77.140.75 特殊用管钢 标准查询与下载

SN/T 4367.1-2015 进出口钢管检验规程 第1部分：焊缝锅炉管

Inspection Regulations for Import and Export Steel Pipes Part 1: Welded Boiler Pipes

SN/T 4367.7-2015 进出口钢管检验规程 第7部分：电线套管

Inspection Regulations for Import and Export Steel Pipes Part 7: Wire Casings

SN/T 4367.8-2015 进出口钢管检验规程 第8部分：异型钢管

Inspection regulations for import and export steel pipes Part 8: Special-shaped steel pipes

SN/T 4367.3-2015 进出口钢管检验规程 第3部分：石油天然气道无缝管

Inspection Regulations for Import and Export Steel Pipes Part 3: Seamless Pipes for Oil and Gas Pipelines

TIS 1439-2015 锅炉、过热器、热交换器和冷凝器用奥氏体不锈钢管

Austenitic stainless steel tubes for boiler,superheater,heat-exchanger,and condenser

ASTM A1085/A1085M-15 冷成型焊接碳钢中空结构截面 (HSS) 的标准规格

1.1 This specification covers cold-formed welded carbon steel hollow structural sections (HSS) for welded or bolted construction. These shapes are utilized in but not limited to the following applications: buildings, bridges, towers, cranes, sign supports and poles, off-shore production and drilling platforms, roll-over protective structures (ROPS), falling object protective structures (FOPS), and amusement rides. 1.2 This HSS is produced in welded sizes with a periphery of 88 in. [2235 mm] or less, and a specified nominal wall thickness of 0.148 in. [3.8 mm] or greater and 0.875 in. [22 mm] or less. 1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. The inch-pound units shall apply unless the “M” designation of this specification is specified in the order. 1.4 The text of this specification contains notes and footnotes that provide explanatory material. Such notes and footnotes, excluding those in tables and figures, do not contain any mandatory requirements.

Standard Specification for Cold-Formed Welded Carbon Steel Hollow Structural Sections (HSS)

GOST 33229-2015 锅炉和换热设备用管道. 技术规格. 第1部分. 工作压力不超过6.4 MPa且工作温度不超过400 ℃的无缝钢管

Tubes for boiler and heat exchanging equipment. Technical specifications. Part 1. Seamless steel pipes to work under pressure not more than 6,4 MPa and at temperatures not exceeding 400 C

GOST R 56403-2015 石油和石油产品输送用干线管道. 钢焊接管. 技术要求

Trunk pipelines for oil and oil products transportation. Welded steel pipes. Specifications

YB/T 4414-2014 瓦楞纸板机械用无缝钢管

本标准规定了瓦楞纸板机械用无缝钢管的订货内容、尺寸、外形和重量、技术要求、试验方法、检验规则、包装、标志和质量证明书。本标准适用于制造瓦楞纸板机械设备中瓦楞辊、压力辊和预热辊,以及印刷机械设备中涂胶辊和印刷辊用无缝钢管。

Seamless steel tubes for corrugated fibreboard machine

YB/T 4400-2014 汽车结构用异型无缝钢管

本标准规定了汽车结构用异型无缝钢管的分类、代号、订货内容、尺寸、外形、重量及允许偏差、技术要求、检验和试验方法、检验规则、包装、标志和质量证明书。本标准适用于汽车结构用异型无缝钢管(以下简称钢管)。

Shaped seamless steel tubes for automobile framework

YB/T 4371-2014 油气井射孔枪用无缝钢管

本标准规定了油气井射孔枪用无缝钢管的尺寸、外形及重量、技术要求、试验方法、检验规则、包装、标志和质量证明书。本标准适用于油气井射孔枪用无缝钢管(以下简称“钢管”)。

Seamless steel tubes for perforating guns for oil and gas wells

YB/T 4370-2014 城镇燃气输送用不锈钢焊接钢管

本标准规定了城镇燃气输送用不锈钢焊接钢管的分类、代号、尺寸、外形、重量及允许偏差、技术要求、试验方法、检验规则、包装、标志和质量证明书。本标准适用于公称压力(PN)不超过0. 4MPa的城镇燃气输送用不锈钢焊接钢管(以下简称“钢管”)。

Welded stainless steel tubes for city gas transportion

YB/T 4399-2014 塔架用高性能异型无缝钢管

本标准规定了塔架用高性能异型无缝钢管的分类、代号、订货内容、尺寸、外形、重量及允许偏差、技术要求、检验和试验方法、检验规则、包装、标志和质量证明书。本标准适用于建筑、通信铁塔、电力铁塔、航空航天发射塔等塔架用高性能异型无缝钢管(以下简称钢管)。

High performance shaped seamless steel tubes for tower framework

YB/T 171-2014 复杂断面异型钢管

本标准规定了复杂断面异型钢管的分类、代号、形状、订货内容、尺寸、技术要求、试验方法、检验规则、包装、标志和质量证明书。本标准适用于碳素结构钢、优质碳素结构钢和低合金高强度结构钢制成的结构用复杂断面异型钢管(简称钢管)。

Special shaped steel tubes

JIS G 3474:2014 钢塔用高拉伸强度钢管

This Japanese Industrial Standard specifies the high tensile strength steel tubes principally used for transmission steel towers (hereafter referred to as "tubes"). This Standard generally applies to tubes of outside diameter 139.8 mm to I 117.6 mm. In addition to the items specified in this text, the special quality requirements which the purchaser can previously designate upon the agreement with the manufacturer are specified in Annex A.

High strength steel tubes for steel tower

KS D ISO 2937-2013 机械用平端无缝钢管

Plain end seamless steel tubes for mechanical application

KS D ISO 630-2:2013 结构钢 第2部分：结构钢通用目的技术交货条件

Structural steels-Part 2:Technical delivery requirements for hot-finished hollow sections

KS D ISO 4019:2013 结构钢 冷成型、焊接、结构中空截面 尺寸和截面特性

Structural steels－Cold-formed, welded, structural hollow sections－Dimensions and sectional properties

KS D ISO 2937:2013 机械用光端无缝钢管

Plain end seamless steel tubes for mechanical application

KS D ISO 10799:2013 非合金及细晶粒结构钢的冷成型焊接结构空心型材 技术交货条件

Structural steels－Cold－formed, welded, structural hollow sections－Technical delivery requirements