77.140.85 钢铁锻件 标准查询与下载

GB/T 25135-2010 锻造工艺质量控制规范

本标准规定了模锻件的产品开发以及从原材料到产品交付的工艺过程中，通用的过程控制方法和要求。 本标准适用于锻造企业进行锻造工艺质量的控制″

The quality control criterion of forging technology

GB/T 22131-2008 筒形锻件内表面超声波检测方法

本标准规定了从筒形锻件内表面进行超声波探伤的基本步骤。 本标准适用于手工检测方式，但不限制使用其他检测方式，如机械化或自动化检测方式。 本标准适用于内径尺寸≥63.5mm的筒形锻件。 本标准未涉及与使用有关的安全问题。本标准的使用者有责任在使用前制订合适的安全和保健措施，并确定其适用范围。

Practice for ultrasonic examination from bored surfaces of cylindrical forgings

GB/T 21469-2008 锤上钢质自由锻件机械加工余量与公差.一般要求

本标准规定了锤上钢质自由锻件的机械加工余量与公差及其使用的一般要求。 本标准适用于含碳量不超过0.9%和其他合金成分总含量不超过4%的碳素钢和合金钢的自由锻件。 凡超越本标准规定范围的自由锻件，其机械加工余量与公差由供需双方另行协商确定。

Machining allowances and tolerances for steel open die forgings on hammer.General requirement

GB/T 21470-2008 锤上钢质自由锻件机械加工余量与公差 盘 柱 环 筒类

本标准规定了盘、柱、带孔圆盘、圆环、套筒等各类自由锻件的机械加工余量与公差。 本标准适用于含碳量不超过O.9％和其他合金成分总含量不超过4％的碳素钢和合金钢的自由锻件。 凡超越本标准规定范围的自由锻件，其余量与公差由供需双方另行协商确定。

Machining allowances and tolerances for steel open die forgings on hammer.Disks,columns,rings and seamless cylindrical sleeves

GB/T 21471-2008 锤上钢质自由锻件机械加工余量与公差 轴类

本标准规定了光轴、台阶轴和单拐曲轴类自由锻件的机械加工余量与公差，以及黑皮锻件的允许极限偏差。 本标准适用于含碳量不超过0.9％和其他合金成分总含量不超过4％的碳素钢和合金钢的自由锻件。 凡超越本标准规定范围的自由锻件，其余量与公差由供需双方另行协商确定。

Machining allowancs and tolerances for steel open die forgings on hammer.Shafts

GB/T 20911-2007 锻造用半成品尺寸.形状和质量公差

本标准规定了将通过锻造进行热成形的半成品的尺寸、形状和质量公差，即由以下材料制成的钢锭（Blooms）、扁坯（Slabs）和钢坯（Billets）： ——符合EN l0250-1～4的一般用途钢材（参见参考文献） ——符合EN l0222-1～5的压力用途钢材（参见参考文献） 本标准不包含EN l0243-1（参见参考文献）中需进行自由锻造的半成品。

Semi finished products for forging.Tolerances on dimensions shape and mass

GB/T 13320-2007 钢质模锻件 金相组织评级图及评定方法

本标准规定了钢质模锻件的金相组织评级图（以下简称评级图）及评定方法。 本标准适用于经过调质处理、正火处理、等温正火处理、锻后控冷处理的结构钢模锻件。 本标准不适用于对锻件脱碳、过热、过烧等组织的评定。

Metellographic grading atlas and assessing method for steel die forgings

ASTM A456/A456M-24 大型曲轴锻件的磁粉检验标准规范

Standard Specification for Magnetic Particle Examination of Large Crankshaft Forgings

ASTM A105/A105M-24 管道用碳钢锻件的标准规范

Standard Specification for Carbon Steel Forgings for Piping Applications

ASTM A471/A471M-19(2024) 涡轮机转子盘和叶轮用真空处理合金钢锻件的标准规范

Standard Specification for Vacuum-Treated Alloy Steel Forgings for Turbine Rotor Disks and Wheels

ASTM A1090/A1090M-19(2024) 动力传输结构中用作底板的锻造环和空心件的标准规范

Standard Specification for Forged Rings and Hollows for Use as Base Plates in Power Transmission Structures

JB/T 14452-2023 钢质楔横轧件材料消耗工艺定额编制要求

Requirements for preparation of material consumption process quotas for steel cross-wedge rolled parts

