J53 车床 标准查询与下载

HB 2776-1976 立式车床用垂直固定镗刀杆

Vertical fixed boring bar for vertical lathe

HB 2777-1976 立式车床用斜向固定双刀镗刀杆

Vertical lathe with obliquely fixed double-cutter boring bar

HB 2780-1976 立式车床用长转接衬套（带拨销槽）

Long adapter bushings for vertical lathes (with pin slots)

HB 2782-1976 车床辅助工具技术条件

Technical conditions of lathe auxiliary tools

HB 2793-1976 六角车床用浮动夹头支架

Floating chuck bracket for hexagonal lathe

HB 2794-1976 浮动夹头技术条件

Floating Chuck Specifications

DIN 8605:1976 机床.高精度车床.旋转直径至500mm.车床中心距至1500mm.验收条件

Machine tools; lathes, high accuracy; swing up to 500 mm, turning length up to 1500 mm, acceptance conditions Machines-outils; tours de haute précision; diamètre au-dessus du banc jusqu'à 500 mm et longueur de tournage jusqu'à 1500 mm, conditions de récep

Machine Tools; Lathes of High Accuracy Swing up to 500 mm, Turning Length up to 1500 mm, Acceptance Conditions

DIN 8606:1976 机床.标准精度车床.旋转直径至800mm.验收条件

Machine Tools; Lathes of Normal Accuracy; Swing up to 800 mm; Acceptance Conditions

DIN 8607:1976 机床.旋转直径800 至1600mm标准精度车床.验收条件

Machine tools; lathes of normal accuracy; swing above 800 up to 1600 mm, acceptance conditionsMachines-outils; tours de précision normale; diamètre au-dessus du banc au-delà de 800 jusqu'à 1600 mm, conditionsde réceptionZusammenhang mit der von der Int

Machine Tools; Lathes of Normal Accuracy, Swing above 800 up to 1600 mm; Acceptance Conditions

NF E60-102:1976 数控平行车床的试验条件.精确度测试

Test conditions for numerical control parallel lathes. Testing of the accuracy.

DIN 8611-3:1976 机床.卧式自动车床.瑞士型自动车床.验收条件

Machine tools; horizontal automatic lathes; swiss type automatic lathes; acceptance conditionsMachines-outils; tours automatiques horizontaux; tours à poupée mobile ou du type suisse; conditions de réception

Machine Tools; Horizontal Automatic Lathes; Swiss-Type Automatic Lathes; Acceptance Conditions

DIN 8611-1:1976 机床.卧式单轴自动车床.验收条件

Machine tools; horizontal single spindle automatic lathes; acceptance conditionsMachines-outils; tours automatiques horizontaux, monobroche; conditions de réception

Machine Tools; Horizontal Single-spindle Automatic Lathes; Acceptance Conditions

DIN 8611-2:1976 机床.正面装载的卧式自动车床.验收条件

Machine tools; front loaded automatic lathes; acceptance conditionsMachines-outils; tours automatiques horizontaux travaillant frontalement; conditions de réception

Machine Tools; Horizontal Automatic Lathes; Front-loaded; Acceptance Conditions

NF E60-022:1971 车床丝杠的螺矩(数控车床除外)

Pitches of screw lead of lathes (other that numerical controlled lathes).

ASME B5.9-1967 工具室车床,普通车床,六角车床和自动车床的轴头

These spindle noses are for use on engine lathes, tool room lathes, turret lathes and automatic lathes and may be used advantageously on other machines wherever chucks or fixtures must be mounted accurately and rigidly on revolving spindles. Complete dimensions for each size and type of nose, as well as for mating backs of chucks, face plates and fixtures, are given in the tables. Also given are dimensions of gages for checking the important dimensions on these spindle noses and the backs of chucks, face plates and fixtures, to insure interchangeability between parts made by different manufacturers.

Spindle Noses for Tool Room Lathes, Engine Lathes, Turret Lathes, and Automatic Lathes

ANSI/ASME B5.9-1967 工具车床、普通车床、六角车床和自动车床的轴头

These spindlenoses are for use on engine lathes, tool room lathes, turret lathes and automatic lathes and may be used advantageously on other machines wherever chucks or fixtures must be mounted accurately and rigidly on revolving spindles. Complete dimensions for each size and type of nose, as well as for mating backs of chucks, face plates and fixtures, are given in the tables. Also given are dimensions of gages for checking the important dimensions on these spindlenoses and the backs of chucks, face platesand fixtures, to insure interchangeability between parts made by different manufacturers.

Spindle Noses for Tool Room Lathes, Engine Lathes, Turret Lathes, and Automatic Lathes

ANSI B5.9-1967 工具车间车床、普通车床、转塔车床和自动车床用轴头

These spindlenoses are for use on engine lathes, tool room lathes, turret lathes and automatic lathes and may be used advantageously on other machines wherever chucks or fixtures must be mounted accurately and rigidly on revolving spindles. Complete dimensions for each size and type of nose, as well as for mating backs of chucks, face plates and fixtures, are given in the tables. Also given are dimensions of gages for checking the important dimensions on these spindlenoses and the backs of chucks, face platesand fixtures, to insure interchangeability between parts made by different manufacturers.

Spindle Noses for Tool Room Lathes, Engine Lathes, Turret Lathes, and Automatic Lathes

ANSI B94.3-1965 车床和螺旋机械的直的切削片

Provides definitions, type designations, and dimensions for straight cut-off blades, solid and inserted, for lathe and screw machines

Straight Cut-Off Blades for Lathes and Screw Machines

NF E66-364:1961 带高速钢插头的车削机床.开角用偏车削机床

Turning tools with speed steel inserts. Offset turning tools for corner work.

NF E66-367:1961 带高速钢插头的车削机床.造型车削机床

Turning tools with speed steel inserts. Parting off turning tools.