J53 车床 标准查询与下载

BS 4656-35:1987 机床精度和测试方法 绞盘、转塔和自动车床规范 单轴类型直径小于 25 毫米

Accuracy requirements and geometrical tests with reference to BS 3800.

Accuracy of machine tools and methods of test. Specification for capstan, turret and automatic lathes, single spindle type less than 25 mm diameter capacity

DIN 24900-110:1987 工程和相关领域用图形符号.机床.多轴自动车床用检查和分配示例

Graphical symbols for use in the engineering and related fileds; machine tools; review and assignment examples for multi-spindle automatic lathe

ISO 6155-2:1986 卧式单轴六角刀架转塔自动车床的验收条件.精度试验.第2部分:可加工棒材直径为25mm以下,卡盘直径至160mm

Acceptance conditions for horizontal spindle capstan, turret and single spindle automatic lathes; Testing of the accuracy; Part 2 : Machinable bar diameters 25 mm or less and chuck diameter up to 160 mm

JIS B 6331:1986 数控车床性能和加工精度试验规程

この規格は，べッド上の振り2000 mm以下，往復台のZ輪方向の移動量10 000 mm以下の数値制御旋盤の運転性能，鋼性，機械精度及び工作精度に関する試験及び検査方法について規定する。

Test code for performance and accuracy of numerically controlled lathes

JIS B 6202:1986 车床的试验及检验方法

Test code for performance and accuracy of lathes

JIS B 6215:1986 六角车床的性能和准确度的试验方法

Test code for performance and accuracy of turret lathes

NF E60-107:1985 机床.仿形车床和仿形辅助装置.验收条件.精确度测试

Machine-tools. Copying lathes and copying attachments. Acceptance conditions. Testing of accuracy.

JB/T 1464-1994 单轴纵切自动车床精度

本标准规定了单轴纵切自动车床的几何精度和工作精度的要求及检验方法。 本标准适用于最大棒料直径至32mm的普通精度级的单轴纵切自动车床。

Single axis longitudinal cutting automatic lathe precision

NF E60-106:1984 单柱或双柱立式车床和镗床的验收条件和专用术语.第2部分：带单个固定或可移动工作台的车床.精确度检测

Acceptance conditions and nomenclature for vertical turning and boring lathes with one or two columns. Part 2 : lathes with a single fixed or movable table. Testing of accuracy.

NF E60-105:1984 单柱或双柱立式车床和镗床的验收条件.第1部分:总概

Acceptance conditions for vertical turning and boring lathes with one or two columns. Part 1 : general introduction.

BS 4656-1:1981 机床精度及试验方法.第1部分:普通车床规范

Geometrical and practical tests and corresponding permissible deviations.

Accuracy of machine tools and methods of test - Specification for lathes, general purpose type

BS 4656-29:1981 机床精度及试验方法.第29部分:多轴(分度回轮)自动车床规范

Geometrical and practical tests and corresponding permissible deviations.

Accuracy of machine tools and methods of test - Specification for automatic lathes, multi-spindle (indexing drum) type

ISO 6155-1:1981 卧式单轴六角刀架转塔自动车床的验收条件.精度试验.第1部分:可加工棒材直径大于25mm

Acceptance conditions for horizontal spindle capstan, turret and single spindle automatic lathes; Testing of the accuracy; Part 1 : Machinable bar diameters greater than 25 mm

DIN 8609-2:1979 机床.单柱立式车镗床.验收条件

Machine tools; vertical turning and boring lathes with one column; acceptance conditions Machines-outils; tours verticaux à un montant; conditions de réceptionZusammenhang mit der von der International Organization for Standardization (ISO) herausgegeben

Machine tools; vertical turning and boring lathes with one column, acceptance conditions

DIN 8609-1:1979 机床.立式车床镗床.验收条件.一般介绍

Machine tools; vertical turning and boring lathes; acceptance conditions, general introduction Machines-outils; tours verticaux; conditions de réception, introduction généraleZusammenhang mit der von der International Organization for Standardization (IS

Machine tools; vertical turning and boring lathes, acceptance conditions, general introduction

DIN 8609-3:1979 机床.第3部分:立式车床和双柱式车床.验收条件

Machine tools; vertical turning and boring lathes with two columns; acceptance conditions Machines-outils; tours verticaux à deux montants; conditions de réceptionZusammenhang mit der von der International Organization for Standardization (ISO) herausgeg

Machine tools; vertical turning and boring lathes with two columns, acceptance conditions

HB 2791-1976 立式六角车床用锥柄工具浮动夹头

Floating Chuck for Taper Shank Tools for Vertical Hexagonal Lathes

HB 2720-1976 卧轴式六角车床辅助工具及附件技术条件

Specifications for auxiliary tools and accessories of horizontal axis hexagonal lathes

HB 2755-1976 立轴式六角车床辅助工具技术条件

Specifications for auxiliary tools for vertical-axis hexagonal lathes

HB 2775-1976 立式车床用斜向固定镗刀杆（带拨销槽）

Vertical lathe with oblique fixed boring bar (with pin slot)