97.190 儿童用器具 标准查询与下载

ASTM F1004-19 扩展门和可扩展外罩的消费者标准安全规范

1.1 This consumer safety specification covers minimum safety performance requirements, test methods, and requirements for labeling and instructional material to minimize hazards to young children resulting from the normal use and reasonably foreseeable misuse and abuse of expansion gates and expandable enclosures. 1.2 Products known as expansion gates and expandable enclosures, or by any other name, which are in the scope of this consumer safety specification are intended for young children aged six months through 24 months, and are defined in Section 3. 1.3 Expansion gates and expandable enclosures defined in Section 3 are for domestic use and are not to be confused with other types of gates or enclosures that may be specifically designed for commercial, institutional, agricultural, pet use, or any other such use. 1.4 No expansion gate or expandable enclosure as defined in Section 3, that is, produced after the approval date of this consumer safety specification either by label or other means, shall indicate compliance with this specification unless it conforms to all the requirements contained herein. 1.5 For expediency, expansion gates and expandable enclosures as defined in Section 3 will heretofore be referred to in this consumer safety specification as “gates” and “enclosures” unless referred to definitively. 1.6 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.7 The following pertains only to the test methods portion, Section 7, of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.8 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the 1 This consumer safety specification is under the jurisdiction of ASTM Committee F15 on Consumer Products and is the direct responsibility of Subcommittee F15.16 on Highchairs, Hook-On Chairs and Expandable Gates. Current edition approved June 1, 2019. Published June 2019. Originally approved in 1986. Last previous edition approved in 2018 as F1004 – 18. DOI: 10.1520/F1004-19. Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. 1 Copyright ASTM International Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Consumer Safety Specification for Expansion Gates and Expandable Enclosures

ASTM F1821-19e2 幼儿床的消费者安全标准规范

1.1 This consumer safety specification covers requirements for the design and performance of toddler beds. It also contains requirements for labeling and instructional material. 1.2 This consumer safety specification is intended to minimize incidents to children resulting from normal use and reasonably foreseeable misuse of toddler beds. It does not address incidents resulting from alteration or unreasonable misuse. 1.3 For the purposes of this consumer safety specification, a toddler bed is a bed that is sized to accept a full-size crib mattress and is intended for use by a child not less than 15 months of age and who weighs no more than 50 lb (27.7 kg). 1.4 No toddler bed produced after the approval date of this consumer safety specification shall indicate compliance with this specification, either by label or by other means, unless it conforms to all the requirements contained herein. 1.5 This consumer safety specification includes the following sections: Scope Section 1 Referenced Documents Section 2 Terminology Section 3 Calibration and Standardization Section 4 General Requirements Section 5 Performance Requirement Section 6 Test Methods Section 7 Marking and Labeling Section 8 Instructional Literature Section 9 Keywords Section 10 1.6 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.7 The following safety hazards caveat pertains only to the test methods portion, Section 7, of this consumer safety specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.8 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the 1 This consumer safety specification is under the jurisdiction of ASTM Committee F15 on Consumer Products and is the direct responsibility of Subcommittee F15.18 on Cribs, Toddler Beds, Play Yards, Bassinets, Cradles and Baby Changing Products. Current edition approved June 1, 2019. Published July 2019. Originally approved in 1997. Last previous edition approved in 2018 as F1821 – 18. DOI: 10.1520/ F1821-19E02. Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. 1 Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Consumer Safety Specification for Toddler Beds

T/MBPA C001-2019 婴童饮用器具通用安全要求

本标准规定了婴童饮用器具的范围、术语和定义、卫生要求、物理要求、化学要求、测试方法和标识。

General safety requirements of drinking equipment for babies and children

T/CPQS MBPAC001-2019 婴童饮用器具通用安全要求

1. 卫生要求 2.物理要求 2.1 外观检查 2.2  容量标记和偏差 2.3  油墨附着力 2.4  耐热冲击温度性能 2.5  整体跌落强度 2.6  小零 2.7  抗扯性能 2.8  匹配部件 2.8.1  含有饮用突出物 2.8.2  含有吸管 2.9　密封垫片 2.10  保持力及柔软性 2.11  吸管 2.12  手柄或提环强度 3  化学要求 3.1  特定元素的迁移 3.2邻苯二甲酸酯含量 3.3 N-亚硝胺和可亚硝基化物质释放量 3.4  2-巯基苯并噻唑（MBT）释放量 3.5  抗氧化剂释放量 3.6  甲醛释放量 3.7  双酚A释放量 3.8  挥发性化合物含量

