J72 压缩机、风机 标准查询与下载

EN 16500:2014 用于压缩废料或可循环部分的机器.直立包装机.安全要求

This European Standard specifies the safety requirements for the design, manufacture and information for safe use of vertical baling presses for compacting waste material or recyclable fractions (e. g. paper, plastics, textiles, cans, cardboard, mixed waste), hereafter referred to as materials. This standard covers vertical baling presses:- that are manually or mechanically fed; and; - with fixed enclosed baling chambers (single or multiple chamber presses); and; - with a mechanically, hydraulically or pneumatically operated compacting equipment; and; - where the compacted bale is tied manually in the baling chamber; and; - with manual unloading or mechanical ejection of the compacted bale. The scope of this standard includes any mechanical feed equipment, such as belt type conveyors or bin lifts, forming an integral part of the baling press assembly. It also includes integral material flow control equipment. This standard does not apply to; - vertical baling presses without fixed enclosed baling chamber(s); or; - round balers or roll baling machines; or; - machines where the material is compacted into a bag; or; - pneumatic conveying systems; or; - equipment for transporting the bales; or; - local exhaust ventilation for the removal of dusts or vapours; or; - hazards arising from any integral pre-conditioning equipment; or; - hazards arising from the materials being processed (e. g. asbestos, clinical waste, flammable or explosive materials, unhealthy or poisonous waste). This standard does not apply to cranes, lift trucks or other mobile plant used to load materials into the feed opening. Nor does it apply to hazards arising from loading materials into the feed opening using cranes, lift trucks or other mobile plant. This standard does not include specifications to meet the requirements of the ATEX Directive 94/9/EC. All hazards mentioned in Clause 4 are dealt with in this European Standard. This European Standard is not applicable for vertical baling presses whic

Machines for compacting waste materials or recyclable fractions - Vertical baling presses - Safety requirements

KS B ISO 1119:2014 产品几何量技术规范(GPS).锥度和锥度角系列

이 표준은 기계 공학에서 일반적으로 사용할 수 있도록 범위가 120°로부터 1°보다 적은 범위, 또는 비율이 1:0.289에서 1:500까지의 범위를 가진 원뿔 또는 원뿔형 테이퍼의 시리즈에 대하여 규정한다.이 표준은 오직 일반적인 원뿔 표면에만 적용되고, 프리즘 부품, 테이퍼 나사 및 베벨 기어 등은 제외된다.?

Geometrical product specifications(GPS) — Series of conical tapers and taper angles

JB/T 8689-2014 通风机振动检测及其限值

本标准规定了通风机运行的振动限值、测量通风机振动的测量部位、测量仪器的要求、被测产品的安装及测量时的运行条件。本标准适用于离心式、轴流式和混流式通风机产品出厂检验、型式试验和使用现场振动指标的验收。

Fan vibration detection and its limited value

JB/T 8940-2014 通风机 产品型号编制方法

本标准规定了通风机产品型号编制方法。本标准适用于离心通风机、轴流通风机。

Fans.Working out method for product model

JB/T 10214-2014 通风机 铆焊件技术条件

本标准规定了铆焊件的材料、主要铆焊件的拼接、样板的制造公差与有关号料的要求、铆焊件的落料公差、铆焊件的制造公差、铆接质量要求和螺栓联接质量要求。本标准适用于离心式和轴流式通风机中的铆焊件。其他风机中的铆焊件亦可参照使用。

Fans.Specifications of riveting and welding part

JB/T 8690-2014 通风机 噪声限值

本标准适用于一般形式的离心通风机和轴流通风机。对于混流风机,应根据其结构型式(偏于离心风机或轴流风机)参照执行。本标准不适用于屋顶、旋涡、特殊高压等型式和对噪声有特殊要求的通风机。

Fans.Noise limited value

JB/T 9100-2014 矿井局部通风机 技术条件

本标准规定了矿井局部通风机设计制造要求、安全要求、质量要求、试验方法、检验规则、标志和包装、保证期。本标准适用于环境温度-10℃~40℃,配用电动机驱动的矿井局部通风机(以下简称通风机)。

Auxiliary fans used for mine.Technical specification

JB/T 9101-2014 通风机转子平衡

本标准规定了通风机转子的平衡方法、平衡品质等级、平衡设备精度要求、校正方法及复验的规定。本标准适用于离心通风机、轴流通风机转子或叶轮的平衡。

Fan rotor balance

JB/T 10213-2014 通风机 焊接质量检验技术条件

本标准规定了通风机焊接质量的技术要求、检查方法、检验规则及质量记录。本标准适用于气焊、焊条电弧焊、埋弧焊和气体保护焊焊接碳素结构钢、低合金结构钢、不锈钢等材料制造的通风机的焊缝质量检验。用其他材料和焊接方法所焊接的焊缝也可参照使用。

Fans.Specifications for welding inspection

JB/T 4359-2014 一般用途轴流式压缩机

本标准规定了一般用途轴流式压缩机(以下简称压缩机)的压缩机设计、辅助设备、检验与试验、标志、包装、运输与保管等。本标准适用于输送介质为空气的轴流式压缩机,其升压大于200 kPa或压比大于3。对于输送介质为其他气体的轴流式压缩机可参考采用。

Axial compressor for general purpose

JB/T 4364-2014 风机配套消声器 性能试验方法

本标准规定了风机配套消声器的试验装置和设备仪器、试验条件、试验方法、读数方法及修正、试验记录和试验报告。本标准适用于阻性消声器。本标准不适用于控制射流噪声的排气放空消声器性能试验。

