J47 手工工具 标准查询与下载

QB/T 1737-2011 胡桃钳

本标准规定了断线钳的产品分类、技术要求、试验方法、检验规则及包装、标志、运输与贮存。 本标准适用于木工用胡桃钳和一般作业用胡桃钳。

Carpenter's pincers

QB/T 2206-2011 断线钳

本标准规定了断线钳的产品分类、技术要求、试验方法、检验规则及包装、标志、运输与贮存。 本标准适用于剪切普通碳素结构钢线材、电缆、硬铜线等材料的断线钳。

Bolt cutters

QB/T 4266-2011 扎线钳

本标准规定了扎线钳的产品分类、技术要求、试验方法、检验规则及包装、标志、运输与贮存。 本标准适用于建筑工用扎线钳和一般作业用扎线钳。

Construction worker's pincers

QB/T 4265-2011 异型大力钳

本标准规定了异性大力钳产品分类和标记、技术要求、试验方法、检验规则和包装、标志、运输与贮存。 本标准适用于装配和维修作业用异型夹持式和管夹式大力钳。

Special locking pliers

ISO 2296:2011 带有细齿和粗齿的金属开槽锯.公制系列

Metal slitting saws with fine and coarse teeth - Metric series

DIN 4003-80:2011 按照DIN 4000,基于性能的三维模型设计概念.第80部分:螺丝结合片,冷成型丝锥和螺纹板牙

Concept for the design of 3D models based on properties according to DIN 4000 - Part 80: Screwing tabs, cold forming taps and screwing dies

BS ISO 1174-1:2011 螺丝和螺母用装配工具.驱动方头.手动套筒工具用驱动方头

Assembly tools for screws and nuts. Driving squares. Driving squares for hand socket tools

DIN EN 15895:2011 弹药推动手持工具.安全要求.打钉和硬标记工具;德文版本EN 15895-2011

This European standard covers safety requirements for cartridge operated fixing and hard marking tools which operate with an intermediate member (piston). This European standard deals with all significant hazards, hazardous situations and events relevant to cartridge operated fixing and hard marking tools, when they are used as intended and under conditions of misuse which are reasonably foreseeable.

Cartridge operated hand-held tools - Safety requirements - Fixing and hard marking tools; German version EN 15895:2011

BS ISO 3315:2011 螺钉和螺母用装配工具.手动方榫传动套筒扳手的传动附件.尺寸和试验

Assembly tools for screws and nuts. Driving parts for hand-operated square drive socket wrenches. Dimensions and tests

NF E27-819:2011 模块.操作的手持工具.安全要求.修复和标记工具.

Cartridge-operated hand-held tools - Safety requirements - Fixing and marking tools.

NF E74-365:2011 螺钉和螺母用装配工具.手动方榫传动套筒扳手传动件.尺寸和试验.

Assembly tools for screws and nuts - Driving parts for hand-operated square drive socket wrenches - Dimensions and tests.

BS EN 15895:2011 弹药推动的手持式工具.安全性要求.固定和硬标记工具

This European standard covers safety requirements for cartridge operated fixing and hard marking tools which operate with an intermediate member (piston). This European standard deals with all significant hazards, hazardous situations and events relevant to cartridge operated fixing and hard marking tools, when they are used as intended and under conditions of misuse which are reasonably foreseeable (see Clause 4). It deals with the significant hazards in the different operating modes and intervention procedures as referred to in EN ISO 12100-1:2003, 5.3. Although the safe use of cartridge operated tools depends to an important extent on the use of appropriate cartridges and fasteners, this standard is not formulating requirements for the cartridges and fasteners to be used with the tools (see Clause 7). This European Standard applies to tools designed for use with cartridges with casings made of metal or plastic and with solid propellant and containing a minor quantity of primer with a composition different from that of the main propellant. The fixing tools in the scope are those intended for use with fasteners made from metal. NOTE Information about cartridges can be found in the publication of the Permanent International Commission for the Proof of Small Arms (C.I.P.). This European standard is not applicable to cartridge operated fixing and hard marking tools which are manufactured before the date of its publication as EN.

Cartridge operated hand-held tools. Safety requirements. Fixing and hard marking tools

QB/T 4207-2011 一字槽螺钉旋具头

本标准规定了机用一字槽螺钉旋具头的产品分类、技术要求、试验方法、检验规则、包装、标志、运输与贮存。 本标准适用于机用一字槽螺钉旋具头。

Screwdriver bits for slotted head screws

QB/T 4206-2011 螺钉旋具头传动端和连接件

本标准规定了手用和机用螺钉旋具头传动端尺寸和连接件的产品分类、技术要求、试验方法、检验规则、包装、标志、运输与贮存。 本标准适用于手用和机用螺钉旋具头传动端和连接件。

Drive ends for hand-and machine-operated screwdriver bits and connecting parts

QB/T 4209-2011 内六角螺钉旋具头

本标准规定了机用内六角螺钉旋具头的产品分类、技术要求、试验方法、检验规则、包装、标志、运输与贮存。 本标准适用于机用内六角螺钉旋具头。

Screwdriver bits for hexagon socket screws

QB/T 2212.7-2011 建筑工具（泥工类）勾缝器

本标准适用于QB/T 2212.1建筑工具（泥工类）通用技术条件中规定的分格器、缝溜子、缝扎子。 本标准规定了勾缝器的产品分类、技术要求、试验方法、检验规则及包装、标志、运输与贮存。

Builder's tools (masonry).Groovers

QB/T 4208-2011 十字槽螺钉旋具头

本标准规定了机用十字槽螺钉旋具头的产品分类、技术要求、试验方法、检验规则、包装、标志、运输与贮存。 本标准适用于机用十字槽螺钉旋具头。

Screwdriver bits for cross-recessed head screws

QB/T 2212.1-2011 建筑工具（泥工类）通用技术条件

本标准规定了建筑工具(泥工类)的分类与命名、技术要求、试验方法、检验规则及包装、标志、运输、贮存。 本标准的工具图示仅是示例，并不影响对产品的设计。

Builder's tools (masonry).Gengeral requirements

QB/T 4205-2011 螺钉旋具头通用技术条件

本标准规定了手用和机用螺钉旋具头及其连接件的技术要求、试验方法、检验规则及包装、标志、运输、贮存。 本标准适用于手用和机用螺钉旋具头和相关连接件。

Screwdriver bits.General requirements

QB/T 2212.5-2011 建筑工具（泥工类）砌刀

本标准适用于QB/T 2212.1《建筑工具（泥工类）通用技术条件》中规定的砌刀。 本标准规定了砌刀的产品分类、技术要求、试验方法、检验规则及包装、标志、运输、贮存。

Builder's tools (masonry).Brick knives