77.140.75 特殊用管钢 标准查询与下载
共找到 606 条与 特殊用管钢 相关的标准，共 41 页
Steel tubes for precision applications. Technical delivery conditions. Seamless cold drawn tubes
- ICS
- 77.140.75
- CCS
- H48
- 发布
- 2016-04-30
- 实施
- 2016-04-30
Steel tubes for precision applications. Technical delivery. Welded cold sized square and rectangular tubes
- ICS
- 77.140.75
- CCS
- H48
- 发布
- 2016-04-30
- 实施
- 2016-04-30
High strength steel tubes for steel tower (Amendment 1)
- ICS
- 77.140.75
- CCS
- H48
- 发布
- 2016-04-20
- 实施
This European Standard specifies the technical delivery conditions for seamless cold drawn steel tubes of circular cross section for precision applications with specified outside diameter D
Steel tubes for precision applications - Technical delivery conditions - Part 1: Seamless cold drawn tubes
- ICS
- 77.140.75
- CCS
- Q15
- 发布
- 2016-03
- 实施
This European Standard specifies the technical delivery conditions for welded cold sized steel tubes of circular cross section for precision applications with specified outside diameter D
Steel tubes for precision applications - Technical delivery conditions - Part 3: Welded cold sized tubes
- ICS
- 77.140.75
- CCS
- Q15
- 发布
- 2016-03
- 实施
This European Standard specifies the technical delivery conditions for welded cold drawn tubes of circular cross section for use in hydraulic and pneumatic power systems. Tubes according to this part of EN 10305 are characterized by having precisely defined tolerances on dimensions and a specified surface roughness. The allowed pressure rates and upper temperatures are the responsibility of the customer in accordance with the state of the art and in application of the safety coefficients specified in the applicable regulations, codes or standards. Concerning the lower temperature range applicability the impact energy requirements are given at 0 °C. NOTE Once this standard is published in the Official Journal of the European Union (OJEU) under Directive 2014/68/EU, presumption of conformity to the Essential Safety Requirements (ESRs) of Directive 2014/68/EU is limited to technical data of materials in this standard and does not presume adequacy of the material to a specific item of equipment. Consequently, the assessment of the technical data stated in this material standard against the design requirements of this specific item of equipment to verify that the ESRs of the Pressure Equipment Directive are satisfied, needs to be done.
Steel tubes for precision applications - Technical delivery conditions - Part 6: Welded cold drawn tubes for hydraulic and pneumatic power systems
- ICS
- 77.140.75
- CCS
- Q15
- 发布
- 2016-03
- 实施
This European Standard specifies the technical delivery conditions for welded cold drawn steel tubes of circular cross section for precision applications with specified outside diameter D
Steel tubes for precision applications - Technical delivery conditions - Part 2: Welded cold drawn tubes
- ICS
- 77.140.75
- CCS
- Q15
- 发布
- 2016-03
- 实施
This European Standard specifies the technical delivery conditions for welded cold sized steel tubes of square and rectangular cross section for precision applications. Tubes according to this document are characterized by having precisely defined tolerances on dimension and a specified maximum surface roughness. Typical fields of application are in the automotive, furniture and general engineering industries.
Steel tubes for precision applications - Technical delivery conditions - Part 5: Welded cold sized square and rectangular tubes
- ICS
- 77.140.75
- CCS
- Q15
- 发布
- 2016-03
- 实施
This European Standard specifies the technical delivery conditions for seamless cold drawn steel tubes of circular cross section used in hydraulic and pneumatic power systems. Tubes according to this document are characterized by having precisely defined tolerances on dimensions and a specified maximum surface roughness. The allowed pressure rates and upper temperatures are the responsibility of the customer in accordance with the state of the art and in application of the safety coefficients specified in the applicable regulations, codes or standards. Concerning the lower temperature range applicability the impact energy requirements are given at 0 °C. NOTE Once this standard is published in the Official Journal of the European Union (OJEU) under Directive 2014/68/EU, presumption of conformity to the Essential Safety Requirements (ESRs) of Directive 2014/68/EU is limited to technical data of materials in this standard and does not presume adequacy of the material to a specific item of equipment. Consequently, the assessment of the technical data stated in this material standard against the design requirements of this specific item of equipment to verify that the ESRs of the Pressure Equipment Directive are satisfied, needs to be done.
Steel tubes for precision applications - Technical delivery conditions - Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems
- ICS
- 77.140.75
- CCS
- Q15
- 发布
- 2016-03
- 实施
BS EN 10219-1. Cold formed welded structural steel hollow sections. Part 1. General
- ICS
- 77.140.75
- CCS
- 发布
- 2016-01-28
- 实施
- 2016-01-28
BS EN 10219-2. Cold formed welded structural steel hollow sections. Part 2. Technical delivery conditions
- ICS
- 77.140.75
- CCS
- 发布
- 2016-01-28
- 实施
- 2016-01-28
BS EN 10210-3. Hot finished structural steel hollow sections. Part 3. Tolerances, dimensions and sectional properties
- ICS
- 77.140.75
- CCS
- 发布
- 2016-01-28
- 实施
- 2016-01-28
BS EN 10210-1. Hot finished structural steel hollow sections. Part 1. General
- ICS
- 77.140.75
- CCS
- 发布
- 2016-01-28
- 实施
- 2016-01-28
BS EN 10210-2. Hot finished structural steel hollow sections. Part 2. Technical delivery conditions
- ICS
- 77.140.75
- CCS
- 发布
- 2016-01-28
- 实施
- 2016-01-28
1.1 This specification covers electric-fusion (arc)-welded straight seam or spiral seam steel casing pipe 10 in. (254 mm) and larger in diameter (outside diameter as specified by purchaser) with wall thickness 0.200 in. (5.1 mm) or greater. It shall be permissible to specify and furnish pipe having other dimensions provided such pipe complies with all other requirements of this specification. The pipe is intended for use as casing or encasement in horizontal underground boring, tunneling, or open trench applications. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 The text of this specification contains notes and footnotes that provide explanatory material. Such notes and footnotes, excluding those in tables and figures, do not contain any mandatory requirements. 1.4 The following precautionary caveat pertains only to the test method portion, Sections 11, 12, and 13 of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Standard Specification for Steel Casing Pipe, Electric-Fusion (Arc)-Welded (Outside Diameter of 10 in. and Larger)
- ICS
- 77.140.75
- CCS
- H48
- 发布
- 2016
- 实施
Seamless steel tubes for pressure purposes－Technical delivery conditions－Part 3：Unalloyed and alloyed steels with specified low temperature properties
- ICS
- 77.140.75
- CCS
- 发布
- 20151222
- 实施
- 20151222
Seamless steel tubes for pressure purposes－Technical delivery conditions－Part 3：Unalloyed and alloyed steels with specified low temperature properties
- ICS
- 77.140.75
- CCS
- 发布
- 2015-12-22
- 实施
Seamless steel tubes for pressure purposes－Technical delivery conditions－Part 4：Austenitic stainless steels
- ICS
- 77.140.75
- CCS
- 发布
- 2015-12-22
- 实施
Inspection regulations for import and export steel pipes Part 6: Welded steel pipes and galvanized welded steel pipes for low-pressure fluid transportation
- ICS
- 77.140.75
- CCS
- H48
- 发布
- 2015-12-04
- 实施
- 2016-07-01
Inspection Regulations for Import and Export Steel Pipes Part 5: Seamless Pipes for Geological Petroleum Drilling Casings
- ICS
- 77.140.75
- CCS
- H48
- 发布
- 2015-12-04
- 实施
- 2016-07-01