Performance test methods.Auxiliary silencer of fan

EN 16486:2014 用于压实废料或可回收碎片的机器 压实机 安全要求

This European Standard specifies the safety requirements for the design, manufacture and information for the safe use of compactors that compact waste material or recyclable fractions (e. g. paper, plastics, textiles, cans, cardboard, mixed waste), hereafter referred to as materials. This European Standard applies to:- compactors using a horizontally moving screw, pendulum or plate as compacting part and where the materials move horizontally; and; - compactors that are mechanically fed and/or fed by hand. These compactors can be; - static compactors; - transportable compactors; - traversing systems. The scope includes; - any integral mechanical feed equipment (e. g. bin lift); - feed hoppers/openings; - any integral pre-conditioning equipment in the hopper (e. g. perforators, pre-crushing devices and shredders); - any integral material flow control equipment; - the interface between the compactor and any feed equipment (except those excluded from the scope). The scope of this European Standard does not cover; - compactors that are covered by EN 1501 (all parts); - underground compactors, however if these compactors can be used above ground this standard applies; - compactors using thermal technologies for compaction; - vacuum compactors; - compactors where materials are compacted vertically; - containers for static compactors, however the interface between the compaction unit and the container is included; - bins in which materials are collected for feeding into the compactor; - any up-stream pre-treatment equipment that is not integral to the machine and is used to treat the materials before they are fed into the feed opening of the compactor; - vehicles including lifting equipment used to collect and transport the compactor or container; - cranes, lift trucks or other transportable plant used to load materials into the feed hopper/opening and the hazards arising out of using this equipment to load; - any suction or dust control equipment. This European standard do

Machines for compacting waste materials or recyclable fractions - Compactors - Safety requirements

JB/T 6411-2014 暖通空调用轴流通风机

本标准规定了暖通空调用轴流通风机(以下简称“通风机”)的术语和定义、型式与基本参数、要求、试验方法、检验规则及标志、包装和贮存。本标准适用于叶轮外径(d)不大于2 400 mm、体积流量范围为200 m/h~280000 m/h、静压范围为20 Pa~1200 Pa的单级轴流通风机。本标准不适用于自由风扇。

Axial fan for heating ventilation and air conditioner

JB/T 9099-2014 冷却塔轴流通风机

本标准规定了冷却塔轴流通风机(以下简称通风机)的技术要求、检验方法、检验规则、标志、包装和质量保证。本标准适应于介质温度在75℃以下、相对湿度小于100%,循环水系统用工业冷却塔强制通风的通风机。

Axial flow fans for cooling tower

JB/T 8694-2014 往复活塞氧气压缩机网状阀 技术条件

本标准规定了往复活塞氧气压缩机网状阀的技术要求、试验方法、检验规则、标志、包装与贮存。 本标准适用于往复活塞氧气压缩机网状阀（以下简称气阀），也适用于其他往复活塞气体压缩机网状阀。

Specifications for gauze gas valves used in reciprocating oxygen compressor

JB/T 8935-2014 工艺流程用压缩机安全要求

本标准规定了工艺流程用压缩机的安全通则、安全装置和防护设备的具体要求。本标准适用于离心、轴流、往复和回转等所有类型的工艺压缩机及其附属设备,包括驱动机、中间冷却器、缓冲器、分离器或净化器、中间连接管路和润滑、密封油及水冷却系统等。本标准不适用于:a)GB 22207-2008《容积式空气压缩机安全要求》规定的空气压缩机;b)压缩机零部件的基本机械设计;c)压缩机相关工艺装置的设计和操作。

Safety standard for compressors for process industries

JB/T 11848-2014 空气分离设备用离心式氧气压缩机

本标准规定了单轴型离心式氧气压缩机（以下简称氧压机）的基本参数、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于空气分离设备（以下简称空分设备）配套的介质为氧气、进气压力不大于0.1 MPa、排气压力不大于4MPa、最大流量为100 000 m/h （标态）的离心式氧气压缩机。非空分设备配套的氧压机亦可参照执行。

Oxygen centrifugal compressor used in air separation plants

JB/T 6430-2014 一般用喷油螺杆空气压缩机

本标准规定了一般用喷油螺杆空气压缩机(以下简称“螺杆空压机”)的术语和定义、型号、基本参数、要求、试验方法、检验规则、标志、包装和贮存。本标准适用于驱动机功率为2.2 kW~630 kW、额定排气压力为0.3 MPa (0.5 MPa)、0.7 MPa (0.8 MPa)、1.0 MPa和1.25 MPa的一般用固定及其改装的移动螺杆空压机。额定排气压力不大于1.6 MPa的其他螺杆空压机亦可参照本标准执行。本标准不适用于一般用变频喷油螺杆空气压缩机。

Oil injected screw air compressor for general use

JB/T 11883-2014 CNG母站及子站加气用增压压缩机

本标准规定了 CNG母站及子站加气用增压压缩机(以下分别称“母站压缩机”及“子站压缩机”或统称“压缩机”)的术语、型号和结构型式、要求、试验方法、检验规则、标志、包装及贮存。本标准适用于额定排气压力为25 MPa、电动机功率不大于355 kW的母站压缩机及电动机功率不大于90 kW的子站压缩机。对电动机功率不在此范围的压缩机可参照本标准执行。

Primary and secondary CNG filling station with pressurization compressor

JB/T 10281-2014 消防排烟通风机

本标准规定了消防排烟通风机(以下简称通风机)的要求、试验方法、检验规则、标志和包装。本标准适用于安装在各类建筑物机械排烟系统内,发生火灾时起排烟作用的轴流、离心和斜流通风机。本标准不适用于消防排烟风机箱和兼有排烟功能的隧道用射流风机、地铁区间隧道内用的地铁轴流通风机。

Smoke and heat exhaust fan