93.100 铁路建筑 标准查询与下载
共找到 648 条与 铁路建筑 相关的标准，共 44 页
BS EN 13231-1. Railway applications. Infrastructure. Acceptance of works. - Part 1. Works on ballasted track. Plain line, switches and crossings
- ICS
- 93.100
- CCS
- 发布
- 2022-09-22
- 实施
- 2022-09-22
This document is applicable to fastening systems, in Categories A - E as specified in EN 13481-1:2012, 3.1, for use on rectilinear steel sleepers in ballasted track with maximum axle loads and minimum curve radii in accordance with Table 1. [Table 1 - Fastening category criteria] NOTE The maximum axle load for Categories A and B does not apply to maintenance vehicles. The requirements apply to: - fastening systems which act on the foot and/or web of the rail including direct fastening systems and indirect fastening systems; - fastening systems for rail sections included in EN 13674-1 (excluding 49E4) or EN 13674-4. This document is not applicable to fastening systems for other rail sections, rigid fastening systems, special fastening systems used at bolted joints or glued joints or special low clamping force fastenings used to mitigate track-bridge interaction effects. This document is for type approval of complete fastening systems.
Railway applications - Track - Performance requirements for fastening systems - Part 4: Fastening systems for steel sleepers in ballast
- ICS
- 93.100
- CCS
- 发布
- 2022-07-13
- 实施
- 2022-10-31
This document is applicable to fastening systems in Categories A - E as specified in EN 13481-1:2012, 3.1 for use in switches and crossings (S&C). It also provides guidance on evaluating fastening systems for check rails, expansion devices and insulated rail joints whether in switches and crossings or in plain line. The document applies to five categories of fastenings used in tracks with respective maximum axle loads and minimum curve radii as shown in Table 1. [Table 1 - Fastening category criteria] NOTE 1 The maximum axle load for Categories A and B does not apply to maintenance vehicles. NOTE 2 The minimum curve radius is not applicable to applications in switches and crossings. The requirements apply to fastening systems for rail sections included in the EN 13674 series of standards (excluding 49E4). This document is not applicable to fastening systems for other rail sections or rigid fastening systems used on running rails. This document is for type approval of complete fastening systems.
Railway applications - Track - Performance requirements for fastening systems - Part 7: Fastening systems for switches and crossings, check rails, insulated rail joints and rail expansion devices
- ICS
- 93.100
- CCS
- 发布
- 2022-07-13
- 实施
- 2022-10-31
This document is applicable to fastening systems, in Categories A - E as specified in EN 13481-1:2012, 3.1 for use on wood or polymeric composite sleepers in ballasted or ballastless track, including track on open deck bridges, with respective maximum axle loads and minimum curve radii as shown in Table 1. [Table 1 - Fastening category criteria] NOTE The maximum axle load for Categories A and B does not apply to maintenance vehicles. The requirements apply to: - fastening systems that act on the foot and/or web of the rail including direct fastening systems and indirect fastening systems; - fastening systems for rail sections included in EN 13674-1:2011+A1:2017 (excluding 49E4) or EN 13674-4:2019. This document is not applicable to fastening systems for other rail sections, rigid fastening systems, special fastening systems used at bolted joints or glued joints or special low clamping force fastenings used to mitigate track-bridge interaction effects. This document is for type approval of complete fastening systems.
