83.160.99 标准查询与下载

KS M ISO 4250-1-2021 地球摩天轮胎和轮辋 - 第1部分:轮胎指定和尺寸

Earth-mover tyres and rims —Part 1: Tyre designation and dimensions

KS M ISO 4250-1:2021 地球摩天轮胎和轮辋 - 第1部分:轮胎指定和尺寸

Earth-mover tyres and rims —Part 1: Tyre designation and dimensions

KS M ISO 4250-2:2021 土方机械轮胎和轮辋.第2部分:负载和充气压力

Earth-mover tyres and rims —Part 2: Loads and inflation pressures

KS M 6751-2021 橡胶轮胎工业车辆和越野服务

Rubber tires for industrial vehicles and off the road service

KS M 6754-2021 非充气轮胎用聚氨酯弹性材料试验方法

Testing methods for polyurethane elastomeric materials of non-pneumatic tire

ISO 18808:2021 工程机械用农用轮胎

This document specifies the designation, dimensions, approved rim contours, load ratings and reference speeds for agricultural tyres fitted to construction machines (e.g. backhoe loaders, small dumpers, loaders, excavators) operating on building sites under loading and transport conditions. Tyres conforming to this document are identified by the suffix IND in the tyre size designation; code designated tyres can alternatively, in place of the suffix IND, be identified by the classification code R-4. NOTE Agricultural tyres without the suffix IND in the tyre size designation or with a classification code differing from “R-4” are not part of this document. Code designated diagonal tyres (ply rating marked series) for agricultural tractors, trailers and machines are part of ISO 4251-1 and ISO 4251-2. Code designated radial tyres for agricultural tractors, trailers and machines are part of ISO 8664. Metric designated tyres for agricultural tractors, trailers and machines are part of ISO 7867-2. Tyres for forestry machines, identified by suffix LS, or classification code LS-x are part of ISO 18807.

Agricultural tyres for construction machines

T/ZZB 1970-2020 电动平衡车轮胎

本文件规定了电动平衡车轮胎的产品分类、基本要求、技术要求、试验方法、检验规则、标志、包装、运输、贮存和质量承诺。 本文件适用于电动平衡车的充气外胎。

Electric balancing car tires

KS M ISO 3739-1-2019 工业轮胎和轮辋 第1部分：5°锥形或平底轮辋上的充气轮胎（公制系列） 名称、尺寸和标记

Industrial tyres and rims－Part 1：Pneumatic tyres(metric series) on 5° tapered or flat base rims－Designation, dimensions and marking

BS ISO 10499-1:2019 工业轮胎和轮辋 充气轮胎轮辋用橡胶实心轮胎（公制系列） 名称、尺寸和标记

What is ISO 10499-1 – Industrial tyres and rims about?   ISO 10499-1 is the first part of the multi-series standard that specifies the designation, dimensions and markings requirement for industrial tyres and rims.   ISO 10499-1 specifies the main requirements, including designations, dimensions and markings, of the metric series of rubber solid tyres for pneumatic tyre rims primarily intended for industrial machines for use on prepared surfaces.   Rim contours fitting these tyres are specified in ISO 3739-1 and

Industrial tyres and rims. Rubber solid tyres (metric series) for pneumatic tyre rims - Designation, dimensions and marking

ISO 10499-1:2019 工业轮胎和轮辋.充气轮胎轮辋用橡胶实心轮胎（米制系列）.第1部分:名称、尺寸和标记

This document specifies the main requirements, including designations, dimensions and markings, of the metric series of rubber solid tyres for pneumatic tyre rims primarily intended for industrial machines for use on prepared surfaces. Rim contours fitting these tyres are specified in ISO 3739-1 and ISO 3739-3.

