97.190 儿童用器具 标准查询与下载

DS/EN 13210-1:2020 儿童保育用品《第1部分：儿童背带、缰绳》安全要求及试验方法

Child care articles – Part 1: Children's harnesses, reins – Safety requirements and test methods

DS/EN 13210-2:2020 儿童保育用品《第2部分：结合背包和缰绳的儿童背带》安全要求和试验方法

Child care articles – Part 2: Children's harnesses incorporating backpacks and reins – Safety requirements and test methods

ASTM F3084-20 婴儿/幼儿摇摆器的标准消费者安全规范

Standard Consumer Safety Specification for Infant and Infant/Toddler Rockers

T/QGCML 019-2020 儿童手推车生产流程规范

本标准规定了儿童手推车的材料要求、生产流程、包装和检验等规范。 本标准适用于生产儿童手推车的企业。

Specifications for the production process of children's trolleys

ASTM F3343-20 婴儿沐浴器消费者安全标准规范

Standard Consumer Safety Specification for Infant Bathers

ASTM F2088-20 婴儿和摇篮秋千的消费者安全标准规范

Standard Consumer Safety Specification for Infant and Cradle Swings

ASTM F3343-20e1 婴儿沐浴器消费者安全标准规范

1.1 This consumer safety specification establishes performance requirements, test methods, and labeling requirements to promote the safe use of infant bathers. 1.2 This consumer safety specification is intended to reduce the risk of death and minimize injury to infants resulting from use and reasonably foreseeable misuse or abuse of infant bathers. 1.3 No infant bather produced after the approval date of this consumer safety specification shall, either by label or other means, indicate compliance with this specification unless it conforms to all requirements contained herein. 1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.5 The following precautionary caveat pertains only to the test method portion, Section 7, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Consumer Safety Specification for Infant Bathers

20/30411136 DC BS EN 1466 儿童使用和护理用品 携带婴儿床和支架 安全要求及测试方法

BS EN 1466. Child use and care articles. Carry cots and stands. Safety requirements and test methods

18/30375148 DC BS EN 1466 儿童使用和护理用品 携带婴儿床和支架 安全要求及测试方法

BS EN 1466. Child use and care articles. Carry cots and stands. Safety requirements and test methods

KS G 3317-2019 婴儿三轮车

Baby tricycle

KS G 3316-2019 婴儿车

Baby carriage

ASTM F2710-19 商业婴儿床的标准消费者安全性能规范

1.1 This consumer safety performance specification establishes performance requirements, test methods, and marking requirements to promote the safe use of cribs in commercial environments such as hotels, rentals, motels, and child care centers and the like. 1.2 This consumer safety performance specification subsumes the federal and ASTM standards which are in existence for these types of product when those products are used in non-commercial applications. 1.3 This consumer safety performance specification includes products intended to provide a safe sleeping environment such as full size cribs, non-full size cribs, and play yards and includes both rigid and mesh sided units. The term “crib” as used in this standard includes all of these items. 1.4 Products such as bassinets and cradles are specifically excluded from this consumer safety performance specification. 1.5 No commercial crib produced after the approval date of this consumer safety performance specification shall, either by label or other means indicate compliance with this specification unless it conforms to all applicable requirements contained herein, before and after all testing. 1.6 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.7 The following precautionary caveat pertains only to the test methods portion, Section 6, of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.8 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Consumer Safety Performance Specification for Commercial Cribs

ASTM F3343-19a 婴儿沐浴器消费者安全标准规范

Standard Consumer Safety Specification for Infant Bathers

ASTM F2088-19 婴儿秋千的消费者安全标准规范

Standard Consumer Safety Specification for Infant Swings

ASTM F2085-19 便携式床轨的消费者安全标准规范

1.1 This consumer safety specification establishes requirements for the performance of portable bed rails. It also contains requirements for labeling and instructional literature. This consumer safety specification does not cover guardrails that fall under the scope of Consumer Safety Specification F1821 or guardrails that are designed for a specific model of bed and which attaches at the headboard or footboard. 1.2 This consumer safety specification is intended to minimize hazards to children resulting from normal use and reasonably foreseeable misuse of portable bed rails. 1.3 For the purpose of this consumer safety specification, a portable bed rail is a device intended to be installed on an adult bed to prevent children from falling out of bed. These bed rails are intended for children who can get in and out of an adult bed unassisted (typically from 2 to 5 years of age). 1.4 No bed rail as defined in 3.1.1 that is produced after the approval date of this consumer safety specification shall, either by label or other means, indicate compliance with this specification unless it conforms to all the requirements contained herein. 1.5 This consumer safety specification includes the following sections: Title Section Scope 1 Referenced Documents 2 Terminology 3 Calibration and Standardization 4 General Requirements 5 Performance Requirements 6 Structural Integrity 6.1 Openings 6.2 Enclosed Openings 6.3 Openings Created by Bed Rail Displacement of Adjacent Style Portable Bed Rails 6.4 Openings Created by Displacement of Mattress-Top Portable Bed Rails 6.5 Openings Created by Displacement of Portable Bed Rails Intended for Use on Specific Manufacturers’ Beds 6.6 Protrusions 6.7 Openings Between Bedposts (Headboard, Footboards, Etc.) and Ends of Portable Bed Rail 6.8 Bedrail components requiring consumer assembly 6.9 Test Equipment 7 Test Beds 7.1 Torso Probe 7.2 Wedge Probe 7.3 Ring Gauge 7.4 Weight Gauge 7.5 Force Gauge 7.6 Test Methods 8 1 This consumer safety specification is under the jurisdiction of ASTM Committee F15 on Consumer Products and is the direct responsibility of Subcommittee F15.11 on Bed Rails. Current edition approved Nov. 1, 2019. Published November 2019. Originally approved in 2001. Last previous edition approved in 2019 as F2085 – 12 (2019). DOI: 10.1520/F2085-19. Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. 1 Test Method for Structural Integrity 8.1 Test Method for Enclosed Openings Within Portable Bed Rail 8.2 Test Method for Displacement of Adjacent Style Portable Bed Rails 8.3 Test Method for Displacement of 9Mattress-Top9 Style Portable Bed Rails 8.4 Test Method for Portable Bed Rails Intended for Use on a Specific Manufacturer’s Bed 8.5 Test Method for Entanglement on Protrusions 8.6 Marking and Labeling 9 Permanency of Labels and Warnings 10 Instructional Literature 11 Keywords 12 Rationale Appendix X1 1.6 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.7 The following precautionary caveat pertains only to the test methods portion in Section 8 of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory requirements prior to use. 1.8 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Consumer Safety Specification for Portable Bed Rails

