79.120.10 木工机械 标准查询与下载
共找到 1176 条与 木工机械 相关的标准，共 79 页
ISO 19085-4:2018 gives the safety requirements and measures for manually loaded and unloaded stationary vertical panel sawing machines, hereinafter referred to as "machines". NOTE 1 In manual loading, the operator puts the work-piece directly onto the work-piece support, with no intermediate loading device to receive and transfer the work-piece from the operator to the cutting position. In manual unloading, the operator removes the work-piece directly from the work-piece support, with no intermediate unloading device to transfer the work-piece from the cutting position to the operator. ISO 19085-4:2018 deals with all significant hazards, hazardous situations and events as listed in Clause 4 relevant to machines, when operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse. Also, transport, assembly, dismantling, disabling and scrapping phases are taken into account. NOTE 2 For relevant but not significant hazards, e.g. sharp edges of the machine frame, see ISO 12100:2010. ISO 19085-4:2018 is also applicable to machines fitted with one or more of the following devices/additional working units, whose hazards have been dealt with: - an integrated feed device; - a device for scoring; - an angle cutting device; - a middle support device; - programmable end stops for parallel vertical cuts; - a device for grooving with a width of at most 20 mm in one pass by using a milling tool; and - a panel pusher. The machines are designed for cutting panels consisting of: a) solid wood; b) material with similar physical characteristics to wood (see ISO 19085‑1:2017, 3.2); c) composite materials with core consisting, for example, of polyurethane or mineral material laminated with light alloy; d) polymer-matrix composite materials and reinforced thermoplastic/thermoset/elastomeric materials; and e) gypsum boards, gypsum bounded fibreboards. ISO 19085-4:2018 does not apply to machines - with pressure beam and saw unit mounted behind the work-piece support; - where the guide rails on which the saw unit moves vertically are fixed on the machine frame and the horizontal cut can only be made by manually feeding the panel; - designed to cut in vertical direction only; - which are displaceable; - automatically performing two or more cutting cycles in sequence; - intended for use in potentially explosive atmosphere; and - manufactured before the date of its publication.
Woodworking machines — Safety — Part 4: Vertical panel circular sawing machines
- ICS
- 79.120.10
- CCS
- 发布
- 2022-05-12
- 实施
本文件包含数控六面钻的技术要求、试验方法、检验规则、标志、包装、运输和贮存。
CNC six side drill
- ICS
- 79.120.10
- CCS
- C352
- 发布
- 2021-12-13
- 实施
- 2021-12-13
This document gives the safety requirements and measures for edge banding machines fed by chains with manual loading and unloading and maximum work-piece height capacity of 100 mm hereinafter referred as \
Woodworking machines - Safety - Part 17: Edge banding machines fed by chains (ISO 19085-17:2021); German version EN ISO 19085-17:2021
- ICS
- 79.120.10
- CCS
- 发布
- 2021-12-00
- 实施
What is ISO 19085-16 - Table band saws and band re-saws about? ISO 19085-16 gives the safety requirements and measures for table band saws and band resaws, with manual loading and/or unloading and suitable for continuous production use, hereinafter referred to as “machines”. The machines are designed to cut solid wood and material with similar physical characteristics to wood. ISO 19085-16 deals with all significant hazards, hazardous situations, and events, listed in Annex A , relevant to the machines, when operated, adjusted, and maintained as intended and under the conditions foreseen by the manufacturer; reasonably foreseeable misuse has been considered too. Also, transport, assembly, dismantling, disabling, and scrapping phases have been taken into account.
