83.040.20 (Rubber compounding ingredients) 标准查询与下载

ASTM D1506-99(2007) 炭黑的标准测试方法.灰分含量

The ash content of a carbon black is the amount of non-carbon components present after combustion. Primary contributants to ash are the manufacturing process water and the catalyst in the feedstock. 1.1 These test methods cover the determination of the ash content of carbon black.1.2The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific precautionary statements see Sections 6 and 13.

Standard Test Methods for Carbon Black-Ash Content

ASTM D3324-99 炭黑的标准实施规程.用ASTM标准炭黑改进检验再生性

1.1 This practice provides a statistical procedure for improving test reproducibility when a laboratory cannot physically calibrate its apparatus to obtain the standard values of the ASTM reference blacks, within the ranges given in the precision statement of the test method concerned. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Carbon Black8212;Improving Test Reproducibility Using ASTM Standard Reference Blacks

ASTM D1618-99(2011) 炭黑可萃取性的标准试验方法 甲苯萃取物的透射系数

The toluene discoloration value provides an estimate of toluene-soluble discoloring residues present on the carbon black.1.1 This test method covers the measurement of the degree of toluene discoloration by carbon black extractables and is useful in controlling the reaction processes for production of carbon black. This test method may not be applicable to carbon blacks with high extractables.1.2 The values stated in SI units are to be regarded as standard.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Carbon Black ExtractablesTransmittance of Toluene Extract

ASTM D1506-99(2013) 炭黑的标准试验方法.灰分含量

4.1 The ash content of a carbon black is the amount of non-carbon components present after combustion. Primary contributants to ash are the manufacturing process water and the catalyst in the feedstock. 1.1 These test methods cover the determination of the ash content of carbon black. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific precautionary statements see Sections 6 and 13.

Standard Test Methods for Carbon Blackmdash;Ash Content

ASTM D3313-99 炭黑的试验方法.单个炭黑片抗碎强度

1.1 This standard describes a method for measuring the crush strength of individual pellets of carbon black. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Carbon Black-Individual Pellet Hardness

ASTM D1513-99ae1 丸状炭黑的标准测试方法.倾注密度

1.1 This test method covers the determination of the pour density of pelleted carbon blacks. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Carbon Black, Pelleted-Pour Density

ASTM D1506-99 炭黑的标准测试方法.灰分含量

1.1 These test methods cover the determination of the ash content of carbon black. 1.2 The values stated in SI units are to be regarded as the standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific precautionary statements see Sections 6 and 13.

Standard Test Methods for Carbon Black-Ash Content

ASTM D1513-99a(2004) 颗粒状炭黑的标准试验方法.顷注密度

1.1 This test method covers the determination of the pour density of pelleted carbon blacks.1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Carbon Black, Pelleted8212;Pour Density

ASTM D3765-99 碳黑-十六烷基三甲溴化铵表面积的试验方法

1.1 This test method covers the measurement of the specific surface area of carbon black exclusive of area contained in micropores too small to admit hexadecyltrimethylammonium bromide (cetyltrimethylammonium bromide, commonly referred to as CTAB) molecules. This test method is suitable for characterizing rubber-grade carbon blacks of all types. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Carbon Black-CTAB (Cetyltrimethylammonium Bromide) Surface Area

ASTM D1508-99 炭黑 颗粒和磨损的标准试验方法

1.1 This test method covers the determination of the fines and attrition of pelleted carbon black.1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Carbon Black, Pelleted-Fines and Attrition

ASTM D2007-98 粘土凝胶吸附色谱法测定橡胶增量剂和作业油及其他石油衍生油中特性基团的标准试验方法

1.1 This test method covers a procedure for classifying oil samples of initial boiling point of at least 260716;C (500176;F) into the hydrocarbon types of polar compounds, aromatics and saturates, and recovery of representative fractions of these types. This classification is used for specification purposes in rubber extender and processing oils. Note 18212;See Test Method D 2226.1.2 This test method is not directly applicable to oils of greater than 0.1 mass % pentane insolubles. Such oils can be analyzed after removal of these materials, but precision is degraded (See Appendix X1).1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific precaution statements are given in 6.1, Section 7, A1.4.1, and A1.5.5.

