97.170 人体保健器具 标准查询与下载

IEC 60335-2-8:2022 CMV 家用和类似用途电器.安全.第2-8部分:剃须刀、理发器和类似器具的特殊要求

Household and similar electrical appliances - Safety - Part 2-8: Particular requirements for shavers, hair clippers and similar appliances

EN IEC 61855:2022 家用和类似用途的头发护理器具性能测量方法

IEC 61855:2022 applies to electrical appliances for household and similar use for drying and styling hair (including their accessories). This document defines the main performance characteristics that are of interest to the user and specifies methods of measuring these characteristics. Appliances to which this document applies include: – Hair dryers; – Hair curlers; – Hair straighteners. This document does not specify the requirements for performance. This document does not deal with safety requirements (IEC 60335-2-23). This document does not apply to electric hair clippers or trimmers. This second edition cancels and replaces the first edition published in 2003. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) the definitions of hair dryers, hair curlers and hair straighteners are updated; b) the measurement of temperature profile of the outlet air of hair dryers is added; c) the measurement of temperature profile of the whole work area of hair curlers is added; d) the measurement of temperature profile of the heating plate of hair straighteners is added; e) the measurement method for air flow of hair dryers is introduced; f) the measurement method for anion emission concentration of anion hair dryers is introduced; g) the measurement method for tension of hair straighteners is introduced; h) the service life test for hair dryers, hair curlers and hair straighteners is introduced.

Household and similar use electrical hair care appliances - Methods for measuring the performance

KS C IEC 61254-2022 家用电动剃须刀性能测定方法

Electric shavers for household use－Methods for measuringthe performance

KS C IEC 60704-2-8-2022 家用和类似用途电器空气噪声测定试验规范第2部分：电动剃须刀的特殊要求

Household and similar electrical appliances－Test code for the determination of airborne acoustical noise Part 2：Particular requirements for electric shavers

T/QGCML 337-2022 气泡水疗浴设备

本文件规定了气泡水疗浴设备的术语和定义、型号、组成及基本参数、要求、试验方法、检验规则以及标志、包装、运输和贮存。 本文件适用于沐浴、足浴用及其他形式使用的气泡水疗浴设备。

Bubble spa equipment

IEC 61855:2022 家用和类似用途的头发护理器具性能测量方法

Household and similar use electrical hair care appliances - Methods for measuring the performance

T/CDZX 007-2022 纹绣用圆针、针片

用针丝制成直径为0.10mm～1.0mm，针尖长度为1mm～10mm，针长为5mm～100mm的平针片、圆针和多层针片，适用于纹绣教学、技能培训、可做纹眉、纹绣、纹身等所用的不锈钢针片、圆针和多排针片。主要技术在于合理采用客户的要求，高精度制成成型针片。

Round needles and needle pieces for embroidery

T/CPQS E00026-2022 微电流按摩器

本文件规定了带有USB接口的充电式微电流按摩器的范围、术语和定义、技术要求、试验方法、检验规则、标志与说明、包装、运输、贮存。

Microcurrent massagers

T/CPQS E00027-2022 一次性蒸汽眼罩

本文件规定了一次性蒸汽眼罩的范围、术语和定义、技术要求、试验方法、检验规则、标识、运输、贮存。

Disposable steam eye mask

T/CHBA 002-2022 生活美容射频类美体设备

本文件规定了生活美容射频类美体设备的术语和定义、技术要求、检验方法、检验规则以及标志、使用说明、包装、运输和贮存。

Radio frequency body beautifying equipment for life beauty

T/CHBA 001-2022 生活美容射频类美肤设备

本文件规定了生活美容射频类美肤设备的术语和定义、技术要求、检验方法、检验规则以及标志、使用说明、包装、运输和贮存。

Radio frequency skin beautifying equipment for life beauty

GSO ISO 20127:2022 牙科 电动牙刷的物理特性

This document specifies requirements and test methods for the physical properties of powered toothbrushes in order to promote the safety of these products for their intended use. There are different technologies of powered toothbrushes. Common features of those powered toothbrushes to which this document applies are: — a battery; — a motor; — a mechanical or magnetic drive system; — a moving brush head with tufted filaments. Powered toothbrushes can have a moving brush head with different motions (e.g. oscillating-rotating, side-by-side), frequencies and velocities. The requirements listed in this document apply to all types of powered toothbrushes. However, there is a possibility that some requirements are not applicable for all types, for example brush head plate retention can only be applied if the brush has a head portion that might get detached from the brush shaft. This document is not applicable to other types of powered oral hygiene devices (such as powered interdental brushes) or manual toothbrushes.

Dentistry — Physical properties of powered toothbrushes

T/CSTE 0020-2022 “领跑者”标准评价要求 按摩椅

4.2 评价指标分类 4.2.1 按摩椅 “领跑者”标准的评价指标包括基础指标、核心指标和创新性指标。 4.2.2 基础指标包括安全、电磁兼容、关机功率、待机功率的相关要求。 4.2.3 核心指标包括性能、噪声。 4.2.4 核心指标分为先进水平、平均水平和基准水平共三个等级，先进水平相当于企业标准排行榜中 5 星级水平；平均水平相当于企业标准排行榜中 4 星级水平；基准水平相当于企业标准排行榜中 3 星级水 平。4.2.5 创新性指标为智能化水平评价，鼓励根据条件成熟情况适时增加与产品性能和消费者关注的相关 创新性指标。

