81.060.30 高级陶瓷 标准查询与下载
共找到 1685 条与 高级陶瓷 相关的标准，共 113 页
Fine ceramics (advanced ceramics, advanced technical ceramics) - Ceramic composites - Notations and symbols (ISO 19634:2017)
- ICS
- 81.060.30
- CCS
- 发布
- 2021-09-30
- 实施
- 2021-09-30
本文件规定了水泥粉磨用耐磨氧化铝陶瓷研磨体(以下简称研磨体)的产品分类、规格和标记，技术要求，试验方法，检验规则以及标志、包装、运输和贮存。 本文件适用于水泥粉磨用耐磨氧化铝陶瓷研磨体，其他陶瓷研磨体在本领域的应用也可参照执行。
Wear-resistant alumina ceramic grinding body for cement milling
- ICS
- 81.060.30
- CCS
- B109
- 发布
- 2021-09-23
- 实施
- 2022-09-16
Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for air-purification performance of semiconducting photocatalytic materials - Part 4 : removal of formaldehyde
- ICS
- 81.060.30
- CCS
- Q32
- 发布
- 2021-09-11
- 实施
- 2021-09-11
Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for air-purification performance of semiconducting photocatalytic materials - Part 5 : removal of methyl mercaptan
- ICS
- 81.060.30
- CCS
- Q32
- 发布
- 2021-09-11
- 实施
- 2021-09-11
本文件规定了建耐磨氧化铝陶瓷“领跑者”标准评价的评价指标体系、评价方法及等级划分。 本文件适用于建材行业使用的耐磨氧化铝陶瓷研磨体、耐磨氧化铝陶瓷耐磨体（衬砖，板，管等）产品企业标准水平的评价。相关机构在制定企业标准“领跑者”评估方案时可参照使用本文件，企业在制定企业标准时也可参照使用。
Assessment requirements for forerunner standard—Wear resisting alumina ceramics
- ICS
- 81.060.30
- CCS
- C301
- 发布
- 2021-09-10
- 实施
- 2022-03-29
本文件规定了氧化锆日用陶瓷刀“领跑者”标准评价的评价指标体系、评价方法及等级划分。 本文件适用于氧化锆日用陶瓷刀的企业标准水平评价。相关机构在制定企业标准 “领跑者”评估方案时可考虑使用本文件。企业或相关机构在制定企业标准时可参照使用。
Assessment requirements for forerunner standards—Zirconia ceramic knife
- ICS
- 81.060.30
- CCS
- C301
- 发布
- 2021-09-10
- 实施
- 2022-03-29
Fine ceramics (advanced ceramics, advanced technical ceramics) - Ceramic composites - Notations and symbols
- ICS
- 81.060.30
- CCS
- 发布
- 2021-09-09
- 实施
- 2021-09-09
Fine ceramics (advanced ceramics, advanced technical ceramics) - Methods of test for reinforcements - Determination of tensile properties of filaments at ambient temperature
- ICS
- 81.060.30
- CCS
- 发布
- 2021-09-09
- 实施
- 2021-09-09
Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at ambient temperature in air atmospheric pressure - Determination of tensile properties of tubes
- ICS
- 81.060.30
- CCS
- 发布
- 2021-09-09
- 实施
- 2021-09-09
Fine ceramics (advanced ceramics, advanced technical ceramics). Methods for chemical analysis of zirconium oxide powders
- ICS
- 81.060.30
- CCS
- 发布
- 2021-09-08
- 实施
- 2021-09-08
This document specifies the conditions for the determination of tensile properties of single filaments of ceramic fibre such as tensile strength, Young modulus and fracture strain. The method applies to continuous ceramic filaments taken from tows, yarns, braids and knittings, wh
Fine ceramics (advanced ceramics, advanced technical ceramics) - Methods of test for reinforcements - Determination of tensile properties of filaments at ambient temperature (ISO 19630:2017); German version EN ISO 19630:2021
- ICS
- 81.060.30
- CCS
- 发布
- 2021-09-00
- 实施
This document defines the symbols to be used to represent physical, mechanical and thermal characteristics, as determined by methods described in relevant ISO publications, for ceramic matrix composites. It is aimed at avoiding confusion in reporting measurements and characterist
Fine ceramics (advanced ceramics, advanced technical ceramics) - Ceramic composites - Notations and symbols (ISO 19634:2017); German version EN ISO 19634:2021
- ICS
- 81.060.30
- CCS
- 发布
- 2021-09-00
- 实施
1 Scope This document specifies the conditions for the determination of tensile properties of ceramic matrix composite tubes with continuous fibre-reinforcement at ambient temperature in air atmospheric pressure. This document is specific to the tubular geometries since fibre architecture and specimen geometry factors are distinctly different in composite tubes than in flat specimens. This document provides information on the uniaxial tensile properties and tensile stress -strain response such as tensile strength and strain, tensile elastic modulus and Poisson’s ratio . The information may be used for material development, control of manufacturing (quality insurance), material comparison, characterization, reliability and design data generation for tubular components. This document addresses, but is not restricted to, various suggested test piece fabrication methods. It applies primarily to ceramic and/or glass matrix composite tubes with a continuous fibrous-reinforcement: unidirectional (1D filament winding and tape lay-up), bi-directional (2D braid and weave) and tri-directional (xD, with 2 < x < 3), loaded along the tube axis. Values expressed in this document are in accordance with the International System of Units (SI). NOTE In most cases, ceramic matrix composites to be used at high temperature in air are coated with an antioxidation coating.
