87.060.30 (Solvents) 标准查询与下载

ASTM D4734-96b 精制苯-545标准规范

Standard Specification for Refined Benzne-545

ASTM D4206-96(2013) 用小刻度开杯仪做液体混合物持续燃烧试验的标准试验方法

4.1 Mixtures of flammable liquids and nonflammable liquids, such as an alcohol and water mixture, are classified by the U. S. Government by the definition of flammable liquid based on a closed-cup flash point method. Thus, mixtures may be classed as flammable even though they do not sustain burning. This test method determines the ability of a liquid mixture to sustain burning and, when used with a closed-cup flash point method, indicates the flammability characteristics of the mixture. 1.1 This test method2 describes a procedure for determining the sustained burning characteristics of mixtures of flammable and nonflammable liquids and to mixtures containing liquids with widely different flash points. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard should be used to measure and describe the response of materials, products, or assemblies to heat and flame under controlled conditions and should not be used to describe or appraise the fire-hazard or fire-risk of materials, products, or assemblies under actual fire conditions. However, results of the test may be used as elements of a fire-hazard assessment or a fire-risk assessment which takes into account all of the factors which are pertinent to an assessment of the fire hazard or fire risk of a particular end use. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Sustained Burning of Liquid Mixtures Using the Small Scale Open-Cup Apparatus

ASTM D1364-95(1999) 挥发性溶剂中水的标准试验方法（卡尔费休试剂滴定法）

1.1 This test method covers the determination of water in volatile solvents and chemical intermediates used in paint, varnish, lacquer, and related products. 1.2 This test method is not applicable in the presence of mercaptans, peroxides, or appreciable quantities of aldehydes or amines. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 1.4 For hazard information and guidance, see the supplier''s Material Safety Data sheet.

Standard Test Method for Water in Volatile Solvents (Karl Fischer Reagent Titration Method)

ASTM D3545-95 气相色谱法测定乙酸酯中乙醇含量和纯度的标准试验方法

1.1 This test method covers the determination by gas chromatography of the ester content and the corresponding alcohol content of acetate esters. This test method has been applied to ethyl, n-propyl, isopropyl, n-butyl, isobutyl, and 2-ethoxyethyl acetates.1.2 Water, and in some cases acetic acid, cannot be determined by this test method and must be measured by other appropriate ASTM procedures and the results used to normalize the chromatographic value.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.1.4 For specific hazard information and guidance, see the supplier's Material Safety Data Sheet for material listed in this specification.

Standard Test Method for Alcohol Content and Purity of Acetate Esters by Gas Chromatography

ASTM D1612-95(1999) 甲醇中丙酮含量的标准试验方法

1.1 This test method covers a procedure for detecting the presence of acetone in methanol in amounts greater than 0.003 weight%. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 1.3 For hazard information and guidance, see the supplier''s Material Safety Data Sheet.

Standard Test Method for Acetone in Methanol

ASTM D2359-93 精炼苯535标准规范

Standard Specification for Refined Benzene-535

ASTM D1296-93(1996) 挥发性溶剂和烯释剂气味的标准试验方法

1.1 This test method covers a comparative procedure for observing the characteristic and residual odors of volatile organic solvents and diluents to determine their odor acceptability in a solvent system. 1.2 It is not intended that this test method be employed to determine subtle odor differences between materials or to determine odor intensity. 1.3 It is recommended that this test method not be employed to determine the residual odor of a liquid if its time for evaporation to dryness at room temperature exceeds 30 min or as agreed upon. 1.4 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific hazard statements, see Section 4. 1.5 For specific hazard information, see the supplier's Material Safety Data Sheet (MSDS).

Standard Test Method for Odor of Volatile Solvents and Diluents

ASTM D3362-93(2000) 气相色谱法测定丙烯酸酯纯度的标准试验方法

1.1 This test method covers the determination of the purity of acrylate, ethyl acrylate, n-butyl acrylate, and 2-ethylhexyl acrylate by gas chromatography and, in addition, provides a means for measuring certain impurities such as alcohols and other esters. Water and acidity are measured by other appropriate ASTM procedures and the results are used to normalize the chromatographic values. 1.2 For hazard information and guidance, see the supplier''s Material Safety Data Sheet. 1.3 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of whoever uses this standard to consult and establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific hazard statements are given in Section 7.

Standard Test Method for Purity of Acrylate Esters by Gas Chromatography

ASTM D2636-91(1996) 己烯甘醇的标准规格

1.1 This specification covers hexylene glycol for use in paint, varnish, lacquer, and related products. 1.2 For specific hazard information and guidance, consult supplier''s Material Safety Data Sheet.

