J33 焊接与切割 标准查询与下载

T/CWAN 0017-2021 绞股焊丝

本文件规定了绞股焊丝的术语和定义、型号分类、主要结构、生产工艺流程、技术要求、试验方法、检验规则、供货条件、包装、标志和品质证书等内容。 本文件适用于气体保护焊、埋弧焊、激光焊和复合焊等焊接方法所使用的非合金钢及细晶粒钢、热强钢、高强钢、不锈钢、镍基合金、铝合金、钛合金、铜合金、镁合金等实心焊丝或药芯焊丝及其组合焊丝等。

Multi-stranded Wires

T/CWAN 0056-2021 电弧焊焊接烟尘组分

本文件给出了焊接材料、母材、涂层和污染物等在电弧焊过程中排放的焊接烟尘组分。 本文件适用于电弧焊用非合金钢、低合金钢、高合金钢、铝基、镍基、铜基、铸铁、耐磨堆焊和加 工硬化等焊接材料。

Arc welding fume components

T/CWAN 0033-2021 铝合金搅拌摩擦焊体积型缺陷相控阵超声检测规范

本文件规定了采用相控阵超声检测技术（Phased-array ultrasonic testing，PAUT）检测铝合金搅拌摩 擦焊接头体积型缺陷的检测要求及检测结果分级。 本文件适用于厚度为1.5 mm~10 mm的铝合金搅拌摩擦焊接头的检测与评定。其它接头形式、其它 厚度的接头检测与评定可参照执行

Specification for phased array ultrasonic testing of volumetric defects in friction stir welding of aluminum alloys

ISO 3834-5:2021 金属材料的熔化焊质量要求. 第5部分: 有必要声明和ISO 3834-2、ISO 3834-3或ISO 3834-4质量要求一致的文件

This document specifies the International Standards, including clauses and subclauses, with which conformity to the quality requirements of ISO 3834-2, ISO 3834-3 or ISO 3834-4 can be claimed. NOTE For brazing, see ISO 22688.

Quality requirements for fusion welding of metallic materials - Part 5: Documents with which it is necessary to conform to claim conformity to the quality requirements of ISO 3834-2, ISO 3834-3 or ISO 3834-4

ISO 3834-1:2021 金属材料的熔化焊质量要求. 第1部分: 质量要求的适当等级的选择标准

This document specifies a general outline of the ISO 3834 series and criteria to be taken into account for the selection of the appropriate level of quality requirements for fusion welding of metallic materials, among the three levels specified in ISO 3834-2, ISO 3834-3 and ISO 3834-4. It is applicable to manufacturing, both in workshops and at field installation sites. This document does not specify requirements for a total quality management system (QMS). However, Clause 6 identifies QMS elements where their inclusion complements the ISO 3834 series.

Quality requirements for fusion welding of metallic materials - Part 1: Criteria for the selection of the appropriate level of quality requirements

T/CWAN 0021-2021 金锡合金预成形焊片及应用推荐规范

本文件规定了金锡合金预成形焊片的技术要求、检验规则和应用推荐规范。本文件适用于微电子器件电路封装、半导体分立器件封装及集成电路金属外壳封装用金锡合金预成形焊片。

Au-Sn solder preforms and recommended application profile

DIN EN 12814-2:2021 热塑性塑料半成品的焊接接头试验. 第2部分: 拉伸试验; 德文版本EN 12814-2-2021

This standard specifies the dimensions, the method of sampling, the preparation of the test specimens and the conditions for performing the tensile test in order to determine the short term tensile welding factor. A tensile test may be used in conjunction with other tests (e. g.

Testing of welded joints of thermoplastics semi-finished products - Part 2: Tensile test; German version EN 12814-2:2021

JIS Z 3321:2021 焊接用不锈钢棒、线和带状电极

Stainless steel rods, wires and strip electrodes for welding

JIS Z 3323:2021 弧焊用不锈钢管状焊丝和焊条

Stainless steel flux cored wires and rods for arc welding

T/CWAN 0005-2021 整流器件用无铅钎料回流焊焊接推荐工艺规范

本文件规定了整流器件用无铅钎料回流焊焊接推荐工艺规范。 本文件适用于厚度≤0.8 mm的金属铜回流焊。

Recommended practice for reflow soldering of lead-free solder for rectifier devices

ISO 8167:2021 电阻焊. 凸焊. 电阻焊用凸焊

This document specifies the geometries and dimensions of projections for embossed projection welding. Tools to make the projections are also included in Annex B. The projections are used on hot-rolled, cold-rolled, uncoated and coated steels, stainless steels and nickel alloys for conventional welding quality up to 3 mm thickness, as single projections, in multiples or as a group of multiples. Any solid projections are not included in this document.

