.10
- CCS
- D97
- 发布
- 2011-04-12
- 实施
- 2011-09-01
MT 146的本部分规定了树脂锚杆锚固剂的产品分类、技术要求、试验方法、检验规则、标志、包装、运输、贮存。 本部分适用于矿山井巷支护用的锚固剂。 井筒装备的安装、基础锚固等工程所需的锚固剂也可参照执行。
Resin anchor bolts.Part 1:Capsules
- ICS
- 73.100.10
- CCS
- D97
- 发布
- 2011-04-12
- 实施
- 2011-09-01
MT 146的本部分规定了树脂锚杆金属杆体及其附件的产品分类、技术要求、试验方法、检验规则、标志、包装、运输、贮存。 本部分适用于矿山井巷支护用的树脂锚杆金属杆体及其附件。
Resin anchor bolts.Part 2:Steel bars and accessories
- ICS
- 73.100.10
- CCS
- D97
- 发布
- 2011-04-12
- 实施
- 2011-09-01
本标准规定了悬臂式掘进机用拨盘的产品分类、要求、试验方法、检验规则、标志、包装、运输、贮存。 本标准适用于悬臂式掘进机用拨盘。
Boom-type roadheader.Loader star
- ICS
- 73.100.10
- CCS
- D92
- 发布
- 2011-04-12
- 实施
- 2011-09-01
本标准规定了悬臂式掘进机切割机构减速器的范围、规范性引用文件、要求、试验方法、检验规则、标志、包装、运输、贮存。 本标准适用于含有瓦斯、煤尘或其他爆炸性混合气体中作业的悬臂式掘进机切割机构减速器，也适用于其他工程巷道中作业的该类型掘进机的切割机构减速器。
Boom-type roadheader.Reducing device of cutting mechanism
- ICS
- 73.100.10
- CCS
- D92
- 发布
- 2011-04-12
- 实施
- 2011-09-01
本标准规定了悬臂式掘进机配套用带式转载机的术语和定义产品分类、要求、试验方法、检验规则、标志、包装、运输、贮存。 本标准适用于煤矿煤巷及半煤岩巷掘进作业用的转载机。
Belt conveyor for boom-type roadheader
- ICS
- 73.100.10
- CCS
- D92
- 发布
- 2011-04-12
- 实施
- 2011-09-01
