77.140.75 特殊用管钢 标准查询与下载
共找到 606 条与 特殊用管钢 相关的标准，共 41 页
本部分规定了压水堆核电厂蒸汽发生器传热管用镍-铬-铁合金(NS3105)无缝U形管的制造、试验、检验和验收等要求。本部分适用于压水堆核电厂蒸汽发生器传热管用镍-铬-铁合金(NS3105)无缝U形管。
Other materials for pressurized water reactor nuclear power plants.Part 7: seamless nickel-chromium-iron alloy for steam generator tubes bundles
- ICS
- 77.140.75
- CCS
- H48
- 发布
- 2013-06-08
- 实施
- 2013-10-01
本部分规定了压水堆核电厂用2、3级热交换器传热管用冷轧、冷拔奥氏体不锈钢无缝钢管的制造、化学成分、力学性能、试验方法、无损检测等技术要求。本部分适用于压水堆核电厂2、3级热交换器传热管用公称壁厚为0.8mm~3.0mm的冷轧、冷拔奥氏体不锈钢无缝直管与弯管。
Stainless steel for pressurized water reactor power plant.Part 10: Cold rolled or cold drawn seamless austenitic stainless steel tubes for class 2 and 3 heat exchangers
- ICS
- 77.140.75
- CCS
- H48
- 发布
- 2013-06-08
- 实施
- 2013-10-01
本部分规定了压水堆核电厂用填充金属焊接的1、2、3级奥氏体不锈钢钢管的制造、化学成分、力学性能、试验方法、检验规则等技术要求。本部分适用于压水堆核电厂用填充金属焊接且公称壁厚不超过50 mm的1、2、3级奥氏体不锈钢钢管。
Stainless steel for pressurized water reactor power plant.Part 11: Class 1, 2 and 3 austenitic stainless steel pipes welded with the addition of filler metal
- ICS
- 77.140.75
- CCS
- H48
- 发布
- 2013-06-08
- 实施
- 2013-10-01
This SAE information report provides a means to understand the various methods of evaluating the integrity of steel tubing without the need of destroying the tubing. This report describes eddy current testing, flux leakage testing, ultrasonic testing, and magnetic particle testing of steel tubing. The primary purpose of these methods of testing steel tubing is to look for flaws in the tubing, such as discontinuities, seams, cracks, holes, voids and other imperfections characteristic to the specific construction of the tubing. This information report is written so the average person can understand its meaning, even though they may not be familiar with steel
Carbon Steel Tubing for General Use Understanding Nondestructive Testing for Carbon Steel Tubing
- ICS
- 77.140.75
- CCS
- H48
- 发布
- 2013-05-14
- 实施
本标准规定了高强度耐候焊接钢管的尺寸、外形、重量及允许偏差、技术要求、试验方法、检验规则、包装、标志及质量证明书。本标准适用于建筑结构中使用的桩柱、塔架、支柱、网架结构及其他结构用直缝耐候焊接钢管。
Welded steel tubes with atmospheric corrosion resistance for structural purposes
- ICS
- 77.140.75
- CCS
- H48
- 发布
- 2013-04-25
- 实施
- 2013-09-01
本标准规定了深井水泵用焊接钢管的尺寸、外形、重量、技术要求、试验方法、检验规则、包装、标志及质量证明书。本标准适用于深井水泵、潜水电泵用直缝焊接钢管。
Welded steel pipes for water pump of deep well
- ICS
- 77.140.75
- CCS
- H48
- 发布
- 2013-04-25
- 实施
- 2013-09-01
本标准规定了流体输送用冶金复合双金属无缝钢管的订货内容、尺寸、外形、重量、技术要求、试验方法、检验规则、包装、标志及质量证明书。本标准适用于腐蚀、磨削流体介质输送用冶金复合双金属无缝钢管(以下简称“钢管”)。
Metallurgy composite bi-metal seamless steel tubes for liquid service
- ICS
- 77.140.75
- CCS
- H48
- 发布
- 2013-04-25
- 实施
- 2013-09-01
本标准规定了流体输送用大直径碳素结构钢无缝钢管的分类和代号、尺寸、外形、重量、技术要求、试验方法、检验规则、包装、标志和质量证明书。本标准适用于外径不小于426mm的石油化工、煤制油装置工艺配管及其他一般流体输送用碳素结构钢无缝钢管(以下简称钢管)。
Large diameter carbon structural seamless steel pipes for liquid service
- ICS
- 77.140.75
- CCS
- H48
- 发布
- 2013-04-25
- 实施
- 2013-09-01
本标准规定了流体输送用大直径合金结构钢无缝钢管的分类和代号、尺寸、外形、重量、技术要求、试验方法、检验规则、包装、标志和质量证明书。本标准适用于外径不小于426mm的石油化工、煤制油装置工艺配管及其他一般流体输送用合金结构钢无缝钢管(以下简称钢管)。
Large diameter alloy structural seamless steel pipes for liquid service
- ICS
- 77.140.75
- CCS
- H48
- 发布
- 2013-04-25
- 实施
- 2013-09-01
本标准规定了大直径奥氏体不锈钢无缝钢管的分类、代号、尺寸、外形、重量、技术要求、试验方法、检验规则、包装、标志和质量证明书。本标准适用于外径不小于426mm的石油化工和煤化工装置,电站设备和配套设施用奥氏体不锈钢无缝钢管(以下简称钢管)。
Large diameter seamless austenitic stainless steel pipes
- ICS
- 77.140.75
- CCS
- H48
- 发布
- 2013-04-25
- 实施
- 2013-09-01
This Japanese Industrial Standard specifies the seamless steel tubes (hereafter referred to as "tubes") used for the manufacture of steel high pressure gas cylinders specified in JIS B8230 and JIS B8241.