Woodworking machines. Safety. Table band saws and band re-saws
- ICS
- 79.120.10
- CCS
- 发布
- 2021-11-30
- 实施
- 2021-11-30
This document gives the safety requirements and measures for table band saws and band resaws, with manual loading and/or unloading and suitable for continuous production use, hereinafter referred to as “machines”. The machines are designed to cut solid wood and material with similar physical characteristics to wood. It deals with all significant hazards, hazardous situations and events, listed in Annex A, relevant to the machines, when operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer; reasonably foreseeable misuse has been considered too. Also, transport, assembly, dismantling, disabling and scrapping phases have been taken into account. It is also applicable to machines fitted with one or more of the following devices/additional working units, whose hazards have been dealt with: a) device to tilt the table; b) device to tilt the saw unit. This document does not apply to: 1) machines driven by combustion engines or power take offs (PTO); 2) log band sawing machines; NOTE Log band sawing machines are covered by EN 1807-2:2013. 3) horizontal band saws and band resaws; 4) machines designed for cross-cutting of firewood. This document does not deal with hazards related to the combination of a single machine being used with any other machine (as part of a line). This document is not applicable to machines intended for use in potentially explosive atmospheres or to machines manufactured prior to the date of its publication.
Woodworking machines - Safety - Part 16: Table band saws and band re-saws (ISO 19085-16:2021)
- ICS
- 79.120.10
- CCS
- 发布
- 2021-11-17
- 实施
- 2022-02-28
This document gives the safety requirements and measures for numerically controlled (NC/CNC) boring machines, NC/CNC routing machines and NC/CNC boring and routing machines (as defined in 3.2, 3.3 and 3.4), capable of continuous production use, hereinafter referred to as "machines". This document deals with all significant hazards, hazardous situations and events, listed in Annex A, relevant to the machines when they are operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse. Also, transport, assembly, dismantling, disabling and scrapping phases have been taken into account. This document is also applicable to machines fitted with one or more of the following devices/additional working units, whose hazards have been dealt with: — additional working units for sawing, sanding, assembling or dowel inserting; — fixed or movable workpiece support; — mechanical, pneumatic, hydraulic or vacuum workpiece clamping; — automatic tool change devices. It is also applicable to machines fitted with edge-banding equipment, even if the relevant specific hazards have not been dealt with. NOTE For the risk assessment needed for the edge-banding equipment, ISO 19085-17 can be useful. Machines covered in this document are designed for workpieces consisting of: — solid wood; — material with similar physical characteristics to wood (see ISO 19085-1:2021, 3.2); — gypsum boards, gypsum bounded fibreboards, cardboard; — matrix engineered mineral boards, silicate boards; — composite materials with core consisting of polyurethane or mineral material laminated with light alloy; — polymer-matrix composite materials and reinforced thermoplastic/thermoset/elastomeric materials; — aluminium light alloy profiles; — aluminium light alloy plates with a maximum thickness of 10 mm; — composite boards made from the materials listed above. This document does not deal with specific hazards related to: — use of grinding wheels; — ejection through openings guarded by curtains on machines where the height of the opening in the enclosure above the workpiece support exceeds 700 mm; — ejection due to failure of milling tools with a cutting circle diameter equal to or greater than 16 mm and sawing tools not conforming to EN 847-1:2017 and EN 847-2:2017; — the combination of a single machine being used with other machines (as a part of a line); — integrated workpiece loading/unloading systems (e.g. robots). This document is not applicable to: — single spindle hand fed or integrated fed routing machines; — machines intended for use in potentially explosive atmosphere; — machines manufactured prior to its publication.
