83.200 橡胶和塑料工业设备 标准查询与下载

EN 1612:2019 塑料和橡胶机械 反应成型机械和设备 安全要求

This document specifies the essential safety requirements applicable to the design and construction of reaction moulding machines and plants as defined in 3.1 and 3.2. This document deals with all significant hazards, hazardous situations or hazardous events during all phases of the machine life cycle (see EN ISO 12100:2010, 5.4), when reaction moulding machines and plants are used as intended and under conditions of misuse that are reasonably foreseeable by the manufacturer (see Annex A). A reaction moulding machine begins at the working tank(s) and ends at the mixing head(s). A reaction moulding plant begins at the working tank(s) and ends at the product shaping and transport equipment or at the moulding equipment (see 3.6 and 3.7). This document is not applicable to reaction moulding machines and plants manufactured before the date of its publication. NOTE Reaction moulding machines and plants usually do not produce explosive atmospheres. Where materials are processed, which may cause an explosive atmosphere, the Directive 2014/34/EU on the Equipment intended for use in Potentially Explosive Atmospheres (ATEX) can be applied. Explosion hazards are not dealt with in this document. Fire hazards are not dealt with in this document. This document does not cover the requirements for the design of the exhaust systems.

Plastics and rubber machines - Reaction moulding machines and plants - Safety requirements

BS EN 1114-3:2019 塑料和橡胶机械 挤出机和挤出生产线 牵引安全要求

What is BS EN 1114-3 – Plastics and rubber machines about?   BS EN 1114-3 is the third part of the multi-series standard that provides methods and safety requirements for haul offs.   BS EN 1114-3 deals with all significant hazards, hazardous situations and events relevant to haul-offs for cable, cable core, profiles and pipes for processing plastic and rubber, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Annex A).  

Plastics and rubber machines. Extruders and extrusion lines - Safety requirements for haul-offs

EN 1114-3:2019 橡胶和塑料机械.挤压机和挤压生产线.产品拉出的安全性要求

This document deals with all significant hazards, hazardous situations and events relevant to haul-offs for cable, cable core, profiles and pipes for processing plastic and rubber, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Annex A). The hazards have been identified taking into account all phases of the machine life cycle according to EN ISO 12100:2010, 5.4. The following kinds of haul-offs are covered: - caterpillar haul-offs; - belt haul-offs; - capstan haul-offs; - belt capstan haul-offs; - roller haul-offs. The haul-off can function independently and begins at the product inlet opening and ends at the product outlet. Cutting units which are integrated with or attached to the haul-off are not covered. Take-off devices used on film or sheet lines are not covered. This document is not applicable to haul-offs that are manufactured before the date of its publication.

Plastics and rubber machines - Extruders and extrusion lines - Part 3: Safety requirements for haul-offs

ISO 5893:2019 橡胶和塑料试验设备 - 拉伸 弯曲和压缩类型（恒定速率） - 规格

This document specifies requirements for tensile-testing systems operating at constant rate of traverse and suitable for testing rubbers, plastics and adhesives, although any one system might only be applicable to a narrower range of materials. It also covers such systems when used for flexural, shear and compression tests.

Rubber and plastics test equipment — Tensile, flexural and compression types (constant rate of traverse) — Specification

