91.100.60 隔声和绝热材料 标准查询与下载
共找到 1714 条与 隔声和绝热材料 相关的标准，共 115 页
前言 1 范围 2 规范性引用文件 3 术语和定义. 4 标记 4.1 标记方法 4.2 标记示例 5 原材料 5.1 乳液 5.2 拌合水 5.3 矿物纤维 5.4 云母粉 5.5 有机硅消泡剂 5.6 水处理剂异噻唑啉酮衍生物 6 要求 6.1 外观 6.2 撞击声隔声性能 6.3 基本性能（3mm 硬化隔声层） 6.4 燃烧性能 6.5 有害物质限量 7 试验方法 7.1 外观 7.2 撞击声隔声性能 7.3 基本性能 7.4 燃烧性能 7.5 有害物质限量 8 检验规则 8.1 检验类别与项目 8.2 出厂检验 8.3 型式检验 9 产品标志及随行文件 9.1 产品标志 9.2 产品随行文件 10 包装、运输和贮存 10.1 包装 10.2 运输 10.3 贮存
Sound insulation coating for building floor
- ICS
- 91.100.60
- CCS
- E501
- 发布
- 2022-01-28
- 实施
- 2022-03-31
本文件规定了轻质多孔材料孔隙率测定中涉及的术语和定义、方法提要、仪器、样品制备、试验环境、试验步骤、结果计算。 本文件适用于无机轻质多孔材料孔隙率的测定。
Method for determination of porosity of lightweight porous material
- ICS
- 91.100.60
- CCS
- C309
- 发布
- 2022-01-25
- 实施
- 2022-01-28
BS EN 17237. Thermal insulation products for buildings. External thermal insulation composite kits with a rendering system (ETIC kits). Characteristics
- ICS
- 91.100.60
- CCS
- 发布
- 2022-01-13
- 实施
- 2022-01-13
1 Scope This document specifies the requirements for factory-made aerogel blankets, which are used for the thermal insulation of building applications. This document specifies insulation that exhibits thermal insulating performance through high porosity and nano-sized pores by compounding aerogel with net-like fibrous material, e.g. polyester, glass fibre, ceramic fibre. The products are delivered as a blanket type. This document describes product characteristics and includes procedures for testing, evaluation of conformity and marking and labelling. This document does not specify the required level of a given property to be achieved by a product to demonstrate fitness for purpose in a particular application.
Thermal insulation products. Aerogel blanket for buildings. Specification
- ICS
- 91.100.60
- CCS
- 发布
- 2021-12-31
- 实施
- 2021-12-31
This document outlines requirements for exterior insulation and finish systems (EIFS), used in combination with a drained air space as an exterior wall cladding system. The document includes requirements for a water resistive barrier assembly that are used as part of EIFS. This document outlines testing procedures with pass/fail criteria for an exterior insulation and finish system. The procedures cover the liquid applied water resistive barrier, which forms a second line of defense against water penetration, individual material components and the complete system to demonstrate durability. The use of mechanical fasteners is outside the scope of this document. In EIFS, the thermal insulation boards support the base coat with integral glass fibre reinforcing mesh. Systems where the reinforcement is the supporting element of the rendering, e.g. conventional stucco, are not covered by this document.
Thermal insulation products — Exterior insulation finish systems — Part 1: Materials
- ICS
- 91.100.60
- CCS
- 发布
- 2021-12-20
- 实施
This document specifies the requirements for factory-made aerogel blankets, which are used for the thermal insulation of building applications. This document specifies insulation that exhibits thermal insulating performance through high porosity and nano-sized pores by compounding aerogel with net- like fibrous material, e.g. polyester, glass fibre, ceramic fibre. The products are delivered as a blanket type. This document describes product characteristics and includes procedures for testing, evaluation of conformity and marking and labelling. This document does not specify the required level of a given property to be achieved by a product to demonstrate fitness for purpose in a particular application.
Thermal insulation products — Aerogel blanket for buildings — Specification
- ICS
- 91.100.60
- CCS
- 发布
- 2021-12-09
- 实施
本标准适用于新建、扩建、改建的民用建筑外墙内保温工程的设计、施工与验收。既有建筑的改造和工业建筑在技术条件相同时也可适用。
Application technical standard of YY silica rock insulation board exterior wall interior insulation system
- ICS
- 91.100.60
- CCS
- E4790
- 发布
- 2021-11-26
- 实施
- 2021-12-06
