73.100.10 巷道掘进和敷设管道设备 标准查询与下载
共找到 310 条与 巷道掘进和敷设管道设备 相关的标准，共 21 页
本标准规定了悬臂式掘进机配套用带式转载机的术语和定义产品分类、要求、试验方法、检验规则、标志、包装、运输、贮存。 本标准适用于煤矿煤巷及半煤岩巷掘进作业用的转载机。
Belt conveyor for boom-type roadheader
- ICS
- 73.100.10
- CCS
- D92
- 发布
- 2011-04-12
- 实施
- 2011-09-01
MT 146的本部分规定了树脂锚杆锚固剂的产品分类、技术要求、试验方法、检验规则、标志、包装、运输、贮存。 本部分适用于矿山井巷支护用的锚固剂。 井筒装备的安装、基础锚固等工程所需的锚固剂也可参照执行。
Resin anchor bolts.Part 1:Capsules
- ICS
- 73.100.10
- CCS
- D97
- 发布
- 2011-04-12
- 实施
- 2011-09-01
Anchor supports. Test methods for anchor
- ICS
- 73.100.10
- CCS
- 发布
- 2011
- 实施
- 2013-01-01
Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 3: Hydraulic control systems
- ICS
- 73.100.10
- CCS
- 发布
- 2010-05-31
- 实施
- 2010-05-31
Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 2: Power set legs and rams
- ICS
- 73.100.10
- CCS
- 发布
- 2010-05-31
- 实施
- 2010-05-31
Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 1: Support units and general requirements
- ICS
- 73.100.10
- CCS
- 发布
- 2010-05-31
- 实施
- 2010-05-31
Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 2 : power set legs and rams.
- ICS
- 73.100.10
- CCS
- D92
- 发布
- 2010-05-01
- 实施
Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 2 : power set legs and rams.
- ICS
- 73.100.10
- CCS
- D92
- 发布
- 2010-05-01
- 实施
- 2010-05-07
Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 1: Support units and general requirements; German version EN 1804-1:2001+A1:2010
- ICS
- 73.100.10
- CCS
- D91
- 发布
- 2010-05
- 实施
- 2010-05-01
This European standard specifies the safety requirements when used as specified by the manufacturer or his authorised representative for hydraulic control devices including hydraulic valves and their control elements, valve combinations, control systems, pipes and hose assemblies, fittings, shut-off devices, measuring devices, filters, in legs and rams built-in pressure limiting and check valves, water spraying and dust suppression valves. Excluded are electronic control devices, pressure generators, and internal valves of legs and rams (e. g. constant yield valves see 1804-2).
Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 3: Hydraulic control systems; German version EN 1804-3:2006+A1:2010
- ICS
- 73.100.10
- CCS
- D91
- 发布
- 2010-05
- 实施
- 2010-05-01
The document specifies the safety requirements for legs, support rams and rams including their mechanical extensions, internal valves and safety devices, seals, hydraulic connections (up to the first hose or Type B valve) and their lifting points but excluding protective pipes and gaiters, external valves and hydraulic and electrohydraulic control units.
Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 2: Power set legs and rams; German version EN 1804-2:2001+A1:2010
- ICS
- 73.100.10
- CCS
- D91
- 发布
- 2010-05
- 实施
- 2010-05-01
This standard specifies the safety requirements for legs and rams when used as specified by the manufacturer or his authorised representative. Examples covered by the standard include legs, support rams and rams with their mechanical extensions, internal valves and safety devices, seals, hydraulic connections (up to the first hose or Type B valve, see Part 3) and their lifting points but excluding protective pipes and gaiters, external valves and hydraulic and electrohydraulic control systems.NOTE Some components are dealt with in other parts of this standard.This standard applies to legs, support rams and rams used at ambient temperatures from -10 °C to 60
Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 2: Power set legs and rams
- ICS
- 73.100.10
- CCS
- 发布
- 2010-04-16
- 实施
- 2010-04-16
This standard specifies the safety requirements for support units when used as specified by the manufacturer or his authorised representative. Examples of support units are frame supports, chock supports, shield supports, paired frames and push-pull support systems including the components of advancing and anchoring devices which provide support functions. This part of the standard excludes fixing elements on the conveyor, coal-winning equipment, power set legs and rams, valves, hydraulic and electro-hydraulic control units, lighting and signalling facilities and other ancillary equipment.NOTE Some components are dealt with in other parts of this standard.T
Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 1: Support units and general requirements
- ICS
- 73.100.10
- CCS
- 发布
- 2010-04-16
- 实施
- 2010-04-16
This document specifies the safety requirements for hydraulic control devices, including hydraulic valves and their control elements, valve combi¬nations, control systems, pipes and hose assemblies, fittings, shut-off devices, measuring devices, filters, built-in pressure limiting and check valves in legs and rams and water spraying and dust suppression valves when used as specified by the manufacturer or his authorized representative. Excluded are electronic control devices, pressure generators, and internal valves of legs and rams (e.g. constant yield valves, see EN1804-2).Some components are dealt with in other parts of this standard.NOTE prEN1804-4 als
Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 3: Hydraulic control systems
- ICS
- 73.100.10
- CCS
- 发布
- 2010-04-16
- 实施
- 2010-04-16
Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 1 : support units and general requirements.
- ICS
- 73.100.10
- CCS
- D92
- 发布
- 2010-03-01
- 实施
- 2010-03-24
Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 3 : hydraulic control systems.
- ICS
- 73.100.10
- CCS
- D92
- 发布
- 2010-03-01
- 实施
- 2010-03-24
Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 3 : hydraulic control systems.
- ICS
- 73.100.10
- CCS
- D92
- 发布
- 2010-03-01
- 实施
Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 1 : support units and general requirements.
- ICS
- 73.100.10
- CCS
- D92
- 发布
- 2010-03-01
- 实施
本标准规定了气腿的型式与基本参数、技术要求、试验方法和检验规则及标志、包装、运输和贮存。 本标准适用于气动凿岩机用气腿(以下简称产品)。
Air legs
- ICS
- 73.100.10
- CCS
- J84
- 发布
- 2010-02-11
- 实施
- 2010-07-01
本标准规定了导轨式凿岩机的型式与基本参数、技术要求、检验方法、检验规则、标志、包装、运输和贮存。 本标准适用于以压缩空气为动力的导轨式凿岩机(以下简称产品)。
Drifters
- ICS
- 73.100.10
- CCS
- J84
- 发布
- 2010-02-11
- 实施
- 2010-07-01
