75.180.01 石油和天然气工业设备综合 标准查询与下载

KS B ISO 15156-1-2015(2020) 石油和天然气工业 - 材料在石油和天然气生产环境中含硫化氢使用 - 第1部分:总则开裂 耐磨材料的选择

Petroleum and natural gas industries－Materials for use in H2S-containing environments in oil and gas production－Part 1：General principles for selection of cracking-resistant materials

BS EN ISO 15156-1:2015 石油和天然气工业.油、气生产中含硫化氢(H2S)环境下使用的材料.耐裂化材料选择的一般原则

Petroleum and natural gas industries. Materials for use in H2S-containing environments in oil and gas production. General principles for selection of cracking-resistant materials

ISO 15156-2:2015 石油和天然气工业.油、气生产中含硫化氢(H2S)环境下使用的材料.第2部分:耐裂化碳和低合金钢及铸铁的使用

This part of ISO 15156 gives requirements and recommendations for the selection and qualification of carbon and low-alloy steels for service in equipment used in oil and natural gas production and natural gas treatment plants in H2S-containing environments, whose failure can pose a risk to the health and safety of the public and personnel or to the environment. It can be applied to help to avoid costly corrosion damage to the equipment itself. It supplements, but does not replace, the materials requirements of the appropriate design codes, standards or regulations. This part of ISO 15156 addresses the resistance of these steels to damage that can be caused by sulfide stress-cracking (SSC) and the related phenomena of stress-oriented hydrogen-induced cracking ISOHIC) and soft-zone cracking (SZC). This part of ISO 15156 also addresses the resistance of these steels to hydrogen-induced cracking (HIC) and its possible development into stepwise cracking (SWC). This part of ISO 15156 is concerned only with cracking. Loss of material by general (mass loss) or localized corrosion is not addressed. Table 1 provides a non-exhaustive list of equipment to which this part of ISO 15156 is applicable, including permitted exclusions. This part of ISO 15156 applies to the qualification and selection of materials for equipment designed and constructed using load controlled design methods. For design utilizing strain-based design methods, Annex A lists SSC-resistant carbon and low alloy steels, and A.2.4 includes requirements for the use of cast irons. This part of ISO 15156 is not necessarily suitable for application to equipment used in refining or downstream processes and equipment.  Table 1 — List of equipment for the following equipment Permitted exclusions Drilling, well construction and well-servicing equipment Equipment exposed only to drilling fluids of controlled compositiona Drill bits Blowout preventer (BOP) shear bladesb Drilling riser systems Work strings Wireline and wireline equipmentc Surface and intermediate casing Wells, including subsurface equipment, gas lift equipment, wellheads and christmas trees Sucker rod pumps and sucker rodsd Electric submersible pumps Other artificial lift equipment Slips Flow-lines, gathering lines, field facilities and field processing plants Crude oil storage and handling facilities operating at a total absolute pressure below 0,45 MPa (65 psi) Water-handling equipment Water-handling facilities operating at a total absolute pressure below 0,45 MPa (65 psi) Water injection and water disposal equipment Natural gas treatment plants — Transportation pipelines for liquids, gases and multiphase fluids Lines handling gas prepared for general commercial and domestic use For all equipment above Components loaded only in compression a See A.2.3.2.3 for more information. b See A.2.3.2.1 for more information. c Wireline lubricators and lubricator connecting devices are not permitted exclusions. d For sucker rod pumps and sucker rods, reference can be made to NACE MR0176.

Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production- Part 2:Cracking-resistant carbon and low-alloy steels, and the use of cast irons

BS EN ISO 16903:2015 石油和天然气工业. 液化天然气影响设计和材料选择的特性

Petroleum and natural gas industries. Characteristics of LNG, influencing the design, and material selection

ISO 16903:2015 石油和天然气工业. 液化天然气影响设计和材料选择的特性

This International Standard gives guidance on the characteristics of liquefied natural gas (LNG) and the cryogenic materials used in the LNG industry. It also gives guidance on health and safety matters. It is intended to act as a reference document for the implementation of other standards in the liquefied natural gas field. It is intended as a reference for use by persons who design or operate LNG facilities.