Standard Test Method for Characteristic Groups in Rubber Extender and Processing Oils and Other Petroleum-Derived Oils by the Clay8212;Gel Absorption Chromatographic Method

ASTM D4573-98 橡胶加工用化学药品的标准试验方法.测定被油浸过的硫磺中的含油量

1.1 This test method covers the determination of the amount of hydrocarbon oils added to oil-treated sulfurs. The test method is employed when the amount of oil added is 1% or more of the total sample. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Rubber Chemicals-Determination of Oil Content in Oil-Treated Sulfur

ASTM D1937-98e1 颗粒碳黑的标准试验方法.质量强度

1.1 This test method covers the determination of the mass strength of pelleted carbon black. It is designed to determine the mass strength of a cylindrical column of pelleted carbon black. The results of this test are believed to relate to the ability of the carbon black to flow in bulk handling systems.1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Carbon Black, Pelleted8212;Mass Strength

ASTM D1817-96 橡胶化学品的标准试验方法.密度

1.1 This test method covers the determination of the density of solid chemicals used as rubber additives during processing and manufacture. It is intended for determining the density of the rubber chemical itself and not for the determination of the effective density of the chemical in a rubber. 1.2 The values stated in SI units shall be regarded as standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Rubber Chemicals8212;Density

ASTM D4122-96ae1 炭黑的标准操作规程.工业标准炭黑的评定

1.1 This practice offers guidelines for the production and testing for uniformity of a lot of carbon black to be used as an Industry Reference Black (IRB). 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Carbon Black-Evaluation of an Industry Reference Black

ASTM D3156-96(2005) 橡胶的标准实施规程.防降解剂(防氧化剂、防臭氧剂及稳定剂)的色谱分析

This practice is useful for the examination of rubber compounds or products for the presence of chemicals that prevent or greatly reduce degradation due to oxygen, ozone, or other agents. This practice is suitable for quality assurance, factory control, and research and development applications.1.1 This practice covers the detection and identification by thin-layer chromatography of antidegradants (antioxidants, antiozonants, and stabilizers) that may be present in raw rubber or rubber products. Analysis for other types of antidegradants is possible as long as the requirements of the practice are met.1.2 The values stated in SI units are to be regarded as the standard.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Rubber8212;Chromatographic Analysis of Antidegradants (Antioxidants, Antiozonants and Stabilizers)

ASTM D1766-96 橡胶化学制品的标准试验方法.溶解性

1.1 This test method covers a practical test for the solubility of commercial chemicals used in rubber products. 1.2 It is not a true measure of solubility, since equilibrium is not approached from both sides, that is, higher temperature and lower temperature. 1.3 The test method indicates the total solubility, under the conditions of the test, of all components in the presence of each other and in the proportions present in the sample. 1.4 This test method does not measure the solubility of a rubber chemical in rubber. 1.5 The values stated in SI units are to be considered standard. 1.6 This standard does not purport to address the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Rubber Chemicals8212;Solubility

ASTM D3156-96(2011) 橡胶标准操作规程.防降解剂(稳定剂,防氧化剂及防臭氧剂及稳定剂)的色谱分析

This practice is useful for the examination of rubber compounds or products for the presence of chemicals that prevent or greatly reduce degradation due to oxygen, ozone, or other agents. This practice is suitable for quality assurance, factory control, and research and development applications.1.1 This practice covers the detection and identification by thin-layer chromatography of antidegradants (antioxidants, antiozonants, and stabilizers) that may be present in raw rubber or rubber products. Analysis for other types of antidegradants is possible as long as the requirements of the practice are met. 1.2 The values stated in SI units are to be regarded as the standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Rubbermdash;Chromatographic Analysis of Antidegradants (Antioxidants, Antiozonants and Stabilizers)

ASTM D2663-95a(2006) 炭黑的标准试验方法.橡胶中的扩散性

1.1 These test methods determine the degree of dispersion of carbon black in rubber. Three test methods are described as follows: SectionsTest Method A-Visual InspectionTest Method B-Agglomerate CountTest Method C-Microroughness Measurement1.2 The values stated in SI units are to be regarded as the standard. The values in parentheses are for information only.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Methods for Carbon Black-Dispersion in Rubber

ASTM D2663-95a(2000)e1 橡胶中碳黑分散度的标准试验方法

1.1 These test methods determine the degree of dispersion of carbon black in rubber. Three test methods are described as follows: SectionsTest Method A-Visual InspectionTest Method B-Agglomerate CountTest Method C-Microroughness Measurement1.2 The values stated in SI units are to be regarded as the standard. The values in parentheses are for information only.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Methods for Carbon Black-Dispersion in Rubber