A41 数学 标准查询与下载

ISO 28597:2017 按属性验收取样规程.每百万不合格产品中规定的质量等级

This International Standard specifies, for quality levels expressed as nonconforming items per million items, procedures for estimating the quality level of a single entity (e.g. a lot) and, when the production process is in statistical control, for estimating the process quality level based on evidence from several samples. Procedures are also specified for using this information when selecting a suitable sampling plan so as to verify that the quality level of a given lot does not exceed a stated limiting quality level (LQL). For the case where no prior sample data is available, guidance is given for presuming a process quality level in selecting a plan.

Acceptance sampling procedures by attributes - Specified quality levels in nonconforming items per million

ISO 28594:2017 产品验收的组合接受零点抽样系统和过程控制规程

This International Standard provides a set of accept-zero sampling systems and procedures for planning and conducting inspections to assess quality and conformance to specified requirements. In addition, this International Standard provides requirements for alternative acceptance methods proposed by the supplier. Such alternative methods would be based upon establishing and implementing an internal prevention-based quality management system as a means of ensuring that all products conform to requirements specified by the contract and associated specifications and standards. This International Standard, when cited in contract, is applicable to the supplier and extends to subcontractors or vendors. The quality plans are to be applied as specified in the contract documents, and deliverables may be submitted for acceptance if the requirements of this International Standard have been met. Sampling systems and procedures in this International Standard are applicable, when appropriate, to assess conformance to requirements of the following: a) end items; c) operations or services; e) supplies in storage; b) components or basic materials; d) materials in process; f) maintenance operations; g) data or records; h) administrative procedures. NOTE Use of the word “product” throughout this International Standard also refers to services and other deliverables. The sampling systems and procedures of this International Standard are not intended for use with destructive tests or where product screening is not feasible or desirable. In such cases, the sampling systems to be used will be specified in the contract or product specifications.

Combined accept-zero sampling systems and process control procedures for product acceptance

DIN EN ISO 14405-1:2017 几何产品规范(GPS).尺寸规格公差.第1部分:线性尺寸(ISO 14405-1-2016).德文版本EN ISO 14405-1-2016

Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1: Linear sizes (ISO 14405-1:2016); German version EN ISO 14405-1:2016

DIN EN ISO 14405-3:2017 产品几何技术规范(GPS).尺寸公差.第3部分:角度尺寸(ISO 14405-3-2016);德文版本EN ISO 14405-3-2017

Geometrical product specifications (GPS) - Dimensional tolerancing - Part 3: Angular sizes (ISO 14405-3:2016); German version EN ISO 14405-3:2017

BS ISO 7870-8:2017 控制图. 小批量生产和少量混合批次的制图技术

Control charts. Charting techniques for short runs and small mixed batches

ISO 7870-8:2017 控制图. 第8部分: 小批量生产和少量混合批次的制图技术

This document describes ways of applying regular variables control charts to short runs and small mixed batches where the sample size for monitoring is restricted to one. It provides a set of tools to facilitate the understanding of sources of variation in such processes so that the processes can be better managed. The charts described are process-focused rather than product-focused. The user can plot, monitor and control similar characteristics on different items, or different characteristics on an item, on a single control chart. NOTE 1 The terms short run and small batch size are not well defined. Here, short run and small batch size are taken to mean only a few items are manufactured before a different item is then produced. NOTE 2 For situations where the subgroup size is larger than one, other standards apply.

