共找到 4134 条与 焊接与切割 相关的标准,共 276 页
本标准规定了金属材料对接焊接头宽板拉伸试样(简称试样)的尺寸、要求、制备及试验方法。 本标准适用于测定接近实际结构的对接焊接头宽板拉伸试样的抗拉强度。
Method of wide plate tension test for butt welded joint
本标准规定了锅炉受压元件焊接接头的机械性能试验方法,包括拉伸试验(常温和高温)、弯曲试验和冲击试验(常温)。 本标准适用于固定式锅炉受压元件上的对接接头。
Boiler pressure parts. Mechanical test for welded joints
Test methods for soft soldering fluxes—Part 6: Determination of halide(excluding fluoride)content
本标准规定了焊条烘干炉可比单耗分等指标、计算方法、运行管理、等级评定条件。 本标准适用于电力、原煤、城市煤气、天然气、液化气、燃料油为能源的具有药皮的手工电弧焊接用的焊条的烘干炉能耗分等与评审。
Energy consumption standard in operation of covered electrode furnace
Fluxes for the submerged arc welding of low alloy steel
本标准规定了钢熔化焊接头的要求及缺陷的分级。 本标准适用于熔焊方法施焊的对接和角接(搭接及T型)接头。
Quality assurance of welding--Requirement for fusion welding joint of steel and classification for imperfection
本标准规定了低合金钢埋弧焊用焊剂的型号划分方法、焊剂技术要求、焊剂检验方法、焊剂质量证明书及包装与标记。 本标准适用于低合金钢埋弧焊用焊剂。
Fluxes for the submerged arc welding of low alloy steel
本标准规定了用夏比冲击试验测定金属材料焊接接头的应变时效敏感性的试验方法。 本标准适用于熔焊对接接头。
Method of strain-age sensibility test for welded joint
本标准规定了金属材料焊缝及熔敷金属的拉伸试验方法,以测定其拉伸强度和塑性。 本标准适用于采用焊条或填充焊丝的熔化焊接。
Methods of tensile tests for weld and deposited metal
本标准规定了金属材料焊接接头和堆焊金属的硬度试验方法,用以测定洛氏、布氏、维氏硬度。 本标准适用于熔焊和压焊焊接接头和堆焊金属。
Methods of hardness tests for welded joint and surfacing metal
本标准规定了硬钎焊接头常规拉伸与剪切的试验方法及软钎焊接头常规剪切的试验方法。 本标准适用于黑色金属、有色金属及其合金的硬钎焊接头在低温、室温、高温时的瞬时拉伸、剪切强度以及软钎焊接头在低温、室温、高温时的瞬时剪切强度的测定。
Methods of the strength tests for brazed and soldered joint
本标准规定了检验钎料在母材上的铺展性及填缝性的试验方法。 本标准适用于各类软、硬钎料的铺展性及填缝性的评定。
Test method of spreadability and clearance filling ability for filler metal
Test method of spreadability and clearance filling ability for filler metal
本标准规定了金属材料焊接接头横向拉伸试验和点焊接头的剪切试验方法,以分别测定接头的抗拉强度和抗剪负荷。 本标准适用于熔焊和压焊对接接头。
Method of tensile test for welded joint
Methods of the strength tests for brazed and soldered joint
本标准规定了金属材料焊接接头的夏比冲击试验方法,以测定试样的冲击吸收功。 本标准适用于熔焊和压焊对接接头。
Method of impact test for welded joint
本标准规定了金属材料焊接接头的拉伸、冲击、弯曲、压扁、硬度及点焊剪切等试验的取样方法。 本标准适用于熔焊及压焊的焊接接头。
Methods of sampling for mechanical properties tests of welded joint
本标准规定了金属材料焊接接头的横向正弯及背弯试验、横向侧弯试验、纵向正弯及背弯试验、管材压扁试验方法,以检验接头拉伸面上的塑性及显示缺陷。 本标准适用于熔焊和压焊对接接头。
Methods of bend and compression tests for welded joint
本标准规定了铝及铝合金焊丝的分类、型号、技术要求及检验规则。 本标准适用于惰性气体保护焊、等离子弧焊、气焊等焊接方法用的铝及铝合金焊丝。
Aluminum and aluminium alloy welding rods and wires
本标准规定了镍基钎料的分类、牌号、技术要求及检验规则。 本标准适用于炉中钎焊、感应钎焊和电阻钎焊等方法使用的镍基钎料。
Nickel base brazing filler metals
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号