77.140.75 特殊用管钢 标准查询与下载
共找到 606 条与 特殊用管钢 相关的标准，共 41 页
本部分规定了压水堆核电厂2、3级热交换器用20碳钢无缝冷拔传热管的订货要求、制造、化学成分、力学性能和工艺性能、表面质量、无损检测、水压试验等技术要求。 本部分适用于压水堆核电厂名义外径不超过25mm、名义壁厚不超过3.2mm的2、3级热交换器用20碳钢无缝冷拔传热管。
Carbon steel and low alloy steel for pressurized water reactor nuclear power plants.Part 13:Seamless drawn carbon steel tubes for class 2 and 3 heat exchangers
- ICS
- 77.140.75
- CCS
- H48
- 发布
- 2012-01-06
- 实施
- 2012-04-06
本标准规定了压水堆核电厂S1、S2级支承件用碳钢和低合金钢无缝钢管的制造、试验、检验和验收等技术要求。 本部分适用于压水堆核电厂S1、S2级支承件用碳钢和低合金钢无缝钢管。
Carbon steel and low alloy steel for pressurized water reactor nuclear power plant.Part 11:Seamless pipes for class S1 and S2 supports
- ICS
- 77.140.75
- CCS
- H48
- 发布
- 2012-01-06
- 实施
- 2012-04-06
本部分规定了压水堆核电厂反应堆控制棒驱动机构用12Cr13马氏体不锈钢无缝钢管的制造、化学成分、力学性能、试验方法、检验规则等技术要求。 本部分适用于压水堆核电厂反应堆控制棒驱动机构驱动杆用的12Cr13马氏体不锈钢无缝钢管。
Stainless steel for pressurized water reactor nuclear power plants.Part 22：Seamless pipes made from martensitic stainless steel for drive rods of reactor control rod drive mechanisms
- ICS
- 77.140.75
- CCS
- H48
- 发布
- 2012-01-06
- 实施
- 2012-04-06
Steel weldes pipes for trunk gas pipelines, oil pipelines and oil products pipelines. Specifications
- ICS
- 77.140.75
- CCS
- 发布
- 2012
- 实施
- 2015-01-01
Steel tubes for fired heater (Amendment 1)
- ICS
- 77.140.75
- CCS
- H48
- 发布
- 2011-11-21
- 实施
This part of this European Standard specifies the technical delivery conditions for cold formed welded structural hollow sections of circular, square or rectangular forms and applies to structural hollow sections formed cold without subsequent heat treatment. Requirements for tolerances, dimensions and sectional properties are contained in EN 10219-2. NOTE A range of steel grades is specified in this European Standard and the user should select the grade appropriate to the intended use and service conditions. The grades and mechanical properties of the finished hollow sections are compatible with those in EN 10025-2 and EN 10025-3.
Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions
- ICS
- 77.140.75
- CCS
- 发布
- 2011-10-12
- 实施
Cold-formed welded structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions
- ICS
- 77.140.75
- CCS
- H48
- 发布
- 2011-09
- 实施
Hot-finished structural hollow sections of non-alloy and fine grain steels - Part 2: Dimensions and sectional properties
- ICS
- 77.140.75
- CCS
- H48
- 发布
- 2011-09
- 实施
Cold-formed welded structural hollow sections of non-alloy and fine grain steels - Part 2: Dimensions and sectional properties
- ICS
- 77.140.75
- CCS
- H44
- 发布
- 2011-09
- 实施
Hot-finished structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions
- ICS
- 77.140.75
- CCS
- H48
- 发布
- 2011-09
- 实施
This Standard has the objective to evaluate the performance of non-metallic underground pipes in high density polyethylene (HDPE) for the systems of underground and overground storage of fuels, establishing tests to ensure the operational characteristics of supply of fl ammable liquids and fuels.
Storage of flammable and combustible liquids - Non-metallic piping
- ICS
- 77.140.75
- CCS
- 发布
- 2011-07-11
- 实施
- 2011-08-11
Steel tubes for precision applications - Technical delivery conditions - Part 4 : seamless cold drawn tubes for hydraulic and pneumatic power systems.
- ICS
- 77.140.75
- CCS
- H48
- 发布
- 2011-06-01
- 实施
- 2011-06-11
本标准适用于公称压力 PN≤1.5 MPa、公称通径 DN 100～600 mm、工作介质为≤120℃的清水、污水的哈夫节。
Half machanism of ductile iron
- ICS
- 77.140.75
- CCS
- H48
- 发布
- 2011-05-10
- 实施
- 2011-06-10
本标准适用于以下用途的球铁管件：给、排水（指净水、污水）、有/无压力、地下/地上铺设。
Fittings of ductile iron for Water supply and drainage
- ICS
- 77.140.75
- CCS
- H48
- 发布
- 2011-05-10
- 实施
- 2011-06-10
Steel tubes for precision applications - Technical delivery conditions - Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems
- ICS
- 77.140.75
- CCS
- 发布
- 2011-04-29
- 实施
- 2011-04-29
This European Standard specifies the technical delivery conditions for seamless cold drawn steel tubes of circular cross section used in hydraulic and pneumatic power systems with specified outside diameter D
Steel tubes for precision applications - Technical delivery conditions - Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems; German version EN 10305-4:2011
- ICS
- 77.140.75
- CCS
- H48
- 发布
- 2011-04
- 实施
이 표준은 내식용, 수도용 배관에 사용하는 스테인리스 라인드 강관(이하, 라인드 강관이라
Stainless lined steel pipe
- ICS
- 77.140.75
- CCS
- H40
- 发布
- 2011-03-29
- 实施
- 2011-03-29
Steel tubes for precision applications. Technical delivery conditions. Seamless cold drawn tubes for hydraulic and pneumatic power systems
- ICS
- 77.140.75
- CCS
- H48
- 发布
- 2011-02-28
- 实施
- 2011-02-28