Fine ceramics (advanced ceramics, advanced technical ceramics). Mechanical properties of ceramic composites at ambient temperature in air atmospheric pressure. Determination of tensile properties of tubes
- ICS
- 81.060.30
- CCS
- 发布
- 2021-08-31
- 实施
- 2021-08-31
This document specifies methods for the chemical analysis of zirconium oxide powders used as the raw material for fine ceramics. It stipulates the determination methods of the zirconium, aluminium, barium, calcium, cerium, cobalt, gadolinium, hafnium, iron, magnesium, potassium, silicon, sodium, strontium, titanium and yttrium contents in zirconium oxide powders for fine ceramics. The test sample is decomposed by acid pressure decomposition or alkali fusion. Contents of zirconium and yttrium are determined by using either a precipitation and gravimetric method or an inductively coupled plasma–optical emission spectrometry (ICP–OES) method. Contents of aluminium, barium, calcium, cerium, cobalt, gadolinium, hafnium, iron, magnesium, potassium, silicon, sodium, strontium and titanium are determined by using an ICP–OES method.
Fine ceramics (advanced ceramics, advanced technical ceramics) — Methods for chemical analysis of zirconium oxide powders
- ICS
- 81.060.30
- CCS
- 发布
- 2021-08-31
- 实施
1 Scope This document specifies the conditions for the determination of tensile properties of single filaments of ceramic fibre such as tensile strength , Young modulus and fracture strain . The method applies to continuous ceramic filaments taken from tows, yarns, braids and knittings, which have strain to fracture less than or equal to 5 %. The method does not apply to carbon fibres that exhibit nonlinear stress- strain curve. The method does not apply to checking the homogeneity of strength properties of fibres, nor to assessing the effects of volume under stress. Statistical aspects of filament failure are not included.
Fine ceramics (advanced ceramics, advanced technical ceramics). Methods of test for reinforcements. Determination of tensile properties of filaments at ambient temperature
- ICS
- 81.060.30
- CCS
- 发布
- 2021-08-31
- 实施
- 2021-08-31
Fine ceramics (advanced ceramics, advanced technical ceramics). Methods for evaluating wear and friction characteristics of fine ceramic thin films under dry and humid conditions
- ICS
- 81.060.30
- CCS
- 发布
- 2021-08-27
- 实施
- 2021-08-27
This document specifies a method for testing the wear resistance and friction coefficient for fine ceramic thin films in dry and high-humidity environments, where such films have a thickness of up to approximately 1 µm and are deposited on a substrate or a base, including a thin substrate or a very thin organic polymer film base.
Fine ceramics (advanced ceramics, advanced technical ceramics) — Methods for evaluating wear and friction characteristics of fine ceramic thin films under dry and humid conditions
- ICS
- 81.060.30
- CCS
- 发布
- 2021-08-24
- 实施
Fine ceramics (advanced ceramics, advanced technical ceramics)--Test method for linear thermal expansion of monolithic ceramics by push-rod technique (ISO 17562:2016)
- ICS
- 81.060.30
- CCS
- 发布
- 2021-08-23
- 实施
- 2021-08-23
Fine ceramics (advanced ceramics, advanced technical ceramics)--Thermophysical properties of ceramic composites--Determination of specific heat capacity (ISO 19628:2017)
- ICS
- 81.060.30
- CCS
- 发布
- 2021-08-23
- 实施
- 2021-08-23
Fine ceramics (advanced ceramics, advanced technical ceramics) - Ceramic composites - Notations and symbols (ISO 19634:2017)
- ICS
- 81.060.30
- CCS
- 发布
- 2021-08-00
- 实施
- 2021-08-01