General safety requirements of drinking equipment for babies and children

T/CPQS MBPAC004-2019 婴儿斜躺床通用安全要求

1. 外观 2. 化学安全性能 2.1 特定迁移元素 2.2 邻苯二甲酸酯 2.3 可分解有害芳香胺染料 2.4 甲醛 3. pH值 4. 染色牢度 5. 燃烧性能 6. 危险夹缝 7. 剪切、切削和挤压 8.  锐利边缘和尖端 9.  小零件 10. 折叠机构 11. 防护部件 12. 裸露的弹簧线圈 13. 网孔或织物孔 14. 稳定性 16. 束缚系统 17. 倾斜角度 18. 头倾角度 19. 侧面高度 20. 两侧面保护 21. 头部、脚部和侧面保护 22. 静态强度 23. 动态强度 24. 靠背 25. 缠绕危险 26. 玩具及其他附件

General safety requirements for infant inclined beds

T/CPQS MBPAC003-2019 婴幼儿咀嚼辅食器通用安全要求

1. 原料要求 2. 外观质量 3. 物理要求 3.1 结构 3.2 小零件 3.3 形状模板 3.4 孔洞（手指夹陷） 3.5 密封性能 3.6 耐低温性能 3.7 跌落性能 3.8 抗冲击性能 3.9 抗刺穿性能 3.10 抗扯性能 3.11 咬扯耐久性能 3.12 拉力测试 3.13 卫生要求 4.化学要求 4.1 特定元素迁移 4.2 邻苯二甲酸酯含量 4.3 N-亚硝胺和N-亚硝基物质释放量 4.4 2-巯基苯并噻唑（MBT）释放量 4.5 抗氧化剂释放量 4.6 2，2-二（4-羟基苯基）丙烷[双酚A]（BPA）释放量 4.7 甲醛释放量 4.8 挥发性化合物含量 5. 食品接触材料及部件要求

General safety requirements of food feeder for babies

ASTM F2085-12(2019) 便携式床轨的消费者安全标准规范

Standard Consumer Safety Specification for Portable Bed Rails

ASTM F1967-19 婴儿浴室座椅的消费者安全标准规范

1.1 This consumer safety specification establishes performance requirements, test methods, and labeling requirements to promote the safe use of infant bath seats. Products commonly referred to as bath rings also are included in the scope of this specification. Traditional infant bath tubs that are used to bathe an infant are not within the scope of this standard. 1.2 This consumer safety specification is intended to reduce the risk of death and minimize injury to infants resulting from use and reasonably foreseeable abuse of infant bath seats. 1.3 No infant bath seat produced after the approval date of this consumer safety specification shall, either by label or other means, indicate compliance with this specification unless it conforms to all requirements contained herein. 1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.5 The following precautionary caveat pertains only to the test methods portion, Section 7, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Consumer Safety Specification for Infant Bath Seats

ASTM F2167-19 婴儿保镖座椅的消费者安全标准规范

1.1 This consumer safety specification covers establishment of requirements, test methods, and marking requirements to promote safe use of an infant bouncer seat by an occupant and a caregiver. 1.2 For purposes of this consumer safety specification, an infant bouncer seat is a freestanding product intended to support an occupant in a reclined position to facilitate bouncing by the occupant, with the aid of a caregiver or by other means. Intended occupants are infants who have not developed the ability to sit up unassisted (approximately 0 to 6 months of age). 1.3 This consumer safety specification is intended to minimize the risk of injury to an occupant resulting from normal use and reasonably foreseeable misuse or abuse of an infant bouncer seat. 1.4 No infant bouncer seat produced after the approval date of this consumer safety specification shall, either by label or other means, indicate compliance with this specification unless it conforms to all requirements contained herein. 1.5 This consumer safety specification is not intended to address incidents and injuries resulting from the interaction of other persons with the occupant in an infant bouncer seat or the incidents resulting from abuse or misuse by other children. 1.6 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.7 The following precautionary caveat pertains only to the test method portion, Section 7, of this consumer safety specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory requirements prior to use. 1.8 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Consumer Safety Specification for Infant Bouncer Seats

ASTM F833-19 汽车和婴儿车的标准消费者安全性能规范

1.1 This consumer safety specification establishes safety performance requirements, test methods, and labeling requirements to minimize the hazards to children presented by carriages and strollers as identified in the introduction. Children’s products such as tricycles, bicycles or other similar wheeled products that can be self-propelled by a child are not considered carriages or strollers subject to the requirements of this standard, even if the item has a temporary or permanent handle. 1.2 No carriage or stroller produced after the approval date of this consumer safety performance specification shall, either by label or other means, indicate compliance with this specification unless it conforms to all requirements herein. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 The following precautionary caveat pertains only to the test method portion, Section 7, of this consumer safety specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Consumer Safety Performance Specification for Carriages and Strollers

T/HBTJPA 001-2019 简易手推车（溜娃神器）通用技术条件 第1部分：技术要求

本标准规定了本公司设计、生产、外采及 OEM 简易手简易手推车（溜娃神器）的通用技术要求。 本标准适用于本公司设计、生产、外采及 OEM 产品的各类简易手推车（溜娃神器）。

General technical conditions for simple trolleys (artifacts for children) Part 1: Technical requirements

