83.160.99 标准查询与下载

ISO 3739-1:2007 工业轮胎和轮辋.第1部分:5°锥形轮辋或平面轮辋的充气轮胎(米制系列).名称与符号、尺寸和作标记

This part of ISO 3739 specifies the main requirements of the metric series of pneumatic tyres primarily intended for industrial vehicles, including designations, dimensions and markings. The tyres are based on the following parameters: speeds not exceeding 50 km/h; use on 5° tapered or flat base rims. The conversion of code-designated industrial tyres into metric-designated tyres is outside the scope of this part of ISO 3739.

Industrial tyres and rims - Part 1: Pneumatic tyres (metric series) on 5° tapered or flat base rims - Designation, dimensions and marking

BS ISO 4250-1:2006 土方机械轮胎和轮辋 第1部分:轮胎符号、规格和尺寸

ISO 4250 consists of three parts (see the Foreword) laying down the technical elements relating to designation and dimensions of tyres and rims for earth-movers; it also gives load tables for these tyres. This part of ISO 4250 specifies designations and dimensions for earth-mover tyres, and gives the recommended rims primarily intended for earth-moving machinery as defined in ISO 6165.

Earth-mover tyres and rims - Tyre designation and dimensions

BS ISO 4250-2:2006 土方机械轮胎和轮辋.载重和充气压力

ISO 4250 consists of three parts (see the Foreword) laying down the technical designation and dimensions of tyres and rims for earth-movers; it also gives load tables for these tyres. This part of ISO 4250 gives working definitions of masses and load cycles, and specifies tyre loads and reference inflation pressures for narrow and wide base tyres primarily intended for earth-mover machines.

Earth-mover tyres and rims - Loads and inflation pressures

JIS D 6403 AMD 1:2006 工业车辆用轮胎（修改件1）

この追補は，工業標準化法に基づき，日本工業標準調査会の審議を経て，経済産業大臣が改正したもので，これによって，JIS D 6403:1995は改正され，一部が置き換えられた。

Tires for industrial vehicles (Amendment 1)

SAE J1214-2002 娱乐车辆用轮胎体间隙检查

The purpose of this SAE Recommended Practice is to set guidelines for tire to wheel house and body clearances on recreational vehicles.

Tire to Body Clearance Check for Recreational Vehicles

SAE J1214-1992 娱乐车辆用轮胎体间隙检查

The purpose of this SAE Recommended Practice is set guidelines for tire to wheel house and body clearances on recreational vehicles.

Tire to Body Clearance Check for Recreational Vehicles

BS AU 50-1.5.5:1998 轮胎和车轮 轮胎 工业车辆轮胎 充气轮胎轮辋用实心轮胎（公制系列）规范 额定负载

This part of ISO 10499 specifies the load ratings of the metric series of rubber solid tyres for pneumatic tyre rims primarily intended for industrial vehicles for use on prepared surfaces. Designation, dimensions and marking are covered in ISO 10499-1; rim contours fitting these tyres are specified in ISO 3739-3.

Tyres and wheels. Tyres. Industrial vehicle tyres. Specification for solid tyres (metric series) for pneumatic tyre rims. Load ratings

ISO 10499-2:1998 工业车辆轮胎和轮辋 充气轮胎轮辋用实心轮胎(米制系列) 第2部分:额定荷载值

This part of ISO 10499 specifies the load ratings of the metric series of rubber solid tyres for pneumatic tyre rims primarily intended for industrial vehicles for use on prepared surfaces. Designation, dimensions and marking are covered in ISO 10499-1; rim contours fitting these tyres are specified in ISO 3739-3.

Industrial tyres and rims - Rubber solid tyres (metric series) for pneumatic tyre rims - Part 2: Load ratings

ISO 10499-1:1991/Cor 1:1997 工业轮胎和轮辋 充气轮胎轮辋用实心轮胎（公制系列） 第1部分：名称、尺寸和标记 技术勘误1

This standard is about Industrial tyres and rims - Solid tyres (metric series) for pneumatic tyre rims - Part 1: Designation, dimensions and marking; Technical Corrigendum 1

Industrial tyres and rims - Solid tyres (metric series) for pneumatic tyre rims - Part 1: Designation, dimensions and marking; Technical Corrigendum 1

JIS D 6401:1995 工业车辆和越野车辆用轮胎的尺寸和额定负载

この規格は，産業車両用タイヤ及び建設車両用タィヤ(以下，タイヤという。)の諸元について規定する。

Dimensions and load ratings of tires for industrial vehicles and off the road service

JIS D 6403:1995 工业车辆用轮胎

この規格は，産業車両用タィヤ( 以下，タィヤという。)について規定する。

Tires for industrial vehicles

BS AU 50-1.5.4a:1994 轮胎和车轮 轮胎 工业车辆轮胎 充气轮胎轮辋用实心轮胎（公制系列）规范：名称、尺寸和标记

This International Standard specifies the main re-quirements, including designations, dimensions and markings, of the metric series of rubber solid tyres for pneumatic tyre rims primarily intended for in-dustrial machines for use on prepared surfaces. Rim contours fitting these tyres will be specified in a future part of ISO 3739.

Tyres and wheels. Tyres. Industrial vehicle tyres. Specification for solid tyres (metric series) for pneumatic tyre rims: designation, dimensions and marking

ISO 10500:1991 工业车辆轮胎和轮辋 圆柱和斜底橡胶实心轮胎(米制系列) 名称、尺寸和标志

Specifies the main requirements of the metric series of tyres. Gives the tyre designations to be used. Tabulates the ratings needed.

Industrial tyres and rims; cylindrical and conical base rubber solid tyres (metric series); designation, dimensions and marking

ISO 10499-1:1991 工业轮胎和轮辋 充气轮胎轮辋用实心轮胎（公制系列） 第1部分：名称、尺寸和标记

Specifies the main requirements of the metric series of tyres. Gives the tyre designations to be used. Tabulates the ratings needed.

Industrial tyres and rims - Solid tyres (metric series) for pneumatic tyre rims - Part 1: Designation, dimensions and marking

ISO 4223-2:1991 轮胎工业中某些术语的定义 第2部分:实心轮胎 两种语言版

This part presents definitions of terms, in English and French, relating to solid tyres, in particular: general definitions, definitions concerning structure, components and dimensions of solid tyres. For definitions of terms relating to pneumatic tyres see Part 1. For other terms used in this field, together with their equivalents in other languages see ISO 3877. For terms relating to wheels/rims, and their definitions see ISO 3911. This second edition cancels and replaces the first edition (1983), in which definitions 1.2 and 2.1 have been modified.

Definitions of some terms used in the tyre industry; part 2: solid tyres

JIS D 6405:1990 工业车辆用实心轮胎的尺寸

この規格は，産業車両に用いるゴム製ソリッドタイヤの諸元について規定する。

Dimensions of solid tires for industrial vehicles

ISO 4250-2:1987 窄基和宽基越野轮胎和轮辋.第2部分:载荷和充气压力

Narrow and wide base off-road tyres and rims — Part 2: Loads and inflation pressures

DIN 7845-1:1987 全橡胶轮胎.尺寸和载重能力

This standard applies to rubber solid tyres with cylindrical and conical bases for fork lift trucks and other vehicles in industrial usage.

Rubber solid tyres; dimensions and load capacities

DIN 7809:1977 手推车的轮胎

Tyres for handcartsIn dieser Norm ist die Reifentragf?higkeit definiert als die zul?ssige Belastung des Reifens durch Gewicht im Sinne einer Masse, der Reifenluftdruck als ?berdruck.

Tyres for handcarts