共找到 796 条与 建筑材料综合 相关的标准,共 54 页
BS EN 17216. Construction products. Assessment of release of dangerous substances. Determination of radium-226, thorium-232 and potassium-40 activity using gamma-ray spectrometry
Specification for application of decorative inlays on ceramic slate slabs
ω(ZrO2)(%)≥16 耐碱后拉伸断裂强力保留率(经纬向)(%)≥75
Building external wall external thermal insulation system repair mesh S-type pressure pasted face protection building structure
珍珠岩与真空板结合,导热系数 真空绝热板≤0.005 W/(m·k) 珍珠岩保温板≤0.058 W/(m·k) 燃烧性能等级、级W/(m·k) A(A2)
JZZ expanded perlite thermal insulation decorative composite board exterior wall external thermal insulation system application technical standards
本文件规定了硅烷改性聚醚灌浆材料的术语和定义、标记、一般要求、技术要求、试验方法、检验规则及标志、包装、运输和贮存。
Silane modified polyether grouting material
本文件规定了钢网格结构螺栓球节点用封板、锥头和套筒的术语和定义,标记、型式与尺寸,技术要求,试验方法,检验规则,标志、包装、运输和贮存。
Sealing plates, cones and sleeves for bolted ball joints of steel mesh structures
本文件规定了固废基纤维混凝土盾构管片的术语和符号、分类、规格和标记、材料、制作工艺、要求、试验方法、检验规则、标志与岀厂证明书、贮存和运输。
Solid Waste Based Fiber Concrete Shield Segments
本文件规定了抗流挂聚氨酯防水涂料的术语和定义、分类和标记、一般要求、技术要求、试验方法、检验规则及标志、包装、运输和贮存。
Anti-sag polyurethane waterproof coating
Technical specification for application of lepidolite slag in cement and concrete
SHD复合型保温板楼板保温隔声系统计权撞击改善量ΔLW,dB≥15
Application technical standard for SHD composite insulation board floor insulation and sound insulation system
本规程共分7章和2个附录,主要内容包括:总则、术语和符号、管材与连接、设计、施工、试验与检验、验收等。
Engineering technical regulations for locking and anti-detachment corrugated winding polyethylene drainage pipes
本规程共分6章和2个附录,主要技术内容包括:总则、术语、再生砂粉、设计、路基施工、质量验收等。
Technical specification for construction solid waste recycled sand powder subgrade engineering
范围、规范性引用文件、术语和定义、符号、缩略语、原材料、分类与标记、结构型式与连接方式、技术要求、试验方法、检验规则、标志、运输和贮存。
FRP-HDPE reinforced winding double-layer composite pipe
本文件规定了钢筋连接用直螺纹套筒(以下简称套筒)的术语和定义,符号,分类、代号与标记,要求,检验方法,检验规则,交货与验收,标志、包装、运输与贮存。
Straight threaded sleeves for rebar connections
本文件规定了室内装饰装修用美容胶的术语和定义、分类和标记、要求、试验方法、检验规则及标志、包装、运输和贮存。
Beauty glue for interior decoration
635MPa级热轧带肋高强钢筋和热处理带肋高强钢筋应用范围需按本团体标准的规定执行; 钢筋的技术要求和检验方法参照GB/T1499.2
Application technical standard of 635MPa grade hot-rolled ribbed high-strength steel bars
本文件规定了喷射混凝土用液体低碱速凝剂的术语和定义,分类与标记,要求,试验方法,检验规则,标志、包装、运输和贮存。
Liquid low-alkali accelerator for shotcrete
本文件规定了建筑用覆铝膜隔热金属板的分类、代号和标记、材料、要求、试验方法、检验规则、标志、包装、运输及贮存。
Aluminum-clad heat-insulating metal panels for buildings
单位面积质量、面积及厚度 规格(公称厚度) /mm 3 4 5 上表面材料 PE S M PE S M PE S M 下表面材料 PE PE、 S PE PE、 S PE PE、 S 面积/ (m2/卷) 公称面积 10、 15 10、 7.5 7.5 偏差 ±0.10 ±0.10 ±0.10 单位面积质量/(kg/m2)≥ 3.3 3.5 4.0 4.3 4.5 5.0 5.3 5.5 5.0 厚度/mm 平均值≥ 3.0 4.0 5.0 最小单值 2.7 3.7 4.7
Elastomer Modified Asphalt Fiberglass Mat Waterproof Membrane
表1 N 类单位面积质量、厚度 厚度规格/mm 1.2 1.5 2.0 上表面材料 PE、 PET、 D PE、 PET、 D PE、 PET、 D 单位面积质量/(kg/m2) ≥ 1.2 1.5 2.0 厚度/mm 平均值 ≥ 1.2 1.5 2.0 最小单值 1.0 1.3 1.7 表2 PY 类单位面积质量、厚度 厚度规格/mm 2.0 3.0 4.0 上表面材料 PE、 D S PE、 D S PE、 D S 单位面积质量/(kg/m2) ≥ 2.1 2.2 3.1 3.2 4.1 4.2 厚度/mm 平均值 ≥ 2.0 3.0 4.0 最小单值 1.8 2.7 3.7
Self-adhesive polymer modified bitumen waterproof membrane
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号