A85 集装箱、托盘、货架 标准查询与下载

BS ISO 8611-2:2011 货物搬运用托盘.平托盘.性能要求和试验的选择

Pallets for materials handling. Flat pallets. Performance requirements and selection of tests

BS EN ISO 8611-2:2012 物料运输用托盘.平托盘.性能要求与试验选择

Pallets for materials handling. Flat pallets. Performance requirements and selection of tests

SN/T 2882-2011 进出口液体产品集装箱袋检验规程

本标准规定了进出口液体产品一次性使用集装箱袋（以下简称集装袋）的术语、技术要求、抽样、检验、结果判定及不合格处置。 本标准适用于用标准集装箱承载的、盛装液体产品（危险性液体产品除外）集装袋的检验。

Rules of inspection for bulk flexitank of import and export liquid products

ISO 8611-3:2011 货物运输用托盘.平托盘.第3部分:最大工作负荷

This part of ISO 8611 specifies the determination of maximum working load for new flat pallets with known payloads in different handling environments. It is not intended to apply to pallets with a fixed superstructure or a rigid, self-supporting container that can be mechanically attached to the pallet and which contributes to the strength of the pallet.

Pallets for materials handling - Flat pallets - Part 3: Maximum working loads

ISO 8611-2:2011 货物运输用托盘.平托盘.第2部分:性能要求与试验选择

This part of ISO 8611 specifies the performance requirements to establish nominal loads for new flat pallets. It also specifies the tests required for new flat pallets in various handling environments and the performance requirements for tests with payloads. It is not intended to apply to pallets with a fixed superstructure or a rigid, self-supporting container that can be mechanically attached to the pallet and which contributes to the strength of the pallet.

Pallets for materials handling - Flat pallets - Part 2: Performance requirements and selection of tests

ISO 8611-1:2011 货物运输用托盘.平托盘.第1部分:试验方法

This part of ISO 8611 specifies the test methods available for evaluating new flat pallets for materials handling. The test methods are split into groups for: ⎯ nominal load testing; ⎯ maximum working load testing; ⎯ durability comparison testing. It is not intended to apply to pallets with a fixed superstructure or a rigid, self-supporting container that can be mechanically attached to the pallet and which contributes to the strength of the pallet. NOTE Specific tests for determining load capacity do not replace the value of conducting field tests on specific pallet designs.

Pallets for materials handling - Flat pallets - Part 1: Test methods

DIN EN 15878:2011 钢材静态存储系统.术语和定义;德文版本EN 15878-2010

This European Standard specifies terms and definitions for steel storage systems, as listed in Table 1, and their basic components and accessories.

Steel static storage systems - Terms and definitions; German version EN 15878:2010

DIN EN 14482:2011 邮政服务.国际信件邮寄用托盘.试验方法和性能要求;德文版本EN 14482-2010

Postal services - Trays for international letter mail - Test methods and performance requirements; German version EN 14482:2010

ASTM D6039/D6039M-11 敞口和有盖的木板箱的标准规格

1.1 This specification covers five types and two styles of open and one type, and one style of covered wood crates designed for net loads not exceeding 4000 lb [1814 kg]. Open crates are suitable for shipment of items, which are not readily susceptible to damage from outside forces, and which require only limited protection against the elements. 1.2 If environmental protection is necessary, use of a shroud or a covered crate should be considered. With the exception of Type III, Style B crates, the crates included in this specification are for use in domestic and overseas shipment of net loads not over 4000 lb [1814 kg]. Use shall be confined to items falling within the dimensions and weight limitations of the types and grades specified in Table 1. 1.3 In general, Style A crates have heavier components and are to withstand rather severe handling and multiple shipments (heavy-duty), while Style B crates should be confined to handling and shipping that impose only light to moderate hazards on the container (light-duty). Types I, IV, and V crates are general purpose types; Type II crates are designed for items such as ladders, tubing, extrusions, or wallboard which do not require blocking, bracing, or cushioning; and Type III, Style B crates are designed for such self-supporting material as channels, angles, or other structural members where the container serves only as a means for more convenient stacking and handling. 1.4 If the use of other construction methods or techniques is acceptable and permitted (see 5.1.13), the resulting packaging systems shall be of equal or better performance than would result from the use of these specified materials and procedures. The appropriate distribution cycle specified in Practice D 4169 can be used to develop comparative procedures and criteria. 1.5 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. TABLE 1 Crate Classification TypeStyle A, Heavy DutyStyle B, Light Duty Maximum Net Load (lb/kg)Inside Dimensions, maxMaximum Net Load (lb/kg)Inside Dimensions, max Length (ft/mm)Width (ft/mm)Height (ft/mm)Length (ft/mm)Width (ft/mm)Height (ft/mm) I 250 [113] 4 [1200]3 [900]3 [900]