Woodworking machines — Safety — Part 3: Numerically controlled (NC/CNC) boring and routing machines
- ICS
- 79.120.10
- CCS
- 发布
- 2021-11-08
- 实施
Woodworking machines - Safety - Part 17: Edge banding machines fed by chains (ISO 19085-17:2021)
- ICS
- 79.120.10
- CCS
- 发布
- 2021-10-15
- 实施
- 2021-10-15
Woodworking machines — Safety — Part 14: Four-sided moulding machines
- ICS
- 79.120.10
- CCS
- 发布
- 2021-10-15
- 实施
Woodworking machines — Safety — Part 2: Horizontal beam panel circular sawing machines
- ICS
- 79.120.10
- CCS
- 发布
- 2021-10-14
- 实施
This document gives the safety requirements and measures for table band saws and band resaws, with manual loading and/or unloading and suitable for continuous production use, hereinafter referred to as “machines”. The machines are designed to cut solid wood and material with similar physical characteristics to wood. It deals with all significant hazards, hazardous situations and events, listed in Annex A, relevant to the machines, when operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer; reasonably foreseeable misuse has been considered too. Also, transport, assembly, dismantling, disabling and scrapping phases have been taken into account. It is also applicable to machines fitted with one or more of the following devices/additional working units, whose hazards have been dealt with: a) device to tilt the table; b) device to tilt the saw unit. This document does not apply to: 1) machines driven by combustion engines or power take offs (PTO); 2) log band sawing machines; NOTE Log band sawing machines are covered by EN 1807-2:2013. 3) horizontal band saws and band resaws; 4) machines designed for cross-cutting of firewood. This document does not deal with hazards related to the combination of a single machine being used with any other machine (as part of a line). This document is not applicable to machines intended for use in potentially explosive atmospheres or to machines manufactured prior to the date of its publication.
Woodworking machines — Safety — Part 16: Table band saws and band re-saws
- ICS
- 79.120.10
- CCS
- 发布
- 2021-10-08
- 实施
加工件宽度40m~1300m,厚度5mm~160m,长度不限; 送料速度3m/min~12m/min 安全性能高。
Floating special-shaped sander
- ICS
- 79.120.10
- CCS
- C201
- 发布
- 2021-08-27
- 实施
- 2021-08-27
Woodworking machines. Safety. Edge banding machines fed by chains
- ICS
- 79.120.10
- CCS
- J65
- 发布
- 2021-08-06
- 实施
- 2021-08-06
Woodworking machines – Safety – Part 17: Edge banding machines fed by chains
- ICS
- 79.120.10
- CCS
- 发布
- 2021-08-03
- 实施
- 2021-08-03
Woodworking machines – Safety – Part 17: Edge banding machines fed by chains (ISO 19085-17:2021)
- ICS
- 79.120.10
- CCS
- 发布
- 2021-08-03
- 实施
- 2021-08-03
Woodworking machines - Safety - Part 12: Tenoning/profiling machines (ISO 19085-12:2021)
- ICS
- 79.120.10
- CCS
- 发布
- 2021-07-15
- 实施
- 2021-07-15
本文件规定了数控钻孔机的主参数、要求、检验规则及标志、包装、贮存。
Wood processing machinery CNC drilling machine
- ICS
- 79.120.10
- CCS
- B97
- 发布
- 2021-07-08
- 实施
- 2021-09-01
本文件规定了双推手数控裁板锯的术语和定义、参数、要求、检验方法、检验规则及标志、包装、随机文件、运输、储存。
Wood processing machinery double pusher CNC panel saw
- ICS
- 79.120.10
- CCS
- B97
- 发布
- 2021-07-08
- 实施
- 2021-09-01
Woodworking machines - Safety - Part 17: Edge banding machines fed by chains (ISO 19085-17:2021)
- ICS
- 79.120.10
- CCS
- 发布
- 2021-07-00
- 实施
This International Standard is applicable to woodworking machines with cutting tools and/or sanding tools as defined in 3.1 when they are used as intended and under the conditions foreseen by the manufacturer. This document contains the safety requirements and measures to reduce
Woodworking machines - Safety - Part 1: Common requirements (ISO 19085-1:2021); German version EN ISO 19085-1:2021
- ICS
- 79.120.10
- CCS
- 发布
- 2021-07-00
- 实施
Woodworking machines - Safety - Part 16: Table band saws and band re-saws (ISO/FDIS 19085-16:2021)
- ICS
- 79.120.10
- CCS
- 发布
- 2021-05-00
- 实施