Standard Specification for Hexylene Glycol

ASTM D2917-91(1998) 甲基异戊酮的标准规范

1.1 This specification covers methyl isoamyl ketone (98% grade) for use in paint, varnish, lacquer, and related products. 1.2 For specific hazard information and guidance, see the supplier's Material Safety Data Sheet.

Standard Specification for Methyl Isoamyl Ketone

ASTM D3541-91(2000) 丙烯酸2-乙基己酯的标准规格

1.1 This specification covers 2-ethylhexyl acrylate (99% grade) for use in paint, varnish, lacquer, and related products. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific hazard statements are given in Section 4.1. 1.3 For specific hazard information and guidance, consult supplier''s Material Safety Data Sheet.

Standard Specification for 2-Ethylhexyl Acrylate

ASTM D2349-90(2009) 溶剂可还原的涂料中溶剂组份特性的定性测定标准试验方法

This test method provides a procedure for determining qualitatively the composition of solvent in paints containing only hydrocarbon solvents.1.1 This test method covers the determination of the nature of solvent in solvent-reducible house paints containing only hydrocarbon solvents. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Qualitative Determination of Nature of Solvent Composition in Solvent-Reducible Paints

ASTM D608-90(2001) 记录地下水取样事件的标准指南

1.1 This specification covers dibutyl phthalate (99% grade). 1.2 For specific hazard information and guidance, see the supplier''s Material Safety Data Sheet for materials listed in this specification.

Standard Specification for Dibutyl Phthalate

ASTM D3540-90(2001) 合成乙酸伯戊酯(98%级)

1.1 This specification covers synthetic primary amyl acetate (98 % grade). 1.2 For specific hazard information and guidance, see the supplier's Material Safety Data Sheet for material listed in this specification.

Standard Specification for Primary Amyl Acetate, Synthetic (98% Grade)

ASTM D1617-90(2001) 溶剂和稀释剂酯化值的标准测试方法

1.1 This test method covers the determination of the ester value of solvents and thinners used in lacquers and other coatings. 1.2 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For a specific hazard statement, see Note 2. 1.3 For hazard information and guidance, see the supplier''s Material Safety Data Sheet.

Standard Test Method for Ester Value of Solvents and Thinners

ASTM D2349-90(2014) 可还原溶剂型涂料溶剂组份的自然定性测定的标准试验方法

3.1 This test method provides a procedure for determining qualitatively the composition of solvent in paints containing only hydrocarbon solvents. 1.1 This test method covers the determination of the nature of solvent in solvent-reducible house paints containing only hydrocarbon solvents. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Qualitative Determination of Nature of Solvent Composition in Solvent-Reducible Paints

ASTM D4941-89(1999)e1 画家用膏状颜料消耗品的制备标准实施规范

1.1 This practice covers the production of uniform films of artists'' tube paints and other nonflowing pigmented paints using paint applicators designed for less viscous paints. 1.2 Information on how to achieve opaque specimens from these paints is included. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Preparing Drawdowns of Artists'' Paste Paints

ASTM D4941-89(2004) 画家用膏状颜料消耗品的制备标准实施规范

1.1 This practice covers the production of uniform films of artists'' tube paints and other nonflowing pigmented paints using paint applicators designed for less viscous paints.1.2 Information on how to achieve opaque specimens from these paints is included.1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Preparing Drawdowns of Artists'' Paste Paints

ASTM D3271-87(2001) 直接把可还原溶剂型涂料注射到气相色谱仪中进行溶剂分析的标准实施规程

1.1 This practice describes the techniques used to inject whole paint samples directly into a gas chromatograph to obtain a chromatogram from which the solvent composition may be established. 1.2 This practice is not designed to be quantitative. 1.3 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. A specific hazard statement is given in 6.1.

Standard Practice for Direct Injection of Solvent-Reducible Paints Into a Gas Chromatograph for Solvent Analysis

ASTM D3271-87(2006) 直接把溶剂稀释的涂料注射到气相色谱仪中进行溶剂分析

Gas chromatographic separation of solvents present in whole paints is the preferred first step for identifying and quantitating solvent compositions, using auxiliary procedures and techniques.1.1 This practice describes the techniques used to inject whole paint samples directly into a gas chromatograph to obtain a chromatogram from which the solvent composition may be established. ,1.2 This practice is not designed to be quantitative.1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standardThis standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. A specific hazard statement is given in 6.1.

Standard Practice for Direct Injection of Solvent-Reducible Paints Into a Gas Chromatograph for Solvent Analysis