BS ISO 16478. Thermal insulation products. Vacuum insulation panels (VIPs). Specification
- ICS
- 91.100.60
- CCS
- 发布
- 2021-11-24
- 实施
- 2021-11-24
lnorganic porous thermal insulation materials
- ICS
- 91.100.60
- CCS
- 发布
- 2021-11-22
- 实施
主要技术内容包括：总则、术语、基本规定、性能要求、设计、施工和验收。
Technical specification for application of inorganic plasticized microporous insulation board
- ICS
- 91.100.60
- CCS
- E4710
- 发布
- 2021-11-12
- 实施
- 2021-11-17
本文件适用于江苏省抗震设防烈度8度及以下地区的新建钢筋混凝土结构民用建筑中，采用城乡污泥（淤泥）烧结节能砖自保温墙体系统的设计、施工及验收
Application specification for urban and rural sludge (silt) sintered energy-saving brick self-insulating wall system
- ICS
- 91.100.60
- CCS
- Q 15
- 发布
- 2021-11-04
- 实施
- 2021-12-04
BS EN 13496. Thermal insulation products for building applications. Determination of the mechanical properties of glass fibre meshes as reinforcement for External Thermal Insulation Composite Systems with renders (ETICS)
- ICS
- 91.100.60
- CCS
- 发布
- 2021-10-28
- 实施
- 2021-10-28
生产企业应对生产秸秆生态轻质隔墙条板用的秸秆植物纤维进行质量检验，并对主要原材料的性能进行定期复检。生产秸秆生态轻质隔墙条板的胶凝材料、粉煤灰、硅藻土、水等应符合相应的国家标准、行业标准的相关规定。秸秆植物纤维含水率应不大于 15%，含沙量应符合 GB/T 17431.1 的规定，不应霉变。秸秆生态轻质隔墙条板中秸秆的重量占比应不小于 10%。通用硅酸盐水泥应符合 GB 175 的规定。硫铝酸盐水泥应复合 JC 714 的规定。镁质胶凝材料应符合 JC/T 449 的规定。秸秆生态轻质隔墙条板外观质量应符合表2的规定。 表 2 外观质量 序号 项目(mm) 指标 1 板的横向、纵向、厚度方向贯通裂 无 2 板面裂缝，长度50～100，宽度0.5～1.0 ≤2处/板 3 缺棱掉角，宽度×长度10×25～20×30 ≤2处/板 4 大面凹陷，直径不大于120，深度不大于10 ≤2处/板 5 蜂窝气孔，直径8～20,深度不大于3 ≤2处/板 秸秆生态轻质隔墙条板尺寸允许偏差应符合表3的规定。 表 3 尺寸允许偏差 (mm) 序号 项目 指标 1 长度 ±4 2 宽度 ±2 3 厚度 ±2 4 板面表面平整度 ≤2 5 对角线差 ≤L/600 6 侧向弯曲 ≤L/1000 7 壁厚 （空心） ≥15 秸秆生态轻质隔墙条板理化性能应符合表4的规定。 表 4 理化性能 序号 项目 性能指标 板厚90mm 板厚100mm 板厚120mm 1 抗冲击性能 经5次抗冲击试验后，板面无裂纹 2 含水率/% ≤10 3 面密度/（kg/m2） ≤90 ≤100 ≤110 4 抗弯承载（板自重倍数） ≥1.5 5 抗压强度/MPa ≥3.5 6 抗折破坏荷载/N ≥3000 7 软化系数 ≥0.80 8 干燥收缩值/（mm/m） ≤0.40 9 吊挂力/N 荷载1000N 静置24h，板面无宽度超过0.5mm 的裂缝 10 导热系数(实心墙板)/W/(m.k) ≤0.25 11 空气声隔声量/dB ≥40 ≥45 12 调湿性能 吸湿量wa，（1×10—3kg/m2） 24h吸湿量wa≥40 放湿量wb，（1×10—3kg/m2） 24h放湿量wb≥wa×70% 13 燃烧性能 A级 14 耐火极限/h ≥1 15 氯离子含量/% ≤1 16 抗返卤性能 无水珠、无返潮 17 放射性核素限量 内照射指数 ≤1.0 外照射指数 ≤1.0
Straw ecological lightweight partition wall slats for construction
- ICS
- 91.100.60
- CCS
- A011
- 发布
- 2021-10-26
- 实施
- 2021-10-26
Double skin metal faced insulating panels - Factory made products - Specifications - Part 2: Structural applications - Fixings and potential uses of stabilization of individual structural elements
- ICS
- 91.100.60
- CCS
- 发布
- 2021-10-01
- 实施
- 2021-10-01
Factory-made double skin metal faced insulating sandwich panels - Part 3: Test methods for determining mechanical strength, building physical behaviour and durability
- ICS
- 91.100.60
- CCS
- 发布
- 2021-10-01
- 实施
- 2021-10-01
Thermal insulation products for buildings - Factory-made vacuum insulation panels (VIP) - Specification
- ICS
- 91.100.60
- CCS
- 发布
- 2021-10-01
- 实施
- 2021-10-01
Factory-made double skin metal faced insulating sandwich panels - Part 4: Test methods for fixing of panels to substructure and for determining restraining effect on substructure
- ICS
- 91.100.60
- CCS
- 发布
- 2021-10-01
- 实施
- 2021-10-01
Thermal insulation products for building applications - Determination of the mechanical properties of glass fibre meshes as reinforcement for External Thermal Insulation Composite Systems with renders (ETICS)
- ICS
- 91.100.60
- CCS
- 发布
- 2021-10-00
- 实施
1.DP预应力混凝土管桩（简称：DP管桩）适用于抗震设防烈度7度丙类和乙类的工业与民用建筑物、构筑物等工程的低承台桩基础工程。铁路、公路与桥梁、港口、水利、市政等采用低承台桩基础，在技术条件相同时也可采用。 2.DP管桩适用于主要承受竖向受压，受拉的低承台桩基础。当用作承受较大水平荷载桩基础工程时，应进行专项设计及验算。 3.遇有液化土层时，DP管桩的选用应符合《建筑桩基技术规范》JGJ 94的规定。 4.A型桩的选用应符合本市相关标准和规定的要求。
DP prestressed concrete pipe pile
- ICS
- 91.100.60
- CCS
- E509
- 发布
- 2021-09-30
- 实施
- 2021-10-12
Thermal insulation products of buildings -- In-situ formed products from loose-fill expanded polystyrene (EPS) beads and bonded expanded polystyrene beads -- Part 1: Specification for the bonded and loose-fill products before installation
- ICS
- 91.100.60
- CCS
- 发布
- 2021-09-28
- 实施
- 2021-09-28