Industrial tyres and rims — Rubber solid tyres (metric series) for pneumatic tyre rims — Part 1: Designation, dimensions and marking

ISO 4250-1:2017 土方机械轮胎和轮辋.第1部分:轮胎命名和尺寸规格

This document specifies designations and dimensions for earth-mover tyres and gives the recommended rims primarily intended for earth-moving machinery as defined in ISO 6165. and dimensions of tyres and rims for earth-movers; it also gives load tables for these tyres.

Earth-mover tyres and rims - Part 1: Tyre designation and dimensions

ISO 4250-2:2017 地球动力轮​​胎和轮辋 - 第2部分:负载和通货膨胀压力

tyres and rims for earth-movers; it also gives load tables for these tyres. This document gives working definitions of masses and load cycles and specifies tyre loads and reference inflation pressures for narrow- and wide-base tyres primarily intended for earth-mover machines.

Earth-mover tyres and rims — Part 2: Loads and inflation pressures

KS M ISO 4250-1:2015 地球摩天轮胎和轮辋 第1部分：轮胎指定和尺寸

Earth-mover tyres and rims－Part 1：Tyre designation and dimensions

KS M ISO 4250-2:2015 土方机械轮胎和轮辋 第2部分：负载和充气压力

Earth-mover tyres and rims－Part 2：Loads and inflation pressures

GSO ISO 10499-2:2015 工业轮胎和套圈 充气轮胎套圈用实心橡胶轮胎（公制系列） 第2部分：额定载荷

This part of ISO 10499 specifies the load ratings of the metric series of rubber solid tyres for pneumatic tyre rims primarily intended for industrial vehicles for use on prepared surfaces. Designation, dimensions and marking are covered in ISO 10499-1; rim contours fitting these tyres are specified in ISO 3739-3..

Industrial tyres and rims -- Rubber solid tyres (metric series) for pneumatic tyre rims -- Part 2: Load ratings

GSO ISO 13442:2014 建筑设备轮胎和轴环

This International Standard sets the designation, dimensions, load ratings and reference speeds for tyres and rims fitted to construction machines (backhoe loaders, small dumpers, loaders, excavators, etc.) operating on building sites under loading and transport conditions.

Tyres and rims for construction machines

NF E59-002-2:2014 土方机械用轮胎和轮辋. 第2部分: 负载和膨胀压力

La présente Norme internationale se compose de trois parties et rassemble les éléments techniques relatifs à la désignation et aux cotes des pneumatiques et jantes pour engins de terrassement; elle présente également les tableaux de charge pour ces types de pneumatiques.

Earth-mover tyres and rims - Part 2 : loads and inflation pressures

NF E59-002-1:2014 土方机械用轮胎和轮辋. 第1部分: 轮胎命名和尺寸

La présente Norme internationale se compose de trois parties et rassemble les éléments techniques relatifs à la désignation et aux cotes des pneumatiques et jantes pour engins de terrassement; elle présente également les tableaux de charge pour ces types de pneumatiques.

Earth-mover tyres and rims - Part 1 : tyre designation and dimensions

KS M 6754-2014 非充气轮胎用聚氨酯弹性体材料试验方法

이 표준은 구조적으로 차량의 하중을 지탱하여 공기의 주입이 없이 타이어의 기능을 발휘할 수 있는 타이어(비공기입식 타이어)용 소재로 사용되는 우레탄계 탄성체의 물리적 시험방법에 대하여 규정한다. 단, 한계속도가 150 km/h 미만인 승용차용 타이어 소재의 경우에만 적용한다.?

Testing methods for polyurethane elastomeric materials of non-pneumatic tire

GSO ISO 4250-1:2013 道路工程设备轮胎和套环 第1部分：轮胎尺寸和标记

ISO 4250 consists of three parts (see the Foreword) laying down the technical elements relating to designation and dimensions of tyres and rims for earth-movers; it also gives load tables for these tyres. This part of ISO 4250 specifies designations and dimensions for earth-mover tyres, and gives the recommended rims primarily intended for earth-moving machinery as defined in ISO 6165.

Earth-mover tyres and rims -- Part 1: Tyre designation and dimensions