Assessment requirements for forerunner standard - Massage chairs

T/CSTE 0012-2022 “领跑者”标准评价要求 毛球修剪器

4.2 评价指标分类 4.2.1 毛球修剪器产品 “领跑者”标准的评价指标包括基础指标、核心指标。 4.2.2 基础指标包括安全、 电磁兼容、噪音的相关要求。 4.2.3 核心指标包括转速、锋利度、无故障工作时间、充满电后工作时间。 4.2.4 核心指标分为先进水平、平均水平和基准水平共三个等级，先进水平相当于企业标准排行榜中 5 星级水平；平均水平相当于企业标准排行榜中 4 星级水平；基准水平相当于企业标准排行榜中 3 星级水平。

Assessment requirements for forerunner standard - Hair ball trimmers

T/CSTE 0011-2022 “领跑者”标准评价要求 电动剃须刀

4.2.1 电动剃须刀产品 “领跑者”标准的评价指标包括基础指标、核心指标和创新性指标。 4.2.2 基础指标包括安全、电磁兼容、噪声的相关要求。 4.2.3 核心指标包括额定转速、刀网的温升、锋利度、无故障工作时间、充满电后工作时间。 4.2.4 核心指标分为先进水平、平均水平和基准水平共三个等级，先进水平相当于企业标准排行榜中 5 星级水平；平均水平相当于企业标准排行榜中 4 星级水平；基准水平相当于企业标准排行榜中 3 星级水 平。4.2.5 创新性指标为抗菌功能，鼓励根据条件成熟情况适时增加与产品性能和消费者关注的相关创新性 指标

Assessment requirements for forerunner standard - Electric shavers

BS EN ISO 20126:2022 牙科 手动牙刷 一般要求和测试方法

What is ISO 20126- Requirements and test methods for manual toothbrushes about? ISO 20126 is an international standard on dentistry that discusses the requirements and test methods for manual toothbrushes to ensure all the toothbrush components are safe for use in the mouth. ISO 20126 specifies requirements and test methods for the physical properties of manual toothbrushes to promote the safety of these products for their intended use. Note1: ISO 20126 does not specify any requirements and test methods for the physical properties of toothbrushes for which all the cleaning elements in the head are elastomer. Note2: ISO 20126 does not apply to manual single tuft toothbrushes or single-use, interdental and powered oral hygiene devices. These types of oral hygiene products are evaluated for their safety in-use by appropriate test methods or clinical trials. Note3: For the filament, manual toothbrushes are evaluated for their safety in use by appropriate test methods or clinical trials end-rounding requirements, ISO 20126 does not apply to filament types that are very thin (less than 0,1 mm outside diameter) or have no sharp edges (e.g., tapered, feathered, with split tips, or spherical cap) or non-synthetic filaments, where applying end-rounding process is inappropriate or impossible. These manual toothbrushes are evaluated for their safety in-use by appropriate test methods ...

Dentistry. Manual toothbrushes. General requirements and test methods

T/NDAS 56-2022 按摩器具用印制板技术规范

规定了按摩器具用印制板的标记、外观、材料特性、拉脱强度的要求。

Technical specification for printed boards for massagers

EN ISO 20126:2022 牙科学.手动牙刷.一般要求和试验方法

This document specifies requirements and test methods for the physical properties of manual toothbrushes in order to promote the safety of these products for their intended use. This document does not specify any requirements and test methods for the physical properties of toothbrushes for which all the cleaning elements in the head are elastomer. This document does not apply to manual single tuft toothbrushes, single use, interdental and powered oral hygiene devices. These types of oral hygiene products are evaluated for their safety in-use by appropriate test methods or clinical trials. In addition, for the filaments end-rounding requirements, this document does not apply to particular filament types which are very thin (less than 0,1 mm outside diameter) or have no sharp edges (e.g. tapered, feathered, with split tips, or spherical cap) or non-synthetic filaments, where applying end-rounding process is inappropriate or impossible. These types of manual toothbrushes are evaluated for their safety in-use by appropriate test methods or clinical trials appropriately.

Dentistry - Manual toothbrushes - General requirements and test methods (ISO 20126:2022)

ISO 20126:2022 牙科学.手动牙刷.一般要求和试验方法

This document specifies requirements and test methods for the physical properties of manual toothbrushes in order to promote the safety of these products for their intended use. This document does not specify any requirements and test methods for the physical properties of toothbrushes for which all the cleaning elements in the head are elastomer. This document does not apply to manual single tuft toothbrushes, single use, interdental and powered oral hygiene devices. These types of oral hygiene products are evaluated for their safety in-use by appropriate test methods or clinical trials. In addition, for the filaments end-rounding requirements, this document does not apply to particular filament types which are very thin (less than 0,1 mm outside diameter) or have no sharp edges (e.g. tapered, feathered, with split tips, or spherical cap) or non-synthetic filaments, where applying end- rounding process is inappropriate or impossible. These types of manual toothbrushes are evaluated for their safety in-use by appropriate test methods or clinical trials appropriately.

Dentistry — Manual toothbrushes — General requirements and test methods

T/GDBCA 002-2022 超纳微晶美容美肤仪

超纳微晶美容美肤仪的技术内容：本标准的主要技术内容为：超纳微晶美容仪主要包括外观要求及外壳温升、性能要求；超纳微晶美肤仪主要包括外观要求及外壳温升、性能要求、电气安全要求等。

Super Nano Microcrystalline Beauty and Skin Beautification Instrument