H63 稀有高熔点金属及其合金 标准查询与下载

ASTM B349/B349M-09 用于核应用的海绵锆和原生金属的其他形式用标准规范

1.1 This specification covers one grade of virgin zirconium metal commonly designated as sponge because of its porous, sponge-like texture, but it may also take other forms such as chunklets, suitable for use in nuclear applications. 1.2 Unless a single unit is used, for example corrosion mass gain in mg/dm2, the values stated in either inch-pound or SI units are to be regarded separately as standard. The values stated in each system are not exact equivalents; therefore each system must be used independently of the other. SI values cannot be mixed with inch-pound values. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Zirconium Sponge and Other Forms of Virgin Metal for Nuclear Application

ASTM B394-09e1 铌和铌合金无缝及焊接管标准规范

For the purposes of determining compliance with the specified limits for requirements of the properties listed in this specification, an observed value or a calculated value shall be rounded as indicated in accordance with the rounding method of Practice E29.1.1 This specification covers wrought niobium and niobium alloy seamless and welded tubes as follows: 1.1.1 R04200-Type 18212;Reactor grade unalloyed niobium, 1.1.2 R04210-Type 28212;Commercial grade unalloyed niobium, 1.1.3 R04251-Type 38212;Reactor grade niobium alloy containing 1 % zirconium, and 1.1.4 R04261-Type 48212;Commercial grade niobium alloy containing 1 % zirconium. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 The following precautionary caveat pertains only to the test methods portion of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Niobium and Niobium Alloy Seamless and Welded Tubes

ASTM B393-09e1 铌和铌合金带材,薄板和中厚板标准规范

For the purposes of determining compliance with the specified limits for requirements of the properties listed in this specification, an observed value or a calculated value shall be rounded as indicated in accordance with the rounding method of Practice E29.1.1 This specification covers five grades of wrought niobium and niobium alloy strip, sheet, and plate as follows: 1.1.1 R04200-Type 18212;Reactor grade unalloyed niobium, 1.1.2 R04210-Type 28212;Commercial grade unalloyed niobium, 1.1.3 R04251-Type 38212;Reactor grade niobium alloy containing 1 % zirconium, and 1.1.4 R04261-Type 48212;Commercial grade niobium alloy containing 1 % zirconium. 1.1.5 R04220-Type 58212;RRR grade pure niobium. Note 18212;This grade of niobium is used in superconducting applications that require the ultra high purity. Because of the high purity the product is conducive to very large grains that can adversely affect formability. It is not recommended for other applications. 1.2 Except for dimensional tolerances in Table 1, the values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 The following precautionary caveat pertains only to the test methods portion of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Niobium and Niobium Alloy Strip, Sheet, and Plate

ASTM B392-09e1 铌和铌合金棒材、杆材及线材标准规范

For the purposes of determining compliance with the specified limits for requirements of the properties listed in this specification, an observed value or a calculated value shall be rounded as indicated in accordance with the rounding method of Practice E29. 1.1 This specification covers four grades of wrought niobium and niobium alloy bar, rod, and wire as follows: 1.1.1 R04200-Type 18212;Reactor grade unalloyed niobium, 1.1.2 R04210-Type 28212;Commercial grade unalloyed niobium, 1.1.3 R04251-Type 38212;Reactor grade niobium alloy containing 1 % zirconium, and 1.1.4 R04261-Type 48212;Commercial grade niobium alloy containing 1 % zirconium. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 The following precautionary caveat pertains only to the test methods portion of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Niobium and Niobium Alloy Bar, Rod, and Wire

ASTM B391-09e1 铌和铌合金铸锭的标准规范

For the purpose of determining compliance with the specified limits for requirements of the properties listed in the following tables, an observed value or a calculated value shall be rounded as indicated in accordance with the rounding method of Practice E29. 1.1 This specification covers unalloyed and alloyed niobium ingots prepared by vacuum- or plasma-arc melting or electron-beam melting to produce consolidated metal for processing to various mill shapes. 1.2 The materials covered by this specification are: 1.2.1 R04200-Type 18212;Reactor grade unalloyed niobium, 1.2.2 R04210-Type 28212;Commercial grade unalloyed niobium, 1.2.3 R04251-Type 38212;Reactor grade niobium alloy containing 1 % zirconium, and 1.2.4 R04261-Type 48212;Commercial grade niobium alloy containing 1 % zirconium. 1.3 Unless a single unit is used, the values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 The following precautionary caveat pertains only to the test method portions of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Niobium and Niobium Alloy Ingots

KS D 2568-2008 钽的原子吸收光谱分析法

이 규격은 탄탈럼 중의 크로뮴, 구리, 철, 망가니즈 및 니켈을 원자흡수분광법으로 분석하는

Tantalum－Method for atomic absorption spectrometric analysis

GJB 765A-2008 陀螺转子用钨基高密度合金环坯规范

本规范规定了陀螺转子用钨基高密度合金环坯的要求、质量保证规定和交货准备等。 本规范适用于航空、航天、舰船等陀螺转子用钨基高密度合金环坯。

Specification for ring blanks of high-density tungsten-based alloys for gyrorotor

GJB 1077A-2008 钨基高密度合金穿甲弹用钨粉规范

本规范规定了钨基高密度合金穿甲弹用钨粉的要求、质量保证规定和交货准备等。 本规范适用于氢还原法制得的钨粉。

Specification for tungsten powder for tungsten base hign density alloy penetrator