T/GDEIA 11-2019 无溶剂数控复合机

数控复合机一般由放卷、涂布、复合、收卷等单元组成，并配备数控操作系统，以及双组份胶黏剂的自动混胶机或单组份胶黏剂的自动供胶机等附属装置。 主要技术内容: 5.2.1  计量钢辊、转移钢辊、涂布钢辊径向圆跳动不应大于0.01mm。 5.2.2  复合钢辊、冷却钢辊径向圆跳动不应大于0.01mm。 5.2.3  导向辊的径向圆跳动不应大于0.03mm。 5.2.4  导向辊的相对平行度误差每米不应大于0.02 mm。 导向辊的相对水平度误差每米不应大于0.03 mm 5.2.5  计量钢辊、转移钢辊、涂布钢辊、复合钢辊、冷却钢辊的相对平行度误差每米不应大于0.02 mm。计量钢辊、转移钢辊、涂布钢辊、复合钢辊、冷却钢辊的相对水平度误差每米不应大于0.02 mm。 5.3  数控功能及运行要求 5.3.1  数控复合机的数控系统功能应具备以下技术要求： a） 整机具有自动升降速、自动张力控制、自动报警提示、自动供胶控制功能； b） 整机同时具有手动控制功能； c） 系统过程运动具有监控涂布工艺参数、复合工艺参数、料卷运动参数、传动系统工作状态、纠偏运动的功能； d） 具有远程在线采集数控复合机涂布工艺参数、张力控制参数、工作温湿度等数据信息的功能。 5.3.2  机器的运动机构、机械传动系统应运行平稳、灵活、轻便、无阻滞、无异常声音。 5.3.3  机器的各操作手柄、手轮及阀门的开启、闭合应轻便、可靠。 5.3.4  机器的操作按键应灵敏可靠；执行机构动作应协调准确、无卡阻或自发性移动。 5.3.5  机器的零部件、紧固件的连接应牢固可靠，无松动现象。 5.3.6  机器的各放料、走料、收料应运行平稳、各导向辊应转动灵活。 5.3.7  机器的水循环系统应畅通，无泄漏、压力稳定。 5.3.8  机器的液压系统应无泄漏，操作方便、反应灵敏。 5.3.9  机器的气动系统应无泄漏，操作方便，压力稳定。 5.3.10  机器的润滑系统应覆盖所有运转部件，方式和油脂选择应合理，加注方便、油路畅通、无渗漏。 5.3.11  机器的混胶系统或供胶系统的供胶量充足、供胶温度稳定，混胶输出比例准确。 5.3.12  机器的轴承工作温升不应超过(环境温度）40℃，最高温度不超过80℃。 5.3.13  机器的整机空运转噪声不应大于80 dB(A)。

Digital control solventless laminating machine machine

T/CPMIA Z01-2019 全电动塑料注射成型机

1.动模板与定模板的模具安装面间允许的平行度应符合表1的规定 2.喷嘴孔轴线与定模板模具定位孔轴线的同轴度应符合表2的规定。 3.锁模力重复精度应不大于1%。 4.拉杆受力偏载率应不大于3%。 5.开模重复定位精度应不大于0.05 mm。 6.注射定位精度应不大于0.05 mm。 7.顶出定位精度应不大于0.10 mm。 8.料筒温度稳态波动值应不超过2 ℃。    能耗等级、噪声、平行度等的要求等见标准文本...

All electric plastics injection moulding machines

T/NBSJ 001-2019 高速精密塑料注射成型机

本标准规定了高速精密塑料注射成型机（以下简称高精注塑机）的术语和定义、基本参数、基本要求、技术要求、检测方法、检验规则、标志、包装、运输及贮存。本标准适用于注射速度不低于200mm/s单螺杆、单工位、卧式塑料注射成型机。

High-speed precision plastic injection moulding machine

T/GDEIA 4-2019 多层共挤数字控制吹膜机组

主要技术参数  项目　单位　五层共挤吹膜机组 SJ（5）-55/65/75/65/55-2000　三层共挤吹膜机组 SJ （3）-55/65/55-1800　双层共挤吹膜机组 SJ（2）-75/75-1800 螺杆直径　mm　Φ55/65/75/65/55　Φ55/65/55　φ75/75  薄膜吹制宽度　mm　1100～1800　1000～1600　1100～1700 最大产量（IBC+内冷）　kg/h　400　260　160 模头直径　mm　φ400/φ450　φ350/φ400　φ400 螺杆长径比　     —　30：1　30：1　30：1 风环直径　mm　450/500　400/450　450 主电机功率　kw　37/45/55/45/37　37/45/37　55/55 膜泡内冷系统宽度 精度（IBC）　mm　±8　±8　±8 收卷方式　—　表面中心间隙收卷或全自动背对背摩擦双收卷　表面中心间隙收卷或  全自动背对背摩擦双收卷　全自动（或手动）背对背摩擦双收卷 吹膜纠偏精度　mm　±1.8　±1.8　±1.8 张力控制范围　N/m　0～100　0～100　0～100 张力自动调整精度　%　±2　±2　±2 最大声压级：　dB(A)　≤85　≤85　≤85 选配功能　—　按合同要求执行 吹膜机组吹制薄膜质量要求 项  目　指  标 　成品膜厚度极限偏差 成品膜厚度（mm）　0.020～0.050　±8%～±15% 　0.051～0.090　±7%～±8% 　0.091～0.150　±6%～±7% 薄膜外观质量　—　薄膜外观应牢固、平整，洁净；表面应无明显折皱、暴筋、气泡、白斑、划痕、杂质污染等缺陷。成卷薄膜不应有明显裂纹、松驰、褶皱、 瑕疵、杂质及任何影响适用性的缺陷。 薄膜收卷质量　单位（mm）　不允许有皱筋、松紧不一、杂质、翘边、划伤，跑边≤3 mm。