Seamless steel tubes for high pressure gas cylinders
- ICS
- 77.140.75
- CCS
- H48
- 发布
- 2013-03-21
- 实施
Pipa baja saluran air dengan atau tanpa lapisan seng
- ICS
- 77.140.75
- CCS
- 发布
- 2013
- 实施
Tubes for boiler and heat exchanging equipment. Specifications. Part 1. Seamless steel pipes to work under pressure not more than 6,4 MPa and at temperatures not exceeding 400 °C
- ICS
- 77.140.75
- CCS
- 发布
- 2013
- 实施
- 2013-12-01
This European Standard specifies the requirements for non-alloy steel tubes for use with EN 74 couplers in the construction of falsework and working scaffolds. It includes detailed requirements for marking to aid long term identification, for protective coating by reference to European and International Standards, and for inspection and testing. NOTE 1: Tubes to this European Standard, which have a specified outside diameter of 48,3 mm and specified thickness of 3,2 mm or 4,0 mm, may also be used in conjunction with other sizes and grades of steel tubes for applications such as prefabricated scaffolds. NOTE 2: The use of these tubes should be in accordance with appropriate International and national requirements, for example prEN12811 and prEN12812
Loose steel tubes for tube and coupler scaffolds – Technical delivery conditions
- ICS
- 77.140.75
- CCS
- 发布
- 2012-12-31
- 实施
本部分规定了压水堆核电厂反应堆冷却剂管道用奥氏体-铁素体不锈钢离心浇铸管的制造、化学成分、力学性能、组织检验和无损检测等技术要求。本部分适用于压水堆核电厂反应堆冷却剂管道用ZG04Cr20Ni9奥氏体-铁素体不锈钢离心浇铸管。
Stainless steel for pressurized water reactor nuclear power plants.Part 26:Austenitic-ferritic stainless steel centrifugally cast pipes for reactor coolant piping
- ICS
- 77.140.75
- CCS
- H48
- 发布
- 2012-10-19
- 实施
- 2013-03-01
General specification for cement mortar lining sealing layer of ductile iron pipes and fittings
- ICS
- 77.140.75
- CCS
- H 48
- 发布
- 2012-09-05
- 实施
- 2012-09-15
Hollow bars for machining - Technical delivery conditions - Part 2: Stainless steels with specified machinability properties
- ICS
- 77.140.75
- CCS
- 发布
- 2012-05-31
- 实施
- 2012-05-31
Hollow bars for machining - Technical delivery conditions - Part 2: Stainless steels with specified machinability properties; German version EN 10294-2:2012
- ICS
- 77.140.75
- CCS
- H44
- 发布
- 2012-04
- 实施
Hollow bars for machining. Technical delivery conditions. Stainless steels with specified machinability properties
- ICS
- 77.140.75
- CCS
- H48
- 发布
- 2012-02-29
- 实施
- 2012-02-29
This part of EN 10294 specifies the technical delivery conditions for seamless hollow bars made of austenitic (including creep resisting steels) and austenitic-ferritic (duplex) stainless steels, with specified machinability properties, intended for the manufacture of engineering components by machining.
Hollow bars for machining - Technical delivery conditions - Part 2: Stainless steels with specified machinability properties
- ICS
- 77.140.75
- CCS
- 发布
- 2012-02-01
- 实施
