共找到 27 条与 相关的标准,共 2 页
本文件规定了液化气储运用高强度聚氨酯泡沫塑料的术语和定义、产品类别和标记、要求、试验方法、检验规则、标志、包装、运输和贮存。 本文件适用于液化气陆基储罐和管道,液化气运输船货舱、储罐和管道,船用液化气储罐、管道和燃料舱等领域应用的聚氨酯泡沫塑料。
High strength polyurethane foam for storage and transport of liquefied gas
本文件规定了聚氨酯泡沫中磷酸三乙酯(TEP)、磷酸三丙酯(TPP)、磷酸三异丁酯(TiBP)、磷酸三丁酯(TBP)、磷酸三(2-氯乙基) 酯(TCEP)、磷酸三(2-氯丙基) 酯(TCPP)、磷酸二丁苯酯 (DBPP)、磷酸三(1,3-二氯异丙基) 酯(TDCPP)、磷酸三苯酯(TPhP)、磷酸三(丁氧基乙基) 酯(TBEP)、磷酸二苯异辛酯(DPOP)、磷酸三(2-乙基己基) 酯(TEHP)、磷酸三邻甲苯酯(TOCP)、磷酸三间甲苯酯(TMCP) 14种有机磷酸酯类阻燃剂的气相色谱-串联质谱鉴定方法。 本文件适用于聚氨酯泡沫中上述14种有机磷酸酯类阻燃剂的鉴定。
Technical specification for identification of 14 kinds of organophosphate flame retardants in polyurethane foam
Technical specifications for epoxy resin grouting materials for hydraulic buildings
本文件描述了多层纤维布/聚氯乙烯中空复合材料(以下简称“中空复合材料”)的气密性试验方法,包括试验设备及其精度、试验原理、试验方法、试验结果计算以及试验报告等。 本文件适用于以多层纤维布为增强基材,两面覆以高强聚氯乙烯复合材料,经压贴工艺生产出来的中空复合材料的气密性试验。
Test method for air tightness of multi-layer fiber cloth/polyvinyl chloride hollow composite materials
General technical specification for graphene modified conductive polystyrene materials
Determination of alkanes and aldehydes and ketones produced by hot melting of plastic wires for additive manufacturing
本标准规定了热塑性聚酰亚胺树脂的型号、技术要求、试验方法、检验规则以及标志、包装、贮存和运输。 本标准适用于以二胺和二酐为主要原料制备的热塑性聚酰亚胺树脂。其中PI-I型属于醚酐型,PI-II型属于联苯酐型。
Specifications for thermoplastic polyimide resins
本标准规定了聚酰亚胺泡沫的要求、试验方法、检验规则及标志、包装、贮存和运输。 本标准适用于以主链含有酰亚胺环结构的聚酰亚胺树脂为主要成分,通过发泡工艺制备的一类含有不同尺度孔结构的多孔的聚酰亚胺泡沫产品。
Polyimide foam technical specification
General technical requirements for long glass fiber reinforced polypropylene composites resistant to extreme ambient temperature
Technical specification for suspended assembled sports floor
Polyethylene blown agricultural ground cover film
General technical requirements for thermoplastic polyurethane elastomer toughened polyoxymethylene copolymer engineering plastics
General technical requirements for retort-resistant composite films and bags
General technical requirements for carbon dioxide extruded polystyrene foam board
DB34/T 2986 的本部分规定了丙烯腈-丁二烯-苯乙烯(ABS)再生改性料的术语和定义、分类与命名、 材料和有害物质限量要求。 本部分适用于丙烯腈-丁二烯-苯乙烯(ABS)再生改性专用料。 本部分与 DB34/T 2986.2 和 DB34/T 2986.3 结合使用。
Acrylonitrile-butadiene-styrene (ABS) general technical conditions for recycled modified materials Part 1: General
本标准规定了聚苯乙烯再生料的术语和定义、分类与命名、要求、试验方法、检验规则、标志、包 装、运输及贮存。 本标准适用于聚苯乙烯再生料。
General Technical Conditions for Polystyrene Recycled Material (PS-RC)
本标准规定了聚乙烯再生料的术语和定义、分类与命名、要求、试验方法、检验规则、标志、包装、 运输及贮存。 本标准适用于聚乙烯再生料。
General Technical Specifications for Polyethylene Recycled Material (PE-RC)
本标准规定了聚丙烯再生料的术语和定义、分类与命名、要求、试验方法、检验规则、标志、包装、 运输及贮存。 本标准适用于聚丙烯再生料。
General Technical Conditions for Polypropylene Recycled Material (PP-RC)
DB34/T 2986 的本部分规定了阻燃丙烯腈-丁二烯-苯乙烯(ABS)再生改性专用料的术语和定义、分 类与命名、要求、试验方法、检验规则、标志、包装、运输及贮存。 本部分适用于阻燃丙烯腈-丁二烯-苯乙烯(ABS)再生改性专用料。
Acrylonitrile-Butadiene-Styrene (ABS) General Specifications for Recycled Modified Materials Part 2: Flame Retardant Type
DB34/T 2986 的本部分规定了增强丙烯腈-丁二烯-苯乙烯(ABS)再生改性专用料的术语和定义、分 类与命名、要求、试验方法、检验规则、标志、包装、运输及贮存。 本部分适用于增强丙烯腈-丁二烯-苯乙烯(ABS)再生改性专用料。
Acrylonitrile-butadiene-styrene (ABS) general technical conditions for recycled modified materials Part 3: Enhanced
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号