Railway applications - Track - Performance requirements for fastening systems - Part 3: Fastening systems for wood and polymeric composite sleepers
- ICS
- 93.100
- CCS
- 发布
- 2022-07-13
- 实施
- 2022-10-31
BS EN 16272-6. Railway applications. Infrastructure. Noise barriers and related devices acting on airborne sound propagation. Test method for determining the acoustic performance - Part 6. Intrinsic characteristics. In situ values of airborne…
- ICS
- 93.100
- CCS
- 发布
- 2022-02-17
- 实施
- 2022-02-17
BS EN 16272-3-1. Railway applications. Infrastructure. Noise barriers and related devices acting on airborne sound propagation. Test method for determining the acoustic performance - Part 3-1. Intrinsic characteristics. Normalized railway noise…
- ICS
- 93.100
- CCS
- 发布
- 2022-02-17
- 实施
- 2022-02-17
BS EN 16272-2. Railway applications. Infrastructure. Noise barriers and related devices acting on airborne sound propagation. Test method for determining the acoustic performance - Part 2. Intrinsic characteristics. Airborne sound insulation in…
- ICS
- 93.100
- CCS
- 发布
- 2022-02-17
- 实施
- 2022-02-17
BS EN 16272-1. Railway applications. Infrastructure. Noise barriers and related devices acting on airborne sound propagation. Test method for determining the acoustic performance - Part 1. Intrinsic characteristics. Sound absorption in the…
- ICS
- 93.100
- CCS
- 发布
- 2022-02-17
- 实施
- 2022-02-17
BS EN 16272-3-2. Railway applications. Infrastructure. Noise barriers and related devices acting on airborne sound propagation. Test method for determining the acoustic performance - Part 3-2. Normalized railway noise spectrum and single number…
- ICS
- 93.100
- CCS
- 发布
- 2022-02-17
- 实施
- 2022-02-17
BS EN 16272-5. Railway applications. Infrastructure. Noise barriers and related devices acting on airborne sound propagation. Test method for determining the acoustic performance - Part 5. Intrinsic characteristics. Sound absorption under…
- ICS
- 93.100
- CCS
- 发布
- 2022-02-17
- 实施
- 2022-02-17
本文件适用于流域性、区域性水利工程水旱灾害防御调度方案的编制，其他水利工程调度方案的编制可参照执行
Specifications for preparation of flood and drought disaster prevention and dispatching schemes
- ICS
- 93.100
- CCS
- P 55
- 发布
- 2021-12-31
- 实施
- 2022-01-31
1.明确了本规程的编制目的、适用范围，规定了铁路桥梁在应用桩基后压浆技术时设计、施工、验收中应遵循的主要原则和执行标准。 2.明确了铁路桥梁灌注桩后压浆设计、施工时应满足的基本要求。 3.明确了铁路桥梁灌注桩后压浆桩承载力、压浆管路系统构造要求、压浆材料的配比要求、压浆量和压浆压力估算公式的计算方法。 4.明确了铁路桥梁灌注桩后压浆的压浆设备及压浆管路布设要求，压浆施工方法、施工顺序、施工资料要求，后压浆安全和环境保护要求，规定了后压浆施工控制要求。 5.明确了铁路桥梁后压浆桩的检测方法和验收要求。
Technical Specification for Post-grouting of Cast-in-place Pile of Railway Bridge
- ICS
- 93.100
- CCS
- E481
- 发布
- 2021-12-21
- 实施
- 2021-12-31
1. 总则中规定了编制目的、适用范围和执行本规程的基本原则。 2. 基本规定中明确了纤维和纤维混凝土的材料性能、技术要求及其检验标准；规定材料性能应满足且不低于铁路工程各领域建设应用材料的强度和耐久性要求；规定了结构或构件设计的基本原则。 3. 桥梁工程中规定了纤维混凝土在桥梁工程中的适用范围；明确了桥面防护层、各类沟盖板和人行道步板等的设计、施工和质量检验等内容。 4. 隧道工程中规定了纤维混凝土在隧道工程中的适用范围；明确了喷射纤维混凝土衬砌、模筑纤维混凝土衬砌和预制纤维混凝土管片的设计、施工和质量检验等内容。 5. 轨道工程中规定了纤维混凝土在轨道工程中的适用范围；明确了轨下预制构件和现浇结构的设计、施工和质量检验等内容。 6. 路基工程中规定了纤维混凝土的适用范围，明确了各类挡土墙、挡土墙墙面板、路基面混凝土防水层、路堑的实体护坡、喷射混凝土护坡等的设计、施工以及验收标准等内容。
Technical Specification for Fiber Reinforced Concrete Structures of Railway Engineering
- ICS
- 93.100
- CCS
- E481
- 发布
- 2021-12-21
- 实施
- 2021-12-31
This European Standard defines the activities related to work on or near the railway track and the associated competence profiles of persons who carry out these activities and defines procedures for assessing the competence.
Railway applications - Track - Safety protection on the track during work - Part 3: Competences for personnel related to work on or near tracks; German version EN 16704-3:2016+A1:2021
- ICS
- 93.100
- CCS
- 发布
- 2021-12-00
- 实施
Railway applications. Ballastless track systems. Acceptance
- ICS
- 93.100
- CCS
- 发布
- 2021-11-04
- 实施
- 2021-11-04
Railway applications - Ballastless track systems - Part 3: Acceptance
- ICS
- 93.100
- CCS
- 发布
- 2021-11-00
- 实施
Railway applications – Track – Safety protection on the track during work – Part 1: Railway risks and common principles for protection of fixed and mobile work sites
- ICS
- 93.100
- CCS
- 发布
- 2021-10-22
- 实施
- 2021-10-22
Railway applications – Track – Safety protection on the track during work – Part 3: Competences for personnel related to work on or near tracks
- ICS
- 93.100
- CCS
- 发布
- 2021-10-22
- 实施
- 2021-10-22
Railway applications - Track - Safety protection on the track during work - Part 3: Competences for personnel related to work on or near tracks
- ICS
- 93.100
- CCS
- 发布
- 2021-10-00
- 实施
