81.060.30 高级陶瓷 标准查询与下载

ISO/DIS 5618-1:2023 精细陶瓷（先进陶瓷、先进技术陶瓷） GaN晶体表面缺陷测试方法 第1部分：第1部分：缺陷分类

Fine ceramics (advanced ceramics, advanced technical ceramics) --Test method for GaN crystal surface defects — Part 1: Part 1: Classification of defects

ISO/CD TS 6857:2023 精细陶瓷（先进陶瓷、先进技术陶瓷） 陶瓷复合材料的物理性能 通过图像分析测定抛光横截面中的空隙和纤维含量的指南

Fine ceramics (advanced ceramics, advanced technical ceramics) — Physical properties of ceramic composites — Guidelines for determination of void and fiber contents in polished cross section by image analysis

ISO/CD 5770:2023 精细陶瓷（先进陶瓷、先进技术陶瓷）陶瓷涂层导热系数测定的相关方法

Fine ceramics (advanced ceramics, advanced technical ceramics) — Relative method for determining thermal conductivity of ceramic coatings

ISO 3180:2023 精细陶瓷（先进陶瓷、先进技术陶瓷） 非生物医学应用磷酸钙基粉末的化学分析方法

Fine ceramics (advanced ceramics, advanced technical ceramics) — Methods for chemical analysis of calcium-phosphate-based powders for non-biomedical applications

ISO/CD 6223:2023 精细陶瓷（先进陶瓷、先进技术陶瓷）-利用循环气流光反应器进行原位 FTIR 光谱分析的光催化建筑/建筑材料空气净化性能的测试方法；气态甲苯

Fine Ceramics (advanced ceramics, advanced technical ceramics)- Test method for air purification performance of photocatalytic building/construction materials by an in-situ FTIR spectra analysis with a recirculating air flow photoreactor ; Gaseous Toluene

BS EN ISO 17092:2023 精细陶瓷（先进陶瓷、先进技术陶瓷） 整体陶瓷在酸、碱溶液中耐腐蚀性能的测定

1   Scope This International Standard describes the test method for determining the corrosion resistance of fine ceramics in acid and alkaline solutions, such as sulfuric acid and sodium hydroxide. This International Standard is designed to provide an assessment of the mass changes and dimensional changes of test specimens following the corrosion test immersed in the corrosive liquids, and to assess whether corrosion has a significant effect on the subsequent strength. This test method may be used for development of materials, quality control, characterization, and design-data generation purposes. NOTE The units and numerical values given in { } in this standard are based on traditional units and are appended for information.

Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of corrosion resistance of monolithic ceramics in acid and alkaline solutions

BS EN ISO 17947:2023 精细陶瓷（先进陶瓷、先进技术陶瓷） 氮化硅细粉的化学分析方法

1   Scope This International Standard specifies the methods for the chemical analysis of fine silicon nitride powders used as the raw material for fine ceramics. This International Standard stipulates the determination methods of total silicon, total nitrogen, aluminium, iron, calcium, oxygen, carbon, fluorine, and chlorine in fine silicon nitride powders.

Fine ceramics (advanced ceramics, advanced technical ceramics). Methods for chemical analysis of fine silicon nitride powders

BS ISO 24687:2023 精细陶瓷（先进陶瓷、先进技术陶瓷） 常温和高温下块状热电材料的塞贝克系数和电导率测量

1   Scope This document specifies the measurement methods for the electronic transport properties of bulk-type thermoelectric materials at room and elevated temperatures. The measurement methods cover the simultaneous determination of Seebeck coefficient and electrical conductivity of bulk-type thermoelectric materials in a temperature range from 300 K to 1 200 K. The measurement methods are applicable to bulk-type thermoelectric materials used for power generation, energy harvesting, cooling and heating, among other things.

Fine ceramics (advanced ceramics, advanced technical ceramics). Measurement of Seebeck coefficient and electrical conductivity of bulk-type thermoelectric materials at room and high temperatures

BS EN ISO 24370:2023 精细陶瓷（先进陶瓷、先进技术陶瓷） 人字形缺口梁（CNB）法测定整体陶瓷室温断裂韧性的试验方法

1   Scope This International Standard specifies a test method for determining the fracture toughness of monolithic ceramic materials at room temperature by the chevron-notched beam (CNB) method. This International Standard is applicable to monolithic ceramics and whisker- or particulate-reinforced ceramics that are regarded as macroscopically homogeneous. It is not applicable to continuous-fibre reinforced ceramic composites. This International Standard is usually applicable to ceramic materials with a fracture toughness less than about 12 MPa(m 1/2 ). The test method is applicable to materials with a flat crack-growth resistance curve and may be applicable to materials with a rising crack-growth resistance curve (R-curve).

Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for fracture toughness of monolithic ceramics at room temperature by chevron-notched beam (CNB) method

BS EN ISO 20509:2023 精细陶瓷（先进陶瓷、先进技术陶瓷） 非氧化物整体陶瓷抗氧化性的测定

This International Standard describes the method of test for determining the oxidation resistance of non-oxide monolithic ceramics, such as silicon nitride, Sialon1) and silicon carbide at high temperatures. This International Standard is intended to provide an assessment of the mass and dimensional changes of test pieces following oxidation at high temperature in an oxidizing atmosphere, and to assess whether oxidation has a significant effect on the subsequent strength. This test method may be used for materials development, quality control, characterization, and design data generation purposes.

Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of oxidation resistance of nonoxide monolithic ceramics

23/30461942 DC BS ISO 19606 精细陶瓷（高级陶瓷、先进技术陶瓷） 用原子力显微镜测定精细陶瓷薄膜表面粗糙度的方法

BS ISO 19606. Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for surface roughness of fine ceramic films by atomic force microscopy

T/CSTM 00695-2023 室内空气环境治理工程验收规范

本文件规定了民用建筑室内空气环境治理工程的验收基本要求、室内空气质量验收要求、验收作业流程、室内空气采样、检验方法、验收判定规则、记录和验收报告。 本文件适用于室内空气环境治理工程质量的验收。

Acceptance specification for indoor air environment treatment project

23/30438675 DC BS ISO 5618-1 精细陶瓷（先进陶瓷、先进技术陶瓷） GaN晶体表面缺陷的测试方法 第1部分：缺陷的分类

BS ISO 5618-1. Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for GaN crystal surface defects - Part 1. Classification of defects

ISO/FDIS 26443:2023 精细陶瓷（先进陶瓷、先进技术陶瓷） 评价陶瓷涂层附着力的洛氏压痕试验

Fine ceramics (advanced ceramics, advanced technical ceramics) — Rockwell indentation test for evaluation of adhesion of ceramic coatings

ISO 24687:2023 精细陶瓷（先进陶瓷、先进技术陶瓷） 室温和高温下块状热电材料塞贝克系数和电导率的测量

This document specifies the measurement methods for the electronic transport properties of bulk- type thermoelectric materials at room and elevated temperatures. The measurement methods cover the simultaneous determination of Seebeck coefficient and electrical conductivity of bulk-type thermoelectric materials in a temperature range from 300 K to 1200 K. The measurement methods are applicable to bulk-type thermoelectric materials used for power generation, energy harvesting, cooling and heating, among other things.

Fine ceramics (advanced ceramics, advanced technical ceramics) — Measurement of Seebeck coefficient and electrical conductivity of bulk-type thermoelectric materials at room and high temperatures

BS ISO 5722:2023 精细陶瓷（先进陶瓷、先进技术陶瓷） 测定陶瓷粘合剂拉伸和剪切蠕变的试验方法

1   Scope This document specifies a testing method for determining the tensile and shear creep of ceramic adhesive at ambient temperature by tensile and shear tests on cross-bonded test specimens. Procedures for test piece preparation, test modes, data collection, creep calculations and reporting are addressed. This document is applicable primarily to ceramic materials which are used for ceramic-ceramic, ceramic-metal and ceramic-glass joining, including monolithic fine ceramics and whisker- or particulate-reinforced ceramic composites. This test method can be used for material research, quality control, characterization and design data generation purposes.

Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for determining tensile and shear creep of ceramic adhesive

EN ISO 17947:2023 精细陶瓷(高级陶瓷, 高级工业陶瓷). 氮化硅细粉的化学分析方法

This document specifies the methods for the chemical analysis of fine silicon nitride powders used as the raw material for fine ceramics. It stipulates the determination methods of total silicon, total nitrogen, aluminium, iron, calcium, oxygen, carbon, fluorine, and chlorine in fine silicon nitride powders.

Fine ceramics (advanced ceramics, advanced technical ceramics) - Methods for chemical analysis of fine silicon nitride powders (ISO 17947:2014)

EN ISO 20509:2023 细陶瓷(高级陶瓷、高级工业陶瓷).非氧化块体陶瓷的抗氧化性测定

ISO 20509:2003 describes the method of test for determining the oxidation resistance of non-oxide monolithic ceramics, such as silicon nitride, sialon and silicon carbide at high temperatures. This International Standard is designed to provide an assessment of the mass and dimensional changes of test pieces following oxidation at high temperature in an oxidizing atmosphere, and to assess whether oxidation has a significant effect on the subsequent strength. This test method may be used for materials development, quality control, characterization, and design data generation purposes.

Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of oxidation resistance of non-oxide monolithic ceramics (ISO 20509:2003)

EN ISO 17092:2023 精密瓷器(高级瓷器、高级工业瓷器).在酸碱溶液中单块陶瓷耐腐蚀性的测定

ISO 17092:2005 describes the test method for determining the corrosion resistance of fine ceramics in acid and alkaline solutions, such as sulfuric acid and sodium hydroxide. This International Standard is designed to provide an assessment of the mass changes and dimensional changes of test specimens following the corrosion test immersed in the corrosive liquids, and to assess whether corrosion has a significant effect on the subsequent strength. This test method may be used for development of materials, quality control, characterization, and design-data generation purposes.

Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of corrosion resistance of monolithic ceramics in acid and alkaline solutions (ISO 17092:2005)

EN ISO 24370:2023 细陶瓷(高级陶瓷、高级工业陶瓷).室温下用锯齿形切口试杆(CNB)法测定单片陶瓷断裂韧性的试验方法

ISO 24370:2005 specifies a test method for determining the fracture toughness of monolithic ceramic materials at room temperature by the chevron-notched beam (CNB) method. ISO 24370:2005 is applicable to monolithic ceramics and whisker- or particulate-reinforced ceramics that are regarded as macroscopically homogeneous. It is not applicable to continuous-fibre reinforced ceramic composites. ISO 24370:2005 is usually applicable to ceramic materials with a fracture toughness less than about 12 megapascal(square root metre). The test method is applicable to materials with a flat crack-growth resistance curve and may be applicable to materials with a rising crack-growth resistance curve (R-curve).

Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for fracture toughness of monolithic ceramics at room temperature by chevron-notched beam (CNB) method (ISO 24370:2005)