共找到 95 条与 相关的标准,共 7 页
本文件规定了纸巾的分类、原材料、要求、试验方法、检验规则、标志、包装、运输和贮存。 本文件适用于日常生活所用的各种纸面巾、纸餐巾、纸手帕等。 本文件不适用于湿巾、擦手纸和厨房纸巾。
Paper towel
ISO 12625-6:2016 specifies a test method for the determination of grammage of tissue paper and tissue products.
Tissue paper and tissue products — Part 6: Determination of grammage
This document specifies a test method for the determination of the tensile strength, stretch at maximum force and tensile energy absorption of tissue paper and tissue products. It uses a tensile-testing apparatus operating with a constant rate of elongation. It also specifies the method of calculating the tensile index and the tensile energy absorption index.
Tissue paper and tissue products — Part 4: Determination of tensile strength, stretch at maximum force and tensile energy absorption
BS EN ISO 12625-16. Tissue paper and tissue products - Part 16. Determination of optical properties. Opacity (paper backing). Diffuse reflectance method
1 Scope This document specifies a test method for the determination of the surface friction of tissue paper and tissue products using a contact-type surface tester.
Tissue paper and tissue products - Determination of surface friction
1 Scope This document specifies testing procedures for the instrumental determination of brightness and colour of tissue paper and tissue products viewed in indoor daylight conditions. It also gives specific instructions for the preparation of test pieces (single-ply, multi-ply products) and for the optical measurements of products, where special precautions can be necessary. NOTE The properties called D65 brightness and colour are measured with an instrument adjusted to a much higher UV content than that specified in this document.
Tissue paper and tissue products. Part 15. Determination of optical properties. Measurement of brightness and colour with C/2° (indoor daylight) illuminant
This document specifies testing procedures for the instrumental determination of brightness and colour of tissue paper and tissue products viewed in indoor daylight conditions. It also gives specific instructions for the preparation of test pieces (single-ply, multi-ply products) and for the optical measurements of products, where special precautions can be necessary. NOTE The properties called D65 brightness and colour are measured with an instrument adjusted to a much higher UV content than that specified in this document.
Tissue paper and tissue products - Part 15: Determination of optical properties - Measurement of brightness and colour with C/2° (indoor daylight) illuminant (ISO 12625-15:2022)
This document specifies a test method for the determination of the tensile strength, stretch at maximum force and tensile energy absorption of tissue paper and tissue products. It uses a tensile-testing apparatus operating with a constant rate of elongation. It also specifies the method of calculating the tensile index and the tensile energy absorption index.
Tissue paper and tissue products - Part 4: Determination of tensile strength, stretch at maximum force and tensile energy absorption (ISO 12625-4:2022)
The Gulf standard specifies the requirements of toilet paper, virgin, blended or recycled pulp, which comes in roll form for use in water closets. It is applicable to embossed and non-embossed paper comprising one or more plies.
Toilet Paper
BS ISO 12625-19. Tissue paper and tissue products - Part 18. Determination of surface friction
What is ISO 12625-17 about? ISO 12625-17 is the 17th part of a multi-series standard. It deals with the determination of the disintegration in the water of tissue paper and tissue products. ISO 12625-17 describes a test method to determine the disintegration in water for tissue paper and tissue products after agitation time periods of 30s, 2 min and 10 min. ISO 12625-17 describes the apparatus, conditioning and preparation of test pieces, and specifies a test procedure to assess the disintegration of tissue paper and tissue products when subjected to mechanical agitation in water at different time periods. Who is ISO 12625-17 for?
Tissue paper and tissue products - Determination of disintegration in water
Tissue paper and tissue products - Part 4: Determination of tensile strength, stretch at maximum force and tensile energy absorption (ISO 12625-4:2016); German version EN ISO 12625-4:2016
Tissue paper and tissue products - Part 6: Determination of grammage (ISO 12625-6:2016); German version EN ISO 12625-6:2016
Tissue paper and tissue products - Part 5: Determination of wet tensile strength (ISO 12625-5:2016); German version EN ISO 12625-5:2016
Tissue paper and tissue products - Part 16: Determination of optical properties - Opacity (paper backing) - Diffuse reflectance method (ISO 12625-16:2015); German version EN ISO 12625-16:2015
Tissue paper and tissue products - Part 15: Determination of optical properties - Measurement of brightness and colour with C/2° (indoor daylight) illuminant (ISO 12625-15:2015); German version EN ISO 12625-15:2015
Tissue paper and tissue products - Part 9: Determination of ball burst strength (ISO 12625-9:2015); German version EN ISO 12625-9:2015
Tissue paper and tissue products - Part 9 : determination of ball burst strength
Dieser Teil der ISO 12625 legt Prufverfahren fur die instrumentelle Bestimmung von Brightness und Farbe fur Tissue-Papier und Tissue-Produkte unter Tageslichtbedingungen in Innenraumen fest. Es werden auch genaue Anweisungen fur die Vorbereitung von Proben (einlagige, mehrlagige Produkte) und fur die optischen Messungen von Produkten gegeben, bei denen besondere Vorsichtsmasnahmen notwendig sein konnen. ANMERKUNG Die als D65-Brightness und -Farbe bezeichneten Eigenschaften werden mit einem Gerat gemessen, das auf einen viel hoheren UV-Anteil angepasst ist, als in diesem Teil der ISO 12625 festgelegt wird. Die Messung von D65-Brightness und -Farbe werden in ISO 12625-7 beschrieben.
Tissue paper and tissue products - Part 15: Determination of optical properties - Measurement of brightness and colour with C/2��indoor daylight) illuminant
Dieser Teil der ISO 12625 legt Prufverfahren fur die instrumentelle Bestimmung der Opazitat uber Stapel fur Tissue-Papier und Tissue-Produkte mittels diffuser Reflexion fest. Dieser Teil der ISO 12625 gibt auch genaue Anweisungen fur die Vorbereitung von Proben aus einlagigen und mehrlagigen Produkten, bei denen besondere Masnahmen/Verfahren notwendig sein konnen. Die Opazitat von Tissue-Papier und Tissue-Produkten, die optischen Aufheller enthalten, kann ebenfalls bestimmt werden, falls der UV-Anteil der Probenbeleuchtung wie in ISO 2470-1 beschrieben mit einem fluoreszierenden Referenzstandard, der von einem autorisierten Labor bezogen wurde, auf die CIE Lichtart C eingestellt ist. Dieser Teil der ISO 12625 ist nicht auf farbiges Tissue-Papier und Tissue-Produkte anwendbar, die fluoreszierende Farbstoffe oder Pigmente enthalten.
Tissue paper and tissue products - Part 16: Determination of optical properties - Opacity (paper backing) - Diffuse reflectance method
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号