73.100.40 牵引和起重设备 标准查询与下载

DB51/ 1176-2010 金属非金属地下矿山在用主排水系统安全检测检验规范

Specification for safety inspection and inspection of main drainage system in use in metal and nonmetal underground mines

DB51/ 1179-2010 金属非金属地下矿山在用主通风机系统安全检测检验规范

Specifications for safety inspection and inspection of main ventilator system in use in metal and nonmetal underground mines

DB51/ 1178-2010 水电水利工程施工卷扬机提升系统安全检测检验规范

Specifications for safety inspection and inspection of winch hoisting system in construction of hydropower and water conservancy projects

DIN 22100-6:2010 地下矿井用合成器材和材料.第6部分:薄板,涂层/非涂层织物.隔板材料和绝缘层材料垫板.安全性要求,检验和标志

Articles and materials from synthetic for use in underground mines - Part 6: Sheeting, coated/uncoated tissue, brattice materials and lagging mats - Safety requirements, testing, marking

DIN 22100-5:2010 地下矿井用合成器材和材料.第5部分:管,管隔离件和软管.安全性要求,检验,标识

Articles and materials from synthetic for use in underground mines - Part 5: Tubes, tube isolations and hoses - Safety requirements, testing, marking

AQ 2029-2010 金属非金属地下矿山主排水系统安全检验规范

本规范规定了金属非金属地下矿山在用排水泵及主排水系统安全性能检验的项目、技术要求、检验方法、判断规则和检验周期。 本规范适用于金属非金属地下矿山在用排水泵和主排水系统的现场安全检验,也可作为安全生产监管部门安全监督管理的依据。

Safety testing specification of in-service main dewatering system for metal and nonmetal underground mines

AQ 2028-2010 矿山在用斜井人车安全性能检验规范

本规范规定了矿山在用斜井人车安全性能检验的项目、技术要求、检验方法、判定规则和检验周期。 本规范适用于矿山在用抱轨式和插爪式斜井人车现场安全性能检验、安全生产监督管理部门的监督管理和企业对斜井人车维护、保养后的检验。

Safety testing specification of in-service slope manriding car for mines

AQ 2027-2010 金属非金属露天矿山在用矿用自卸汽车安全检验规范

本标准规定了金属非金属露天矿山在用矿用自卸汽车安全检验的项目、技术要求、检验方法、判定规则和检验周期。 本标准适用于金属非金属露天矿山在用矿用自卸汽车现场检验。

Safety testing specification of in-service mining dump trucks for metal and nonmetal opencast mines

AQ 2026-2010 金属非金属矿山提升钢丝绳检验规范

本规范规定了金属非金属矿山提升系统中提升和平衡用钢丝绳验收检验、悬挂前检验和在用钢丝绳定期检验的技术要求、检验方法、判定规则和检验周期。 本规范适用于金属非金属矿山提升用途的圆股钢丝绳、异型股钢丝绳、面接触钢丝绳及平衡用扁钢丝绳。 本规范不适用于密封钢丝绳、起重设备吊装用钢丝绳及架空索道用钢丝绳。

Safety testing specification of hoisting rope for metal and nonmetal mines

DS/EN 14658+A1:2010 连续搬运设备和系统 露天褐煤采矿连续搬运设备的一般安全要求

This European Standard applies to mechanical continuous handling equipment used in opencast lignite mines and the particular mechanical continuous handling equipment used:- to convey lignite or overburden from opencast mines;- to convey residuals and tailings from lignite processing to opencast mines;- to convey lignite, overburden or lignite treatment processing residuals and tailings from one opencast mine to another. This standard applies to continuous handling equipment operating in delimited site areas that are off-limits to the public and accessible only to authorized persons.It specifies the safety requirements for stationary, mobile and shiftable co

Continuous handling equipment and systems - General safety requirements for continuous handling equipment for opencast lignite mining

DIN 21181-2:2010 凿井.碎石吊桶.第2部分:带有两条悬挂链的碎石吊桶

During sinking down a shaft debris kibbles with suspensions hager and chain set are used for the transport of material and also for the conveyance of persons.

