G54 颜料 标准查询与下载

STAS 1846-1990 外部下水道．测定污水排放．设计说明

Prezentul standard se refer? la metoda de determinare a debitelor de ap? de canalizare, care s?nt colectate ?i transportate prin re?elele de canalizare exterioai e cl?dirilor ?i evacuate ?n emisari, direct sau prin intermediul sta?iilor de epurare a acest

Outer sewage. Determination of sewage water discharges. Design specifications

STAS 11565-1990 污物处理．城市处理站菌致分解污泥干燥平台．设计规范

Prezentul standard stabile?te prescrip?iile de pioieclaie^a platformelor pentru uscarea n?molului fermentat anaerob sau stabilizat aerob, rezultat ?n sta?iile de epurare a apelor uzate or??ene?ti, sau a apelor uzate industriale, ?n cazul ?n care acestea a

Sewerages. Platforms for digested sludge drying of urban treatment stations. Design specifications

NF T31-208:1989 颜料和填料.二氧化钛.用原子吸收光谱法对添加剂成分的测定

Pigments and extenders. Titanium dioxide. Determination of additive elements by atomic absorption spectrometry.

BS 4313:1988 油漆用铬酸锶颜料规范

Requirements and methods for the determination of strontium, water-soluble chloride, nitrate and chromate contents.

Specification for strontium chromate pigments for paints

JIS K 5120:1988 磷光颜料

Phosphorescent pigments

BS EN ISO 787-15:1988 颜料和填充剂的一般试验方法.同类着色颜料耐光性的比较

Describes two methods of exposure. In method A, the material is exposed under glass to natural light. In method B, the material is exposed to direct artificial light. The test sample and the agreed reference pigment are each dispersed in the same agreed binder. The dispersions are applied to a substrate and dried; they are then exposed to natural daylight with protection from rain (method A) or to artificial light (method B) under specified conditions. The resistance to light is assessed by comparing the change in colour of the test sample to that of the agreed reference pigment. Cancels and replaces the first edition ISO 787/15-1973.

General methods of test for pigments and extenders - Comparison of resistance to light of coloured pigments of similar types

BS EN ISO 787-16:1988 颜料和填充剂的一般试验方法.相对着色力(或等效着色值)和着色颜料还原后的颜色的测定.视觉比较法

he complete procedure consists of four parts: determination of the conditions for the preparation of the dispersion of the coloured pigment, and determination of the ratio of the coloured pigment to white pigment; preparation of the dispersion of the coloured pigment under defined conditions on an automatic muller; mixing the dispersions of coloured pigment and white pigment in a known ratio with a white pigment paste; the strength and undertone of the resulting reduction paste are compared with those of a similar paste made under the same conditions from the agreed reference pigment and the same white pigment paste. - This second edition cancels and replaces the first edition ISO 787/16-1973.

General methods of test for pigments and extenders - Determination of relative tinting strength (or equivalent colouring value) and colour on reduction of coloured pigments - Visual comparison method

BS EN ISO 787-24:1988 颜料和填充剂的一般试验方法.第24部分:着色颜料的相对着色力和白色颜料的相对散射力的测定.光度法

The method specified provide an instrumental alternative to those described in ISO 787/16 and ISO 787/17. Equal masses of a coloured material are separately dispersed in the same mass of the same white pigment paste. The reflectivity of each dispersion is measured photometrically. From the corresponding values of K/S the relative tinting strength is given. For measurement of the relative scattering power equal masses of a white test material and an agreed reference pigment are separately dispersed in the same mass of the same black pigment paste. The reflectivity of each dispersion is measured photometrically at 550 nm. From the corresponding values of K/S the relative scattering power is given.

General methods of test for pigments and extenders - Determination of relative tinting strength of coloured pigments and relative scattering power of white pigments - Photometric methods

BS 318:1988 油漆用氧化铬绿颜料规范

Requirements and methods of test.

Specification for chrome oxide green pigments for paints

BS 6857:1987 油漆用镉颜料规范

Essential and conditional requirements. The latter related to agreed samples of reference pigments. Methods for determination of cadmium, zinc, selenium and sulphur contents included. Limits for 'soluble' heavy metal specified by reference to published methods with methods included for 'soluble' cadmium and zinc.

Specification for cadmium pigments for paints

NF T31-015:1987 颜料.铬酸铅绿颜料.规范

Pigments. Lead chrome green pigments. Specifications.

NF T31-016:1987 颜料.铬酸铅颜料和铬钼酸铅颜料.规范

Pigments. Lead chromate pigments and lead chromate-molybdate pigments. Specifications.

ASTM D81-87(2003) 碱性碳酸盐铅白颜料

1.1 This specification covers the material commercially known as basic carbonate white lead, used as a pigment and in putty. The pigment may be purchased in the dry form or as a paste in oil.

Standard Specification for Basic Carbonate White Lead Pigment

ASTM D81-87(2008)e1 碱性碳酸盐铅白颜料的标准规范

1.1 This specification covers the material commercially known as basic carbonate white lead, used as a pigment and in putty. The pigment may be purchased in the dry form or as a paste in oil. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

Standard Specification for Basic Carbonate White Lead Pigment

ASTM D765-87(2003) 未加工黄土和焙烧黄土颜料的标准规范

1.1 This specification covers the pigments commercially known as raw sienna and burnt sienna.

Standard Specification for Raw and Burnt Sienna Pigments

HG/T 3005-1986 联苯胺黄G

Benzidine yellow G

HG/T 3006-1986 云母氧化铁

Micaceous iron oxide

NF T31-002:1986 颜料.氧化铁颜料.规范

Pigments. Iron oxide pigments. Specifications.

ASTM D79-86(2004) 氧化锌颜料

1.1 This specification covers the pigments commercially known as "zinc white" or zinc oxide. The pigments may be purchased in the dry form or as a paste in oil. Note 1Zinc oxides are used in many industries. For additional information, see Classification D 4295 and Test Methods D 4315 for descriptions of zinc oxide use in rubber compounding.1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.

Standard Specification for Zinc Oxide Pigments

ASTM D1199-86(2003) 碳酸钙颜料的标准规范

1.1 This specification covers two types of high-content calcium carbonate pigments, as follows:1.1.1 Type PC8212;Calcium carbonate precipitate, prepared either by complete solution or by carbonation of lime.1.1.2 Type GC8212;Ground mineral product.1.2 Six grades of pigments, based on particle size (see ) are covered.1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.

Standard Specification for Calcium Carbonate Pigments