Resistance welding - Embossed projection welding - Projections for resistance welding

T/CWAN 0057-2021 埋弧自动横焊焊接工艺规范

本文件规定了船舶和钢结构建造中埋弧自动横焊的术语和定义、一般要求、焊接设备、焊接材料、焊接坡口及焊接工艺要求、焊后检测和返修、安全防护等内容。 本文件适用于厚度10 mm~60 mm碳素结构钢（Q235A、Q235B、Q235C、Q235D、Q275A、Q275B、Q275C、Q275D钢）、低合金高强度结构钢（Q355B、Q355C、Q355D、Q355NB、Q355NC、Q355ND、Q355MB、Q355MC、Q355MD、Q390B、Q390C、Q390D、Q390NB、Q390NC、Q390ND、Q390MB、Q390MC、Q390MD、Q420B、Q420C、Q420NB、Q420NC、Q420ND、Q420MB、Q420MC、Q420MD钢）及其他化学成分相近且力学性能相当钢材的埋弧自动横焊焊接。

Welding procedure specification for automatic horizontal submerged arc welding

T/CWAN 0058-2021 摆动埋弧自动焊焊接工艺规范

本文件规定了船舶和钢结构建造中摆动埋弧自动焊的术语和定义、一般要求、焊接设备、焊接材料、焊接坡口及焊接工艺要求、焊后检测和返修、安全防护等内容。 本文件适用于厚度15 mm~60 mm碳素结构钢（Q235A、Q235B、Q235C、Q235D、Q275A、Q275B、Q275C、Q275D钢）、低合金高强度结构钢（Q355B、Q355C、Q355D、Q355NB、Q355NC、Q355ND、Q355MB、Q355MC、Q355MD、Q390B、Q390C、Q390D、Q390NB、Q390NC、Q390ND、Q390MB、Q390MC、Q390MD、Q420B、Q420C、Q420NB、Q420NC、Q420ND、Q420MB、Q420MC、Q420MD钢）及其他化学成分相近且力学性能相当钢材的平焊位置摆动埋弧自动焊焊接。

Welding procedure specification for automatic swing submerged arc welding

DIN EN ISO 22826:2021 金属材料焊缝破坏性试验. 激光和电子束焊接窄接头的硬度试验(维氏和努氏硬度试验)(ISO 22826-2005); 德文版 EN ISO 22826-2021

ISO 22826:2005 specifies the requirements for hardness testing of transverse sections of narrow laser and electron beam welded joints in metallic materials. It covers Vickers and Knoop hardness tests in accordance with ISO 6507-1 and ISO 4545, respectively, with test forces of 0,

Destructive tests on welds in metallic materials - Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness tests) (ISO 22826:2005); German version EN ISO 22826:2021

ISO 3834-2:2021 金属材料的熔化焊质量要求. 第2部分: 完整质量要求

This document defines comprehensive quality requirements for fusion welding of metallic materials both in workshops and at field installation sites.

Quality requirements for fusion welding of metallic materials - Part 2: Comprehensive quality requirements

JIS Z 3197:2021 助焊剂的试验方法

Test methods for soldering fluxes

JIS Z 3234:2021 电阻焊电极材料和辅助设备

Materials for resistance welding electrodes and ancillary equipment

JIS Z 3141:2021 搭接缝焊接接头的试验方法

Method of tests for lap seam welded joints

T/CWAN 0043-2021 搅拌摩擦焊搅拌头设计及制造标准

本文件规定了搅拌摩擦焊搅拌头设计、制造及使用技术条件。范围包括搅拌摩擦焊用的搅拌头设计及制造、焊接的一般要求、焊前准备、焊接工艺、焊后检验和试验以及安全要求 等。

Design and manufacturing standard of friction stir welding tool

T/CWAN 0022-2021 静止轴肩搅拌摩擦焊焊具设计及制造规范

本文件规定了静止轴肩搅拌摩擦焊焊具定义、作用、设计、制造及焊接技术条件的范围包括静止轴肩搅拌摩擦焊用的焊具设计及制造和安全要求等。本文件适用于各种材料的静止轴肩搅拌摩擦焊焊接用焊具。

Specification for design and manufacture of FSW stationary shoulder welding tool