YS/T 568.10-2008 氧化锆、氧化铪化学分析方法 锰量的测定 高碘酸钾分光光度法

本部分规定了氧化锆及氧化铪中锰含量的测定方法。 本部分适用于氧化锆及氧化铪中锰含量的测定。测定范围：0.003%～0.03%。

Chemical analysis methods for zirconium oxide and hafnium oxide.Determination of manganese content.Potassium periodate spectrophotometric method

YS/T 568.11-2008 氧化锆、氧化铪化学分析方法镍量的测定 α-联呋喃甲酰二肟分光光度法

本部分规定了氧化锆及氧化铪中镍含量的测定方法。 本部分适用于氧化锆及氧化铪中镍含量的测定。测定范围：0.0005%～0.03%。

Chemical analysis methods for zirconium oxide and hafnium oxide.Determination of nickle content.α-Furil dioxime spectrophotometric method

YS/T 676-2008 钼铝中间合金

本标准规定了钼铝中间合金的要求、试验方法、检验规则和标志、包装、运输、贮存及订货单（或合同）内容。 本标准适用于铝热还原法生产的、钛合金添加用钼铝中间合金。

Molybdenum-aluminium intermediate alloy

YS/T 508-2008 钨钼合金化学分析方法 EDTA容量法测定钼量

本标准规定了钨钼合金中钼含量的测定方法。 本标准适用范围于钨钼合金中钼含量的测定。测定范围：20%～80%。

Method for chemical analysis of tungsten-molybdenum alloy.The EDTA volumetric method for the determination of molybdenum content

YS/T 568.1-2008 氧化锆、氧化铪化学分析方法 氧化锆和氧化铪合量的测定 苦杏仁酸重量法

本部分规定了氧化锆及氧化铪中氧化锆和氧化铪合量的测定方法。 本部分适用于氧化锆及氧化铪中氧化锆和氧化铪合量的测定。测定范围：75%～99%。

Chemical analysis methods for zirconium oxide and hafnium oxide.Determination of zirconium oxide and hafnium oxide total content.Mandelic acid gravimetric method

YS/T 568.2-2008 氧化锆、氧化铪化学分析方法 铁量的测定 磺基水杨酸分光光度法

本部分规定了氧化锆、氧化铪中铁含量的测定方法。 本部分适用于氧化锆和氧化铪中铁含量的测定。测定范围：0.03%～2.0%。

Chemical analysis methods for zirconium oxide and hafnium oxide.Determination of iron content.Sulfosal icylic acid spectrophotometric method

YS/T 568.3-2008 氧化锆、氧化铪化学分析方法 硅量的测定 钼蓝分光光度法

本部分规定了氧化锆及氧化铪中硅含量的测定方法。 本部分适用于氧化锆及氧化铪中硅含量的测定。测定范围：0.005%～0.7%。

Chemical analysis methods for zirconium oxide and hafnium oxide.Determination of silicon content.Spectrophotometric method with the reduced silicomolybdic complex

YS/T 568.4-2008 氧化锆、氧化铪化学分析方法 铝量的测定 铬天青S-氯化十四烷基吡啶分光光度法

本部分规定了氧化锆及氧化铪中铝含量的测定方法。 本部分适用于氧化锆及氧化铪中铝含量的测定。测定范围：0.005%～0.2%。

Chemical analysis methods for zirconium oxide and hafnium oxide.Determination of aluminium content.Chronic azurol-S-tetradrcylpyridine chloride spectrophotometric method

YS/T 568.5-2008 氧化锆、氧化铪化学分析方法 钠量的测定 火焰原子吸收光谱法

本部分规定了氧化锆和氧化铪中钠含量的测定方法。 本部分适用于氧化锆和氧化铪中钠含量的测定。测定范围：0.01%～1%。

Chemical analysis methods for zirconium oxide and hafnium oxide.Determination of sodium content.Flame atomic absorption spectrometric method

YS/T 568.6-2008 氧化锆、氧化铪化学分析方法 钛量的测定 二安替吡啉甲烷分光光度法

本部分规定了氧化锆和氧化铪中钛含量的测定方法。 本部分适用于氧化锆和氧化铪中钛含量的测定。测定范围：0.005%～2.5%。

Chemical analysis methods for zirconium oxide and hafnium oxide.Determination of titamium content.Diantipyrylmethane spectrophotometric method

YS/T 568.7-2008 氧化锆、氧化铪化学分析方法 磷量的测定 锑盐-抗坏血酸-磷钼蓝分光光度法

本部分规定了氧化锆和氧化铪中磷含量的测定方法。 本部分适用于氧化锆和氧化铪中磷含量的测定。测定范围：0.005%～0.8%。

Chemical analysis methods for zirconium oxide and hafnium oxide.Determination of phosphorus content.The reduced molybdoantimonylphosphate complex spectrophotometric method

YS/T 568.8-2008 氧化锆、氧化铪化学分析方法 氧化锆中铝、钙、镁、锰、钠、镍、铁、钛、锌、钼、钒、铪量的测定 电感耦合等离子体发射光谱法

本部分规定了氧化锆中铝、钙、镁、锰、钠、镍、铁、钛、锌、钼、钒、铪含量的测定方法。 本部分适用于氧化锆中铝、钙、镁、锰、钠、镍、铁、钛、锌、钼、钒、铪含量的测定。测定范围见表1。

Chemical analysis methods for zirconium oxide and hafnium oxide.Determination of Al, Ca, Mg, Mn, Na, Ni, Fe, Ti, Zn, Mo, V, Hf content in zirconium oxide.Inductively coupled plasma atomic emission spectrometry