91.040.20 商业和工业建筑物 标准查询与下载

T/GZWL 002-2017 现代医药物流中心建设运营规范

4  设施与设备 4.1  场地要求 物流中心的选址、设计、布局、建造等应当符合药品储存配送的要求，防止药品的污染、交叉污染、混淆和差错，且物流中心产权为企业自有。 4.2  仓储要求 4.2.1  仓储面积 物流中心套内面积不得少于20000平方米，其中自动立体库房或高位货架库房套内面积不得少于3000平方米。 4.2.2  仓储条件 企业仓储设施的条件应当满足药品的合理、安全储存，并达到以下要求： a）库房内外环境整洁、无污染源，库区地面硬化或者绿化； b）库房内墙、顶光洁，地面平整示、确认功能，货位自动分配、自动识别、自动寻址功能； c）具有药品出库复核条码扫描功能，对药品按订单、批号进行核对核查。 4.2.4.3  温湿度监控设备 企业库房应当配备环境指标符合国家标准的中央空调系统等有效调控库房温湿度及有效进行库房室内外空气交换的设备。企业库房、冷藏冷冻药品运输设备应当配备温湿度自动监测系统，具有24小时自动监测、显示、记录以及异常情况自动报警功能，并支持与药品监督管理部门联网管理。温湿度自动监测系统应当符合GSP附录的要求。 4.2.4.4仓储其他设施 企业仓储库房应收需要进行计算机系统论证验收； d）信息系统需采用双机热备技术；物流管理信息系统需要与ERP、WCS、TMS等业务及控制系统服务器分开；企业自有服务器应放在企业中央机房或物流中心中央机房中。对于数据库存储服务器必须采用不间断电源（UPS）在紧急情况下持续供电2小时以上； e）物流中心网络分层：整个物流中心局域网防火墙分割需要分为业务外网层、管理层、控制设备层。 5.3  功能要求 医药物流系统业务要求能覆盖委托方、己方药品的储存、配送全过程的质量控制，安全管理、信息跟踪记录存储、基本功能包括但不仅

The regulation for construction and operation of modern medical logistics center

DB32/T 3196-2017 商场单位综合电耗限额及计算方法

本标准规定了百货店及购物中心（以下称商场）经营过程中单位综合电力消耗（以下称电耗）限额的单位综合电耗限额、综合电耗的统计范围和计算方法及主要节能管理措施。 本标准适用于营业面积≥10000平方米的商场电力消耗量的计算与评价。

Comprehensive power consumption quota and calculation method for shopping malls

SB/T 10907-2012 网店信用评估要素指南

本标准规定了电子商务交易主体信用评估的基本原则、评估类别和评估要素。本标准适用于电子商务交易的B2B、B2C、C2C等模式的企业。

Web shop credit rating factors guide

ANSI/ASTM E1679:2013 对建筑物或建筑物相关设施制定适用性要求的实施规程

Standard Practice for Setting the Requirements for the Serviceability of a Building or Building-Related Facility@ and for Determining What Serviceability is Provided or Proposed

ANSI/BOMA Z65.2-2012 工业建筑.测量标准方法

The revision of the existing ANSI/BOMA Industrial Standard (ANSI/BOMA Z65.2-2009) was necessary to make it consistent with the new 2010 (ANSI/BOMA Z65.1-2010) Office Standard and severing the link with the old 1996 version of the Office Standard.

Industrial Buildings: Standard Methods of Measurement

ANSI/ASTM F2473:2012 水浴Rethermalizers性能测试方法

Test Method for Performance of Water-Bath Rethermalizers

DB21/T 1899-2011 公共建筑节能（65%）设计标准

Public building energy saving (65%) design standard

ANSI/ASTM F1964:2011 压力炸锅的性能试验方法

Test Method for the Performance of Pressure Fryers

ANSI/TIA-862-A-2011 建筑物自动化系统布线标准

This second default ballot is a result of the comment resolution held regarding SP-3-4655-RV1 Draft 3.0, Building Automation Systems Cabling Standard, the first default ballot and is limited to 2 specific technical changes and unresolved 'disapprove' comments. Other comments submitted to the first default ballot of SP-3-4655-RV1 Draft 3.0, Building Automation Systems Cabling Standard were resolved editorially. The results of the first default ballot of SP-3-4655-RV1 Draft 3.0, Building Automation Systems Cabling Standard ballot consisted of 16 'abstain', 21 'approve' votes, 1 'approve with comments' votes, and 1 with