ASTM F3343-19 婴儿沐浴器消费者安全标准规范

Standard Consumer Safety Specification for Infant Bathers

19/30383811 DC BS EN 1930 儿童使用和护理用品 安全屏障 安全要求及测试方法

BS EN 1930. Child use and care articles. Safety barriers. Safety requirements and test methods

ASTM F2050-19 手持式婴儿车的消费者安全性能规范

1.1 This consumer safety specification establishes performance requirements, test methods, and marking requirements to promote safe use of a hand-held infant carrier by an occupant and caregiver. 1.2 This consumer safety specification is intended to minimize the risk of incidents to an occupant resulting from normal use and reasonably foreseeable misuse or abuse of a hand-held infant carrier. 1.3 No hand-held infant carrier produced after the approval date of this consumer safety specification, either by label or other means, shall indicate compliance with this specification, unless it conforms to all requirements contained herein. 1.4 This consumer safety specification is not intended to address accidents and injuries resulting from the interaction of other persons with the child occupant in a hand-held infant carrier or the accidents resulting from abuse and misuse by children able to walk. 1.5 This consumer safety specification is not intended to address incidents or injuries resulting from use of the product in a motor vehicle, nor is it intended to address any issues that may arise from the manufacturer meeting the certification requirements of 49 CFR 571.213 or other applicable add-on child restraint standards. 1.6 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.7 The following precautionary caveat pertains only to the test method portion, Section 7, of this consumer safety specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.8 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Consumer Safety Performance Specification for Hand-Held Infant Carriers

ASTM F2907-19 吊带架用户安全规范

1.1 This consumer safety specification establishes performance requirements, test methods and marking requirements to promote safe use of sling carriers. 1.2 This consumer safety specification is intended to minimize the risk of injury to an occupant from the normal use and reasonably foreseeable misuse of products. 1.3 For purposes of definition, a sling carrier is a product of fabric or sewn fabric construction, which is designed to contain up to two (2) children in an upright or reclined position while being supported by the caregiver’s torso. Sling carriers are normally used from full-term birth to 35 lb (15.9 kg) unless the manufacturer indicates that a higher weight limit is allowed. NOTE 1—Slings consist of a variety of unstructured designs ranging from a hammock-shaped product suspended on the caregiver’s upper torso to a long length of material wrapped around the caregiver’s body. 1.4 The sling carrier is normally “worn” by the caregiver, and thus the child is supported from one or both shoulders of the caregiver. These products are worn on the front, hip or back of the caregiver, with the child either facing towards or away from the caregiver or reclined on the front only of the caregiver. 1.5 No sling carrier produced after the approval date of this consumer safety specification shall, either by label or other means, indicate compliance with the specification unless it complies with all of the requirements contained herein. 1.6 This consumer safety specification is not intended to address incidents and injuries resulting from the interaction of other persons or objects with the caregiver and child while the sling carrier is in use. 1.7 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.8 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.9 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Consumer Safety Specification for Sling Carriers

BS EN 17022:2018 儿童护理用品 沐浴辅助用品 安全要求及测试方法

What is BS EN 17022 - Safety requirements and test methods for bathing aids about?    BS EN 17022 discusses the safety of bathing aids. BS EN 17022 specifies safety requirements and test methods for standalone bathing aids intended to be used in a bathtub.   Note1: BS EN 17022 does not cover bathing aids designed for children with special needs.  Note2: Bathing aids that are intended to be used only in conjunction with a child’s bathtub are not covered by BS EN 17022 .  Note3: Non-standalone bathing aids that are intended to be used only in conjunction with a child’s bathtub are covered in EN 17072:2018 , Child care articles - Bathtubs, stands, and non-standalone bathing aids — Safety requirements and test methods.  Who is BS EN 17022

Child care articles. Bathing aids. Safety requirements and test methods

T/GDAQI 002-2018 婴幼儿用奶瓶奶嘴

本标准规定了婴幼儿用奶瓶和奶嘴的术语和定义、要求、试验方法、检验方法、包装标识、运输和贮存。

Baby bottle and pacifier

T/ZZB 0921-2018 高景观可旋转儿童推车

本标准规定了高景观可旋转儿童推车的术语和定义、基本要求、技术要求、试验方法、检验规则、标志、包装、运输和贮存、质量承诺。 本标准适用于0-3岁高景观可旋转儿童推车。 本标准不适用于玩具推车。

High landscape rotary child trolley

T/ZZB 0918-2018 推骑两用儿童三轮车

本标准规定了推骑两用儿童三轮车（以下简称“儿童三轮车”）的术语和定义、基本要求、技术要求、试验方法、检验规则、标志、包装、运输和贮存、质量承诺。 本标准适用于1周岁以上5周岁以下供家庭使用的推骑两用儿童三轮车。 本标准不适用于可折叠儿童三轮车及用于其它特殊目的（如：游乐用）设计的推骑两用儿童三轮车。

Pushing & riding child tricycle

ASTM F1967-18 婴儿浴室座椅的消费者安全标准规范

Standard Consumer Safety Specification for Infant Bath Seats