T/ZZB 1273-2019 两轮儿童自行车

本标准规定了两轮儿童自行车的术语和定义、基本要求、技术要求、试验方法、检验规则、标志和使用说明、包装、运输和贮存、质量承诺等内容。 本标准适用于鞍座高度为435 mm～635mm、由后轮驱动、4～8岁年龄段儿童骑行的两轮儿童自行车。

Young children's bicycles with two wheels

EN 14960-2:2019 充气游乐设备 第2部分：用于永久安装的充气弹跳枕头的附加安全要求

This part of EN 14960 specifies additional safety requirements for inflatable bouncing pillows intended for permanent installation. This part of EN 14960 is applicable to inflatable play equipment intended for use by children fourteen years and under, both individually and collectively. This part of EN 14960 specifies safety requirements for inflatable play equipment for which the primary activity is bouncing. It sets measures to address risks and also to minimize accidents to users for those involved in the design, manufacture and supply of inflatable play equipment. It specifies information to be supplied with the equipment. The requirements have been laid down bearing in mind the risk factor based on available data. This part of EN 14960 specifies the requirements that will protect a child from hazards that he or she might be unable to foresee when using the equipment as intended, or in a manner that can be reasonably anticipated. This part of EN 14960 is not applicable to inflatables dealt with in EN 14960 1:2019, inflatable water-borne play and leisure equipment, domestic inflatable toys, air-supported buildings, inflatables used solely for protection, inflatables used for rescue, or other types of inflatable toys where the primary activity is not bouncing or sliding.

Inflatable play equipment - Part 2: Additional safety requirements for inflatable bouncing pillows intended for permanent installation

ASTM F2951-19 婴儿监视器的消费者安全标准规范

1.1 This consumer safety specification establishes requirements for corded baby monitors, including audio monitors, video monitors, and motion sensor monitors. It also provides requirements for labeling, instructional material and packaging. 1.1.1 This consumer safety specification is intended to minimize injuries to children resulting from normal usage and reasonably foreseeable misuse or abuse of baby monitors. 1.2 No product produced after the approval date of this consumer safety specification shall, either by label or other means, indicate compliance with this specification unless it conforms to all applicable requirements contained herein, before and after all testing. 1.3 Units—The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Consumer Safety Specification for Baby Monitors

ASTM F1821-19e1 婴儿床标准消费者安全规范

Standard Consumer Safety Specification for Toddler Beds

ASTM F1821-19e2 幼儿床的消费者安全标准规范

1.1 This consumer safety specification covers requirements for the design and performance of toddler beds. It also contains requirements for labeling and instructional material. 1.2 This consumer safety specification is intended to minimize incidents to children resulting from normal use and reasonably foreseeable misuse of toddler beds. It does not address incidents resulting from alteration or unreasonable misuse. 1.3 For the purposes of this consumer safety specification, a toddler bed is a bed that is sized to accept a full-size crib mattress and is intended for use by a child not less than 15 months of age and who weighs no more than 50 lb (27.7 kg). 1.4 No toddler bed produced after the approval date of this consumer safety specification shall indicate compliance with this specification, either by label or by other means, unless it conforms to all the requirements contained herein. 1.5 This consumer safety specification includes the following sections: Scope Section 1 Referenced Documents Section 2 Terminology Section 3 Calibration and Standardization Section 4 General Requirements Section 5 Performance Requirement Section 6 Test Methods Section 7 Marking and Labeling Section 8 Instructional Literature Section 9 Keywords Section 10 1.6 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.7 The following safety hazards caveat pertains only to the test methods portion, Section 7, of this consumer safety specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.8 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the 1 This consumer safety specification is under the jurisdiction of ASTM Committee F15 on Consumer Products and is the direct responsibility of Subcommittee F15.18 on Cribs, Toddler Beds, Play Yards, Bassinets, Cradles and Baby Changing Products. Current edition approved June 1, 2019. Published July 2019. Originally approved in 1997. Last previous edition approved in 2018 as F1821 – 18. DOI: 10.1520/ F1821-19E02. Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. 1 Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Consumer Safety Specification for Toddler Beds