Building Automation Systems Cabling Standard

ANSI/BOMA Z65.5-2010 零售建筑物:测量的标准方法

This standard of measurement is intended for application to buildings containing retail types of occupancies. Methodologies defined are relevant to both new and existing buildings, comprised of single or multiple stories that may be leased to one or multiple tenants. Although references are made to a development parcel this standard is not intended for application to site improvements other than buildings. The uniformity of the measurement of retail area established by this standard not only serves the interests of property owners, managers and tenants but also, because they are succinctly defined, may appeal to others like facility managers, brokers, and appraisers.

Retail Buildings: Standard Methods of Measurement

ANSI/GBI 01-2010 商业建筑物用绿色建筑评估协议

This Standard applies to a broad range of commercial building types, including offices, multi-family, health care, schools, universities, labs, industrial, retail, etc., as well as to major renovations. The Standard does not apply to single-family homes. The Standard includes a point-based assessment or rating system leading to commonly valued environmental and related efficiency outcomes for new commercial buildings and major renovations, including criteria related to planning for subsequent operations and maintenance.

Green Building Assessment Protocol for Commercial Buildings

SB/T 10455-2008 社区商业设施设置与功能要求

本标准规定了社区商业设施设置要求及社区商业的功能配套要求。 本标准适用于老社区商业设施的改造和新社区的商业设施的设置。

Requirement of the setup and function of community commerce infrastructure

KS F 1791-2007 基于楼宇自控网的建筑物自控系统设计标准

이 규격은 건물의 신축 및 개보수 공사에 있어서 건물의 자동제어 시스템을 위한 폭넓은 이해

Guide to specifying interoperable building automation and control systems using BACnet

DL/T 5095-2007 火力发电厂主厂房荷载设计技术规程

本标准规定了火力发电厂主厂房荷载设计时的主要技术要求。 本标准适用于汽轮电机组容量为12MW～600MW级新建、扩建或改建的火力发电厂主厂房设计，涉外电厂工程设计可参照使用。 本校规适用于火力发电厂主厂房及集中控制楼自0m地面（含地下室）至屋面间的工艺各专业及土建专业的荷载。本标准不适用于在此范围内的烟囱、烟道荷载设计。

Technical code for designing load of main building in fossil fuel power plant

SH/T 3521-2007 石油化工仪表工程施工技术规程

本规程规定了石油化工自动化仪表工程施工的技术要求。 本规程适用于石油化工新建、扩建工程的自动化仪表工程的施工。改建工程可参照执行。

Technical specincation for construction of instrumentation engineering in petrochemical industry

JGJ 67-2006 办公建筑设计规范

本规范适用于所有新建、改建、扩建的办公建筑的设计。

Design code for office building

ANSI/ASTM F1965:2006 台式炉性能测试方法

This test method covers the energy consumption and cooking performance of deck ovens. The food service operator can use this evaluation to select a deck oven and understand its energy consumption. This test method is applicable to gas and electric deck ovens. The deck oven can be evaluated with respect to the following (where applicable): Energy input rate and thermostat calibration (10.2), Preheat energy consumption and time (10.3), Idle energy rate (10.4), Pilot energy rate (if applicable) (10.5), or Cooking energy efficiency and production capacity (10.6). The values stated in inch-pound units are to be regarded as standard. The SI units given in parentheses are for information only. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

TEST METHOD FOR PERFORMANCE OF DECK OVENS

HG/T 21510-2005 橡胶工厂初步设计文件内容深度规定

本标准规定了橡胶工厂初步设计的工厂概况、设计依据、设计指导思想以及设计范围与分工。

Specification on content and procedure of preliminary design file for rubber plant

CSN 735305-2005 飞行器燃料舱中用作爆炸抑制剂和挡板材料的纤维聚酰胺材料.试验方法

Administration buildings and rooms

DB61/T 340~346-2004 无公害绞股蓝标准综合体

本标准适用于无公害绞股蓝产地选择和建立

Pollution-free Gynostemma pentaphylla standard complex