Multi layer co extrusion numerical control film blowing machine

DIN EN 12012-1:2018 塑料和橡胶机械 粉碎机 第1部分：刀片造粒机和粉碎机的安全要求；德文版 EN 12012-1:2018

This document specifies the essential safety requirements applicable to the design and construction of blade granulators and shredders used to reduce the size of products made from plastics and rubber.

Plastics and rubber machines - Size reduction machines - Part 1: Safety requirements for blade granulators and shredders; German version EN 12012-1:2018

T/ZZB 0468-2018 加长型行星式螺杆挤出机

本标准规定了加长型行星式螺杆挤出机的术语和定义、基本要求、基本参数、技术要求、试验方法、检验规则、标志、包装、运输及贮存和质量承诺。 本标准适用于加工塑料制品的加长型行星式螺杆挤出机（以下简称“挤出机”）。

Elongated planetary screw extruder

T/CRIA 22001-2018 巨型工程机械轮胎模具

3 术语和定义 4 分类 5要求 6 检验方法 7 检验规则 8 标志、标牌和使用说明书 9 包装、运输和贮存

Mould for giant earth-mover tyre

T/CRIA 22002-2018 轮胎硫化胶囊模具

3 术语和定义 4 分类 5要求 6 检验方法 7 验收 8 标志和使用说明书 9包装、运输和贮存

Mould for tyre curing bladder

DIN EN 12013:2018 塑料和橡胶机械.密炼机.安全性要求;德文版本EN 12013-2018

This standard deals with internal mixers for rubber and plastics, irrespective of their size and irrespective of the control modes of the hopper front door and discharge door.

Plastics and rubber machines - Internal mixers - Safety requirements; German version EN 12013:2018

EN 12013:2018 橡胶和塑料机械.密闭式混合机.安全要求

Plastics and rubber machines - Internal mixers - Safety requirements

KS M ISO 13802-2016 塑料摆锤冲击试验机的验证夏比、伊氏和拉伸冲击试验

Plastics－Verification of pendulum impact-testing machines－Charpy, Izod and tensile impact-testing

KS M ISO 13802-2016(2021) 塑料－摆锤冲击试验机的验证－夏比、伊佐德和拉伸冲击试验

Plastics－Verification of pendulum impact-testing machines－Charpy, Izod and tensile impact-testing

KS M ISO 13802:2016 塑料 摆锤冲击试验机的鉴定 却贝、艾卓德和拉伸冲击试验

Plastics－Verification of pendulum impact-testing machines－Charpy, Izod and tensile impact-testing

DIN EN ISO 13802:2016 塑料.摆锤冲击试验机鉴定.却贝、艾卓德和拉伸冲击试验(ISO 13802-2015,修正版2016-04-01).德文版本EN ISO 13802-2015

Plastics - Verification of pendulum impact-testing machines - Charpy, Izod and tensile impact-testing (ISO 13802:2015, Corrected version 2016-04-01); German version EN ISO 13802:2015

KS B 4154-2015(2020) 用于塑料模具的回针

Return pins of moulds for plastics

KS B 4155-2015 塑料模具导销套

Guide pin bushes of moulds for plastics