共找到 1339 条与 铁合金 相关的标准,共 90 页
Ferrotitanium Determination of silicon, manganese, phosphorus, chromium, aluminum, magnesium, copper, vanadium and nickel content Inductively coupled plasma atomic emission spectrometry
Pig iron - Determination of multi-element content - Spark discharge atomic emission spectrometry (conventional method)
Ferrotitanium - Determination of titanium content - Diantipyrrolinemethane spectrophotometric method
Nickel-iron Arsenic, tin, antimony, lead and bismuth content Inductively coupled plasma mass spectrometry (ICP-MS)
Determination of ferrosilicon and phosphorus content bismuth phosphorus molybdenum blue spectrophotometry
Metal chromium powder for additive manufacturing
Determination of nickel iron carbon, sulfur, silicon, phosphorus, nickel, cobalt, chromium and copper content by spark source atomic emission spectrometry
本标准规定了锰铁的产品分类、技术要求、试验方法、检验规则和包装、储运、标志及质量证明书。本标准适用于炼钢、铸造用脱氧剂和合金元素添加剂的锰铁。
Ferromanganese Amendment No. 1
本文件描述了采用红外线吸收法和燃烧中和滴定法测定锰铁、锰硅合金、氮化锰铁及金属锰中的硫含量的方法。 本文件适用于锰铁、锰硅合金、氮化锰铁及金属锰中硫含量的测定。方法一测定范围(质量分数):0.003%~0.120%;方法二测定范围(质量分数):0.015%~0.120%。方法二不适用于氮化锰铁中硫含量的测定。
Ferromanganese,ferromanganese-silicon,nitrogen-bearing ferromanganese and manganese metal—Determination of sulfur content—Infrared absorption method and combustion-neutralization method
本文件描述了采用电位滴定法、硝酸铵氧化滴定法和高氯酸氧化滴定法测定锰铁、锰硅合金、氮化锰铁及金属锰中的锰含量的方法。 本文件适用于锰铁、锰硅合金、氮化锰铁及金属锰中锰含量的测定,测定范围(质量分数):50.00%~98.00%。方法一不适用于铬、钒含量(质量分数)大于0.4%的锰铁、锰硅合金、氮化锰铁及金属锰中锰含量的测定。
Ferromanganese,ferromanganese-silicon,nitrogen-bearing ferromanganese and manganese metal—Determination of manganese content—Potentiometric method, titrimetric method after ammonium nitrate oxidation
本文件描述了采用钼蓝分光光度法和铋磷钼蓝分光光度法测定锰铁、锰硅合金、氮化锰铁和金属锰中的磷含量的方法。 本文件适用于锰铁、锰硅合金、氮化锰铁和金属锰中磷含量的测定。测定范围(质量分数):0.0030%~0.650%。方法一:钼蓝分光光度法,适用于锰铁、锰硅合金、氮化锰铁和金属锰中磷含量的测定,测定范围(质量分数):0.0030%~0.450%;方法二:铋磷钼蓝分光光度法,适用于锰铁、锰硅合金、氮化锰铁和金属锰中磷含量的测定,测定范围(质量分数):0.0030%~0.650%。
Ferromanganese, ferromanganese-silicon, nitrogen-bearing ferromanganese and manganese metal—Determination of phosphorus content—Molybdenum blue spectrophotometric method and bismuth phosphomolybdate b
本文件规定了采用钼蓝分光光度法、氟硅酸钾滴定法和高氯酸重量法测定锰铁、锰硅合金、微低碳锰硅合金、氮化锰铁和金属锰中的硅含量。 本文件适用于锰铁、锰硅合金、微低碳锰硅合金、氮化锰铁和金属锰中硅含量的测定。测定范围(质量分数):0.10%~40.00%。方法一:钼蓝分光光度法,适用于金属锰中硅含量的测定,测定范围(质量分数)0.10%~2.00%;方法二:氟硅酸钾滴定法,适用于锰硅合金、微低碳锰硅合金中硅含量的测定,测定范围(质量分数)12.00%~40.00%;方法三:高氯酸重量法,适用于锰铁、锰硅合金、微低碳锰硅合金、氮化锰铁、金属锰中硅含量的测定,测定范围(质量分数)0.50%~40.00%。
Ferromanganese, ferromanganese-silicon, nitrogen-bearing ferromanganese and manganese metal—Determination of silicon content—Molybdenum blue spectrophotometric method, silicon potassium fluoride titri
本文件描述了用波长色散X射线荧光光谱法测定钒铁中钒、硅、磷、锰、铝、铁的含量。 本文件适用于分析钒铁中钒、硅、磷、锰、铝、铁含量的测定。各元素测定范围见表1。表1 测定范围测定范围(质量分数)元素%V42~82 Si 0.2~5.
Ferrovanadium—Determination of vanadium,silicon,phosphorus,manganese,aluminum,iron content—Wavelength dispersive X-ray fluorescence spectrometry
本文件规定了采用重量法测定铁合金水分含量的方法。 本文件适用于GB/T4010 中在烘干过程不易发生化学变化的铁合金和镍铁锭或块的交货批外来水分含量在0.010%~1.00%之间的水分含量测定。
Ferroalloys一Determination of moisture of lots一Gravimetric method
本文件规定了火焰原子吸收光谱法测定硅铁中的钙含量。 本文件适用于硅铁中钙含量的测定。测定范围(质量分数):0.050%~2.50%。
Ferrosilicon—Determination of calcium content—Flame atomic absorption spectrometry
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号