Standard Specification for Open and Covered Wood Crates

ASTM D7478/D7478M-11 重载封装木箱的标准规格

1.1 This specification covers requirements for two types and two classes of sheathed crates each of which may have two base styles. The crates are designed for net loads not exceeding 30 000 pounds lb [13 607 kg] and to withstand the most severe overseas shipping and storage conditions. 1.2 The crates described by this specification are intended to protect items from atmospheric elements during shipment and storage. They are designed to withstand the rough handling of logistic operations including stacking and outside storage for a prolonged period. 1.3 Class 1 and 2 crates may be used interchangeably as desired. However, the Class 2 crate should be used when weight is a prime consideration, as the lack of diagonals and thinner plywood sheathing results in a lighter crate. 1.4 Demountable crates, Type II, should be used whenever it is expected that the contained item will require reshipping to another destination. 1.5 Sill bases, Style B, are intended for items that project below their mounting points, such as disassembled vehicles. 1.6 If the use of other construction method or techniques is acceptable and permitted (see 5.10), the resulting packaging systems shall be of equal or better performance than would result from the use of these specified materials and procedures. The appropriate distribution cycle, specified in Practice D 4169 can be used to develop comparative procedures and criteria. 1.7 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. See IEEE/ASTM SI 10 for conversion of units. 1.8 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Heavy Duty Sheathed Wood Crates

ASTM D6251/D6251M-11 木加固木板船运箱的标准规范

1.1 This specification covers the fabrication and closure of empty and full wood-cleated, hereafter referred to as wood-cleated, panelboard boxes. These boxes are intended for use as containers for domestic and overseas shipment of general materials and supplies, not exceeding 1000 lb [454 kg] depending on box type (see 10.1). 1.2 Wood-cleated panelboard shipping box performance is dependent on its fabricated components and subsequent assembly; therefore, a variety of types, classes, styles, and treatments reflecting varied performance are specified. This specification, however, does not cover wood-cleated panelboard box performance under all atmospheric, handling, shipping, and storage conditions. 1.3 If the use of other construction methods or techniques is acceptable and permitted (see 5.1.17), the resulting packaging systems shall be of equal or better performance than would result from the use of these specified materials and procedures. The appropriate distribution cycle, specified in Practice D4169, can be used to develop comparative procedures and criteria. 1.4 The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the standard. See for conversion of units. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of the standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Wood-Cleated Panelboard Shipping Boxes

KS T ISO 830:2010 集装箱.词汇

이 표준은 복합 일관 운송에 사용되는 화물 컨테이너에 관한 용어(이하 용어라고 한다.)의

Freight containers-Vocabulary

KS T ISO 668:2010 系列1集装箱.分类、尺寸和额定值

이 표준은 바깥 치수를 기준으로 국제 운송용 화물 컨테이너를 분류하고, 또한 그 분류에 따

Series 1 freight containers－Classification, dimensions and ratings

KS T ISO 6780:2010 洲际物料输送用平托盘.主要尺寸和公差

이 표준은 파렛트 트럭, 지게차 그리고 다른 적절한 취급 장비에 의한 수송 및 취급과 관련

Flat pallets for intercontinental materials handling－Principal dimensions and tolerances

NF H90-023:2010 货运集装箱.机械密封件.

Freight containers - Mechanical seals.

JJG(铁道) 203-2010 罐式集装箱容积检定规程

本规程适用于装运液体产品、经铁路运输的罐式集装箱容积的首次检定和后续检定，其他罐式集装箱可参照执行。

Verification Regulation of Tanker Containers Volume

JJG 203-2010 罐式集装箱容积检定规程

Regulations for volumetric verification of tank containers

DIN EN 15512:2010 钢制固定储藏设备.可调节托盘货架系统.结构设计原则.德文版本EN 15512-2009

This Euiopean Standard specifies the structural design requirements applicable to all types of adjustable beam pallet rack systems fabricated from steel members intended for the storage of unit loads and subject to predominantly static loads.

Steel static storage systems - Adjustable pallet racking systems - Principles for structural design; German version EN 15512:2009

BS EN 15878:2010 钢材静态存储系统.术语和定义

This European Standard specifies terms and definitions for steel storage systems, as listed in Table 1, and their basic components and accessories. NOTE Terms and definitions for mechanical handling equipment and load make-up accessories are included in informative annexes.

Steel static storage systems. Terms and definitions

BS ISO 18334:2010 物料运输用托盘.新木制托盘的组装质量

Pallets for materials handling - Quality of assembly of new wooden pallets