Control charts - Part 8: Charting techniques for short runs and small mixed batches

BS ISO 16355-2:2017 新技术和产品开发流程统计和相关方法的应用. 利用非量化方法获取客户和利益相关者需求

Applications of statistical and related methods to new technology and product development process. Non-quantitative approaches for the acquisition of voice of customer and voice of stakeholder

BS ISO 22514-2:2017 过程管理的统计方法.能力和性能.与时间有关的过程模型的过程能力和性能

Statistical methods in process management. Capability and performance. Process capability and performance of time-dependent process models

BS ISO 16355-5:2017 统计和相关方法在新技术和产品开发过程中的应用 解决方案策略

Applications of statistical and related methods to new technology and product development process. Solution strategy

BS ISO 16355-4:2017 新技术和产品开发流程统计和相关方法的应用. 分析客户和利益相关者的非量化和量化需求

Applications of statistical and related methods to new technology and product development process. Analysis of non-quantitative and quantitative Voice of Customer and Voice of Stakeholder

ISO 22514-2:2017 过程管理的统计方法. 能力和性能. 第2部分: 时间依赖性进程模型的处理能力和性能

Statistical methods in process management - Capability and performance - Part 2: Process capability and performance of time-dependent process models

ISO 16355-2:2017 新技术和产品开发流程统计和相关方法的应用. 第2部分: 利用非量化方法获取客户和利益相关者需求

This document describes the non-quantitative approaches in the acquisition of voice of customer (VOC) and voice of stakeholder (VOS) and its purpose, and provides recommendations on the use of the applicable tools and methods. It is not a management system standard. NOTE It does not provide requirements or guidelines for organizations to develop and systematically manage their policies, processes, and procedures in order to achieve specific objectives. Users of this document include all organization functions necessary to assure customer satisfaction, including business planning, marketing, sales, research and development (R&D), engineering, information technology (IT), manufacturing, procurement, quality, production, service, packaging and logistics, support, testing, regulatory, and other phases in hardware, software, service, and system organizations.

Applications of statistical and related methods to new technology and product development process - Part 2: Non-quantitative approaches for the acquisition of voice of customer and voice of stakeholder

ISO 16355-5:2017 新技术和产品开发流程统计和相关方法的应用. 第5部分: 解决策略

Applications of statistical and related methods to new technology and product development process - Part 5: Solution strategy

ISO/TR 16355-8:2017 新技术和产品开发流程统计和相关方法的应用. 第8部分: 商业化和生命周期指南

Applications of statistical and related methods to new technology and product development process - Part 8: Guidelines for commercialization and life cycle

ISO 16355-4:2017 新技术和产品开发流程统计和相关方法的应用. 第4部分: 分析客户和利益相关者的非量化和量化需求

This document describes the analysis of the voice of the customer (VOC) and the voice of the stakeholder (VOS). These include translation of VOC and VOS into true customer needs, prioritization of these needs, and competitive benchmarking of alternatives from the customer’s perspective. This document also provides recommendations on the use of the applicable tools and methods. Users of this document include all organization functions necessary to ensure customer satisfaction, including business planning, marketing, sales, research and development (R and D), engineering, information technology (IT), manufacturing, procurement, quality, production, service, packaging and logistics, support, testing, regulatory, and other phases in hardware, software, service, and system organizations.

Applications of statistical and related methods to new technology and product development process - Part 4: Analysis of non-quantitative and quantitative Voice of Customer and Voice of Stakeholder

BS ISO 22514-4:2016 过程管理中的统计方法 能力和表现 过程能力估计和绩效衡量

Statistical methods in process management. Capability and performance. Process capability estimates and performance measures

ISO/TR 16705:2016 实施六西格玛的统计方法. 列联表分析选图

Statistical methods for implementation of Six Sigma - Selected illustrations of contingency table analysis

ISO 22514-4:2016 过程管理中的统计方法.能力和性能.第4部分:加工能力评估和性能测量

Statistical methods in process management - Capability and performance - Part 4: Process capability estimates and performance measures

ISO 14405-1:2016 几何产品规范(GPS).尺寸公差.第1部分:线性尺寸

Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1: Linear sizes

DIN ISO 3951-1:2016 变量检验用取样程序.第1部分:按接收质量限(AQL)检索的单一质量特性和单一AQL的逐批检验一次抽样计划的规范(ISO 3951-1-2013).德文和英文文本

Sampling procedures for inspection by variables - Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL (ISO 3951-1:2013); Text in German an