Shaft sinking - Debris kibbles - Part 2: Debris kibbles with suspension two-strand chain set

DIN 21181-1:2010 凿井.碎石吊桶.第1部分:带有悬挂吊架的碎石吊桶

During sinking down a shaft debris kibbles are used for the transport of material and also for the conveyance of persons.

Shaft sinking - Debris kibbles - Part 1: Debris kibbles with suspension hanger

JB/T 10995-2010 矿井提升机天轮和导向轮用衬块

本标准规定了矿井提升机天轮和导向轮用衬块的型号、规格、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于矿井提升机天轮和导向轮用衬块。天轮、导向轮衬垫主要应用于煤炭、冶金等矿山用单绳绕式提升机天轮、多绳磨擦式提升机导向轮，及类似的、利用天轮、导向轮改变钢丝绳方向的提升设备上。

Lining block for sheave wheel of mine hoist

JB/T 10994-2010 缠绕式矿井提升设备用塑料衬板

本标准规定了缠绕式矿井提升设备用塑料衬板的型号和规格、技术要求、实验方法、检验规则、出厂附带文件。 本标准适用于缠绕式矿井提升设备用塑料衬板，塑料衬板主要应用于煤炭、冶金等矿山用单绳缠绕式矿井提升机主轴装置卷筒，提升绞车主轴装置卷筒，以及类似的、利用卷筒装置缠绕钢丝绳的机械上。

Lining for entwine hoist

JB/T 7889-2010 JTK型矿用提升绞车

本标准规定了JTK型矿用提升绞车的型式与基本参数、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于JTK型矿用提升绞车,主要用于煤矿、金属矿、非金属矿的倾斜巷道和小型竖井来升降物料等。

JTK Type mine winder

JB/T 7888-2010 JTP型矿用提升绞车

本标准规定了JTP型矿用提升绞车的型式与基本参数、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于煤矿、金属矿、非金属矿的倾斜巷道和小型竖井来升降物料和人员的绞车。

JTP Type mine winder

JB/T 4264-2010 启闭风门绞车

本标准规定了启闭风门绞车的型式与基本参数、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于煤矿或其它矿山通风机风流换向时启闭风门和闸门的绞车。

Changing ventilation winch

LST EN 12321-2003+A1-2009 地下采矿机械 铠装工作面输送机安全要求规范

Underground mining machinery - Specification for the safety requirements of armoured face conveyors

LST EN 1889-2-2004+A1-2009 地下矿山机器 地下工作的移动机器 安全 第2部分：铁路机车

Machines for underground mines - Mobile machines working underground - Safety - Part 2: Rail locomotives

DIN EN 1889-2:2009 地下采矿机械.移动式机械地下作.安全性.第2部分:轨道机车(含修改件A1:2009),英文版本DIN EN 1889-2:2009-07

This European standard specifies the safety requirements and tests for rail locomotives for use in underground mining (i.e. mine locomotives) and other underground workings (e.g. tunnelling locomotives). 1.1 This European standard deals with the technical requirements to minimise the hazards listed in clause 4 which can arise during the commissioning, the operation and the maintenance of locomotives when carried out in accordance with the specifications given by the manufacturer or his authorised representative. 1.2 This European standard does not address the special hazards associated with the rack drive of rack and pinion locomotives. 1.3 This European standard does not deal with radiation and vibration. It does not address remote control locomotives or operation in potentially explosive atmospheres. Hazards due to noise are excluded from this standard, but a separate standard is in preparation where hazards due to noise will be addressed. 1.4 This European standard applies to locomotives which are manufactured after the date of issue of this standard.

Machines for underground mines - Mobile machines working underground - Safety - Part 2: Rail locomotives (includes Amendment A1:2009); English version of DIN EN 1889-2:2009-07