JB/T 14451-2023 钢质锻件锻造生产能源消耗限额及评价方法

Energy consumption limit and evaluation method for steel forging production

ASTM A336/A336M-23 压力和高温部件用合金钢锻件标准规范

Standard Specification for Alloy Steel Forgings for Pressure and High-Temperature Parts

ASTM A472/A472M-23 汽轮机轴和转子锻件的热稳定性标准规范

Standard Specification for Heat Stability of Steam Turbine Shafts and Rotor Forgings

T/QGCML 1606-2023 模锻件检测技术规范

本文件规定了模锻件检测的术语和定义、主要控制点及要求、检测规则、检测方法。 本文件适用于模锻件的检测、质量控制。

Technical specifications for inspection of die forgings

ASTM A473-23a 不锈钢锻件标准规范

Standard Specification for Stainless Steel Forgings

ASTM A181/A181M-23 通用管道用碳钢锻件标准规范

1.1 This specification2 covers nonstandard as-forged fittings, valve components, and parts for general service. Forgings made to this specification are limited to a maximum weight of 10 000 lb [4540 kg]. Larger forgings may be ordered to Specification A266/A266M. 1.2 Two classes of material are covered, designated as Classes 60 and 70, respectively, and are classified in accordance with their mechanical properties as specified in 6.1. 1.3 This specification is expressed in both inch-pound units and SI units. However, unless the order specifies the applicable “M” specification designation (SI units), the material shall be furnished to inch-pound units. 1.4 The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the specification. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Carbon Steel Forgings, for General-Purpose Piping

ASTM A105/A105M-23 管道用碳素钢锻件标准规范

1.1 This specification2 covers forged carbon steel piping components for ambientand higher-temperature service in pressure systems. Included are flanges, fittings, valves, and similar parts ordered either to dimensions specified by the purchaser or to dimensional standards such as the MSS, ASME, and API specifications referenced in Section 2. Forgings made to this specification are limited to a maximum weight of 10 000 lb [4540 kg]. Larger forgings may be ordered to Specification A266/A266M. Tubesheets and hollow cylindrical forgings for pressure vessel shells are not included within the scope of this specification. Although this specification covers some piping components machined from rolled bar and seamless tubular products (see 5.2), it does not cover raw material produced in these product forms. 1.2 Supplementary requirements are provided for use when additional testing or inspection is desired. These shall apply only when specified individually by the purchaser in the order. 1.3 Specification A266/A266M covers other steel forgings and Specifications A675/A675M and A696 cover other steel bars. 1.4 This specification is expressed in both inch-pound units and SI units. However, unless the order specifies the applicable “M” specification designation (SI units), the material shall be furnished to inch-pound units. The values stated in either SI units or inch-pound units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the standard. NOTE 1—The dimensionless designator NPS (nominal pipe size) has been substituted in this standard for such traditional terms as “nominal diameter,” “size,” and “nominal size.” 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Carbon Steel Forgings for Piping Applications

ASTM A668/A668M-23 一般工业用碳素钢和合金钢锻件标准规范

1.1 This specification covers untreated and heat-treated carbon and alloy steel forgings for general industrial use. Other ASTM specifications for forgings are available for specific applications such as pressure vessels, railroad use, turbine generators, gearing, and others involving special temperature requirements. 1.2 Hot-rolled or cold finished bars are not within the scope of this specification. 1.3 Six classes of carbon steel and seven classes of alloy steel forgings are listed (see Section 7), which indicate their required heat treatments, as well as mechanical properties. 1.4 Provision, with the suffix H for certification and marking, for the supply of forgings after hardness testing only. 1.5 Supplementary requirements, including those in Specification A788/A788M, of an optional nature are provided. These shall apply only when specified by the purchaser. 1.6 Appendix X1 lists the current classes corresponding to the various classes of Specifications A235, A237, and A243, which have been superseded by this specification. 1.7 The values stated in either SI units or inch-pound units are to be regarded separately as standard; within the text and tables, the SI units are shown in brackets. The values stated in each system are not necessarily exact equivalents; therefore, to ensure conformance with the standard, each system shall be used independently of the other, and values from the two systems shall not be combined. 1.8 Unless the order specifies the applicable “M” specification, the forgings shall be furnished to the inch-pound units. 1.9 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use