共找到 1639 条与 钢铁与铁合金分析方法 相关的标准,共 110 页
本标准规定了用电位滴定法测定钴量。本标准适用于合金钢、高温合金和精密合金中钻量的测定。测定范围:3.00%以上。
Methods for chemical analysis of iron steel and alloy.The Potentiometric titration method for the determination of cobalt content
本标准规定了用丁二酮肟重量法测定镍量。本标准适用于碳钢、合金钢、精密合金、高温合金中镍的测定。测定范围:2%以上。
Methods for chemical analysis of iron, steel and alloy.The dimethylglyoxime gravimetric method for the determination of nickel content
本标准规定了用火焰原子吸收光谱法测定钙量。 本标准适用于铸铁、碳钢、合金钢及高温合金中钙量的测定。测定范围:0.0005%~0.010%。
Methods for chemical analysis iron,steel and alloy.The flame atomic absorption spertrometric method for the determination of calcium content
本标准规定了用火焰原子吸收光谱法测定钒量。 本标准适用于钢铁及合金中钒量的测定。测定范围:0.005%~1.0%。
Methods for chemical analysis iron,steel and alloy.The flame atomic absorption spertrometric method for the determination of vanadium content
本标准规定了蒸馏分离-钼蓝分光光度法测定砷量。本标准适用于纯铁、碳钢、合金钢、精密合金及高温合金中砷量的测定。测定范围:0.0005%~0.10%。
Methods for chemical analysis of iron, steel and alloy.The distillation-molybdenum blue spectrophotometric method for the determination of arsenic content
本标准规定了用丁二酮肟分光光度法测定镍量。本标准适用于生铁、铁粉、碳素钢、合金钢中镍量的测定。测定范围0.030%~2.00%。
Methods for chemical analysis of iron, steel and alloy.The dimethylglyoxime spectrophotometric method for the determination of nickel content
本标准规定了用亚硝基R盐分光光度法测定钴量。本标准适用于生铁、碳钢、合金钢和精密合金中钴量的测定。测定范围:0.10%~3.00%。
Methods for chemical analysis of iron ,steel and alloy.The nitroso-R-salt spectrophotometric method for the determination of cobalt content
本标准通则规定了光电发射光谱分析法共同的一般事项。 本标准通则适用于钢铁及合金光电发射光谱分析。以金属固体试样直接作电极,利用符合分析要求的激发条件使之放电发光、分光计分光,用光电法测量分析线与内标线的强度比,利用预先用标准试样绘制的工作曲线求出分析试样中分析元素百分含量。在制(修)订钢铁及合金光电发射光谱分析国家标准时,应遵守本通则。
General rule for photoelectric emission spectroscopic analysis of iron, steel and alloy
本标准规定了用过硫酸铵氧化容量法测定铬量。本标准适用于生铁、碳素钢、合金钢、高温合金和精密合金中铬量的测定。测定范围:0.100%~30.00%。
Methods for chemical analysis of iron,steel and alloy--The ammonium persulfate oxidation volumetric method for the determination of chromium content
本标准规定了用燃烧重量法或燃烧气体容量法测定非化合碳量。本标准适用于铁和碳钢中非化合碳量的测定。测定范围:0.030%~5.00%。
Methods for chemical analysis of iron,steel and alloy--The combustion gravimetric/gasometric method for the determination of non-combined carbon content
本标准规定了用三氯化钛-重铬酸钾容量法测定铁量。 本标准适用于高温合金和精密合金中铁量的测定。测定范围:0.50%~8.00%。
Methods for chemical analysis of iron,steel and alloy--The titanium trichloride-potassium dichromate volumetric method for the determination of iron content
本标准规定了用氧化铝色层分离-硫酸钡重量法测定硫量。 本标准适用于生铁、铁粉、碳钢、合金钢、高温合金和精密合金中硫量的测定,测定范围:0.0030%~0.20%。
Methods for chemical analysis of iron,steel and alloy--The alumina chromatographic separation-barium sulfate gravimetric method for the deteremination of sulphur content
本标准规定了用燃烧重量法测定碳量。本标准适用于生铁、铁粉、碳钢、合金钢、高温合金、精密合金中碳量的测定。测定范围: 0.1O%~5.00%。
Methods for chemical analysis of iron,steel and alloy--The combustion gravimetric method for the determination of carbon content
本标准规定了用变色酸光度法测定钛量。本标准适用于生铁、碳钢及铁基钢种中钦量的测定。测定范围:0.010%~2.50%。
Methods for chemical analysis of iron,steel and alloy--The chromotropic acid photometric method for the determination of titanium content
本标准规定了用甲醇蒸馏-姜黄素光度法测定硼量。 本标准适用于碳钢、合金钢、高温合金和精密合金中硼量的测定。测定范围:0.0005%~0.20%。
Methods for chemical analysis of iron,steel and alloy--The methanol distillation-curcumin photometric method for the determination of boron content
本标准规定了用碳酸钠分离-二苯碳酰二肼光度法测定铬量。本标准适用于碳钢、低合金钢和精密合金中铬量的测定。测定范围:0.005%~0.500%。
Methods for chemical analysis of iron,steel and alloy--The sodium carbonate separation-diphenyl carbazide photometric method for the determination of chromium content
本标准规定了红外线吸收法测定碳量。 本标准适用于硅铁中碳量的测定。测定范围:0.025%~0.250%。
Methods for chemical analysis of ferrosilicon--The infrared absorption method for the determination of carbon content
Methods for chemical analysis of iron,steel and alloy The indophenol blue photometric methods for the determination of nitrogen content after distillation seperation
本标准规定了硫氰酸盐-盐酸氯丙嗪-三氯甲烷萃取光度法测定钨量。 本标准适用于碳钢、中、低合金钢中钨量的测定。测定范围0.0020%~0.100%。
Methods for chemical analysis of iron,steel and alloy--The thiocyanate-chlorpromazine hydrochloride-chloroform extraction photometric method for the determination of tungsten content
本标准规定了用邻菲中啰啉分光光度法测定铁量。 本标准适用于高温合金和精密合金中铁量的测定。测定范围:0.10%~1.00%。
Methods for chemical analysis of iron,steel and alloy--The o-phenanthroline spectrophotometric method for the determination of iron content
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号