Petroleum and natural gas industries - Characteristics of LNG, influencing the design, and material selection

BS PD ISO/TS 16901:2015 包括船/岸上支持接口的陆上液化天然气装置风险评估设计执行指南

Guidance on performing risk assessment in the design of onshore LNG installations including the ship/shore interface

ISO/TS 16901:2015 陆上液化天然气装置（包括船/岸界面）设计中的风险评估指南

Guidance on performing risk assessment in the design of onshore LNG installations including the ship/shore interface

ISO 15156-3:2015/Cor 1:2016 石油和天然气工业 - 用于石油和天然气生产中含H2S的环境中的材料 - 第2部分:耐开裂碳和低合金钢以及铸铁的使用

Petroleum and natural gas industries — Materials for use in H2S-containing environments in oil and gas production — Part 2: Cracking-resistant carbon and low-alloy steels, and the use of cast irons

GOST R 56539-2015 天然气和凝析气田的规划和开发. 根据物质平衡方程评估天然气和凝析气储量. 通用技术要求

Gas and gas-condensate fields projection and development. Estimation of gas and gas-condensate reserves on the basis of material balance equation. General technical requirements

GOST R 56352-2015 石油和天然气工业. 液化天然气的生产, 储存和搬运. 通用安全要求

Petroleum and natural gas industries. Production, storage and handling of liquefied natural gas. General safety requirements

GOST R 56830-2015 石油和天然气工业. 潜油电泵机组. 通用技术要求

Petroleum and natural gas industries. Electrical submersible pump units. General technical requirements

SY/T 7024-2014 高含硫化氢气田金属材料 现场硬度检验技术规范

本规范适用于天然气中硫化氢含量大于或等于5% (体积分数)的高含硫化氢气田集输系统(含净化厂原料气管道)直接接触硫化氢介质的碳钢和低合金钢、耐蚀合金材料的管道、感应加热弯管、管件、阀门、《石油天然气工业油气开采中用于含硫化氢环境的材料第2部分：抗开裂碳钢、低合金刚和铸铁》GB/T 20972. 2-2008中第A. 2. 2. 4条规定范围内的螺栓螺母的现场硬度检验。

Technical code for field hardness test of metal materials used in highly hydrogen sulfide gas field

SY/T 6416-2014 发动机的安装、操作和维护推荐作法

本标准规定了石油、天然气井场用往复式内燃发动机(以下简称“发动机”，包括柴油发动机、天然气发动机、柴油/天然气双燃料发动机及其辅助设备等)的安装、安全操作、维护保养及故障排除等推荐作法。 本标准适用于石油、天然气井场用发动机(包括柴油发动机、天然气发动机、柴油/天然气双燃料发动机及其辅助设备等)的安装、操作和维护等；其他用途的发动机可参照本标准执行。

Recommended practice for installation, operation and maintenance of engine

SY/T 6160-2014 防喷器检查和维修

本标准规定了对在役防喷器(以下简称防喷器)、钻井四通的检查、维修、检验和判废。 本标准适用于石油天然气钻井、井下作业用防喷器。 本标准不适用于钻井、修井现场的检查。

Check and maintenance of blowout preventer

SY/T 5244-2014 钻井液循环管汇

本标准规定了钻井液循环管汇(以下简称管汇)的型号、基本参数、技术要求、试验方法、检验规则、标志、贮存、包装、运输、安装、维护保养和安全检查等要求。 本标准适用于石油天然气钻井作业的陆地钻机和海洋钻井平台配套的管汇系统。固井管汇参照执行。 本标准所指的管汇包含以下主要部件： --刚性管线； --泥浆阀、地面阀门组、钻台阀门组； --过滤器、弯头、三通、四通等管件； --柔性管线； --活接头、焊颈法兰、卡箍联接器、密封垫环、螺栓、螺母； --安全链。

Drilling fluid circulation manifold

GOST R 55998-2014 石油和天然气工业. 海上生产装置. 疏散方法和临时安全避难所. 通用要求

Petroleum and natural gas industries. Offshore production installation. Evacuation ways and temporary safe refuges. General requirements

GOST R 55999-2014 气体管道的在役检查. 通用要求

In-line inspection of gas pipelines. General requirements

SY/T 6476-2013 管线钢管落锤撕裂试验方法

本标准规定了管线钢管落锤撕裂试验的定义、符号、设备、试样、试验、评定和报告等内容。本标准适用于管线钢管和制管用钢板、板卷的落锤撕裂试验和结果评定。

Practice for drop-weight tear tests on steel line pipe

SY/T 5530-2013 石油钻机和修井机用水龙头

本标准规定了石油钻机和修井机用水龙头(以下简称水龙头)的型号与基本参数、连接尺寸、技术要求、试验方法及检验规则、标志、包装、运输和贮存。本标准适用于石油、天然气钻井和修井作业用水龙头的设计、制造和检验。

Swivel for petroleum drilling and workover rigs

GOST R 55435-2013 石油和石油产品管道干线运输. 操作和维护. 通用原则

Oil and oil products trunk pipeline transportation. Operation and maintenance. General principles